Home Decorate Modelling Crown Mouldings Trim Flexible Molding Ceiling Border Line Interior Decoration Wall Picture Edge Waist Door CasingCorners 2.36" x 0.24" x 115"

I used this on a bathroom mirror that had a discolored section all along the bottom edge from long term water exposure- due to 3 kids taking long steamy showers over 20 years. I used contact cement directly on both the mirror glass and the strip and taped the ends down overnight after install. Looks great and has stuck to the mirror with no lifting. The strip was thick and a bit hard to cut cleanly, so I switched from a knife to a single edge razor blade and slowly pushed the blade into the strip until it parted- this left a nice, clean cut edge.

We were placing it just below an existing plain ceiling cornice to add some detail which it achieved very well. The product is made from a thick rubber and is quite heavy & our first attempt was disastrous. We eventually got the knack of it by having 2 of us to hold, apply liquid nails and apply tack pins underneath to keep it supported and in place. We also needed to apply a caulk between the roll and the cornice to fill in the small gap due to the rounded sides. After numerous undercoats and paint coats, the final result looks great. However in hindsight, given the cost, the fiddling around applying it and the numerous paint coats required, it probably would have been cheaper and easier to demolish and replace the existing plain cornice with a decorative plaster cornice.

This product was so easy to install! I tried liquid nails and it was not drying or staying up. So I had some DAP Kwik seal in clear on hand from another project and used that instead..I used small Brad nails every 3-4 feet. The DAP Kwik seal caulk dried fast and it's clear. I've never installed moulding before but it looks professionally done and I did it in just an hour! It is a thickness similar to wooden trim so it looks genuine. I wish there were edge/end and corner pieces that match available to purchase. Guess that is my next Amazon hunt.

This was a easy product to work with. I chose to paint it and it took well. I wished that it had come with an adhesive back that would have made it an outstanding product.

It worked well in my bathroom. That being said, I used it where I could have used traditional moulding. I feel like it is intended for a surface that stiff molding cannot accommodate; curved surfaces. So, the price is a bit high compared to straight moulding, but on point got this type of moulding. So, if you need a special curve or bend, then this is perfect. I glued it to the wall. It stuck without slipping. I used liquid nails paneling adhesive. I painted it with a gloss paint. It took the paint easily, have to work it into the fancy bits. But way pretty when painted.