FH Group Automotive Seat Cover Universal Fit Rear Seat Cover Sports Solid Black Seat Cover for Back Seat Split Bench Car Seat Protector for Dogs and Kids, Car Interior Accessories for SUV Sedan Van

I did not expect this set of "universal" seat covers to fit my car so well. (2001 Lexus RX300). They are a major upgrade to my car's interior and one that, unlike vehicle upgrades to the engine, I get to visually enjoy every time I drive. The directions are helpful and the company welcomes installation questions. You can even request an extension piece from them if your situation calls for it. Pretty cool!The rear bench/backrest cover is a well thought out design with several zipper options to accommodate different section splits, arm rests, drink holders, etc. I added some length to a couple of the attached support straps so that they could reach a good connecting place underneath the seat.I did have to cut a small opening for the armrests of each front seat, but this was quite easy to do because the foam material used to make these seat covers doesn't fray or run when it is cut. (Put seat cover on with arm rests up. Mark the spot to cut with a piece of chalk. Remove seat cover. Cut out hole with sharp scissors. Pull arm rest through the hole as you put the seat cover back on.)Using a long upholstery (tufting) needle (easily purchased on Amazon) will give you the option of slipping some support straps underneath trim attachments or other various barriers for a more precise and customized look.(Clip one of the metal clasps provided with the seat cover set, through the eye of the tufting needle. Support strap ends, loops or buckles can then be secured to the end of the tufting needle using the clasp.)My Lexus feels brand new! I am so glad that I purchased these seat covers!

Fits my 2012 Ford Focus SE pretty good, but not quite like a glove.The front seat covers fit well for me. At first I thought the fit would be awkward, but once I sat in the seats and wiggled around a bit, I noticed the fabric molding to the seat shape better, and now I think the front seats look great! On the outside of the seat part of the front seats there is a plastic part that wraps around and which the seat cover can't really go over. I tucked the fabric of the seat cover between it and the seat (watch out for pinched fingers). That seems to hold the cover in place pretty well. The velcro slit at the top of the cover also helps the headrests attach without having to cut holes in the fabric, and I appreciate that.The back seats are another story. The seat part of the back seats went on pretty easily and snug, although there is a little bit of extra fabric at the front side corners. Using the elastic loops with the little metal hooks included helped but did not get rid of it completely. The upright part of the seat was the most frustrating. I can't seem to get the fabric to securely hook under the outer bottom corners of the seat, and there isn't an elastic loop there, which could have helped tremendously. I also have had trouble lining up the colored stripes on the seat and backrest covers, and eventually gave up. There is a zipper which allows BOTH the backrest and the seat to split as necessary when laying only half the seats down, and there is another zipper which allows access to the middle seatbelt, which are nice features.It seems that for the back seat backrest, you DO have to cut holes if you want to put the headrests back on. The packaging states many times that the fabric won't rip even if you cut holes in it, but I haven't been brave enough to cut holes yet. I might go back and try to readjust the backrest cover sometime for a better fit, before I cut holes. I did NOT need to cut holes for the backseat belt buckles. It took a little fiddling but I got them to successfully pop up between the covers. Also, adding the covers did not interfere with the seat and backrests latching securely into place when returning them to their proper position after having had them laid down.Installation time for me was about an hour and involved a good bit of climbing about, around, and in my car. Non-flexible or extra-large people might want to find someone to help them out. An extra pair of hands would have been useful. The included directions are decent, but the illustrations pretty poor. The directions also include where to watch a video online of the installation. I chose not to watch the video, and still figured out the installation ok.I also got the beige/black covers, and can report that (on my monitor) the color shown on Amazon is very close to the color of the actual product.Nowhere have I found information on if these covers can be tossed in the washing machine, or if they must only be spot cleaned. Maybe I'm not looking hard enough.Overall, I am happy enough with my purchase for the price I paid. I just wish the backseat backrest cover was a little easier to install, with a better way of securing all corners of it.

I do not write reviews very often. BUT after reading some of the comments that were made I felt I need to add my two cents. First off the vehicle that I purchased the covers for was a 2015 chevy silverado 1500 w/ z71 package. red truck black interior , so the color worked very well.About the product. I took me longer to unpack the covers from the package then to install the front buckets. Removed headrest slid coves over seat grabbed strap and looped to underside of fronts seat cove, Adjusted the fit a little , tucked some of the cove between the seat and plastic trim. Front seat look great. The back took a littler longer , function of the truck, seat were bolted to the floor and locked to the back wall. I found it the easiest to remove the seat from the truck and work on it out side the truck. I have a split bench , all the extra filler pieces had zippers , went on very easy and fit almost perfect. after a little tugging and moving all lined up as the picture showed. The people that have seen the truck all comment on how cool the color looks . One person thought they were factory seats. he was so impressed he purchase a set for his truck. I can not tell you how long they will hold up it has only been a coupe of weeks. So far they stay in place , look good , were reasonably priced, and keep the dog fur off my seats. no problem with his nails on the seat as of yet. All the people who had negative things to say , may of had problems , but I for one would purchase again , and would recommend to friends and family. Also not short any parts , or anything.

Los compre para los asientos de una camioneta gmc terrain y sus multiples sierres me permiten utilizar todos los espacios que tiene tal es el caso de portavasos en asiento trasero solo subo el cierre y bajo el area.. Tal como se muestra en la publicidad. Los recomiendo.

I’m quite happy with this rear car seat cover. I was happy to see that I could have access to the rear seat cup holder with this car seat cover and I’m also happy with the fabric which seems durable. I might purchase another one for my other vehicle.

Simplemente ajustaron al 100% en los asientos y tal como lo marca en la aplicación... Hechas A la medida para el VW Gol Sport

El material es buenisimo, solo se está haciendo bolitas a la tela, pero de ahí en fuera es perfecto

Muy bonitos Buen precious calidad