Smedioks Soft Plastiс Mold Lure Making Injection Molds Fishing Lures 3 Cavity Yama Senko 5''

These molds work really well. I bought 2 and I noticed 1 of them produces noticeably shinier worms than the other. Not a big deal but something I noticed. Already made a bunch of worms and took the boat out and caught a handful of bass with them. My kid really loves being creative with the colors and even caught his PB on a worm he made himself. Good stuff.

Makes a good bait but if you want that professional finish need to go up to an aluminum cut mold. The stone and cast aluminum molds give a dull finish to the bait. But these work I’ve made dozens and they catch fish. Shoot this mold in the 300° range if you go much higher you will start to see dents.

These are the only molds I’ll use now. No flashing when filling, no dents, and no sticking to the inside of the mold. I’ve used a few cheap 3D printed molds and the quality of these beats any other one I’ve used. You guys rock! I’ll only be buying from you guys from now on

I heated the mold as required to 115°, I heated the injector the same, I used 2 clamps to hold the wobbly mold together after greasing it. I injected it after it reaching 355° going at 30 sec intervals. The senkos have bad seems as you can see in the picture and had air bubbles inside them or dents in the outside. I suppose the dents and air could be the material used but many were tried, the seems are caused by the play in the pins on the mold.

I’m not sure if it’s me that’s the problem but I keep getting dents in my lures, I’m making sure everything is heated up and I’m still getting dent I’m just wondering if anyone else is getting this problem?