5/6 Inch LED Recessed Light with Night Light, Dimmable, 9W=85W, 3000K Warm White, 700LM Recessed Lighting Downlight, Damp Rated, Simple Retrofit Installation, ETL Listed - 6 Pack

UPDATE: I've had these installed for several weeks and I am still quite happy. I just recently added a Lutron Caseta smart dimmer control to control six of these bulbs in my kitchen. I am happy to report that these bulbs work perfectly--no humming, buzzing, or flickering. Perfect. Lutron Caseta has a list of bulbs approved for use with Caseta and these are not on the list, but I can confirm that they do work perfectly in my application. There are so many choices in this lighting category that it's hard to make a decision. This product had good reviews and the price was right so I decided to give it a try. I just received the product and I immediately set out to install them. It's a pretty easy, straightforward process. The lights come with two different kind of attachments--the clip style which is installed and the spring loaded style. Your existing cans will dictate which type you will need to use. Mine use the spring loaded type which means that I had to remove the clips and install the spring type. Takes two-three minutes per light to change using a screwdriver. No big deal. Once the clips are installed, just connect the included E26 screw in adapter, connect to the light fixture and pop it into the recess. The springs are very stiff and I found it easier to latch one side at a time. Very simple install. A few notes. These lights fit both 5" and 6" recessed cans. The attachments can be adjusted to fit either size. The lens/bulb on this light is about four inches and the rest of the fixture all trim so it looks much smaller and sleeker than the original bulb style. I think it adds a more contemporary look. The trim is actually metal which is nice. So many of these are all plastic which can fade and yellow over time. I like that these are metal as it gives them a quality feel over plastic. The kelvin color can be adjusted with a switch located on the top of each light. This is a really nice feature since it's hard to know exactly which color is best for your location. I tried each setting BEFORE seating the light into the recess otherwise it's a bit of a pain to access it. It's not something you are likely to change often, but it's nice to know that you can. If you want to control this remotely, you will need to spend 4x as much for a smart bulb. Not necessary in this case. Overall, great product, excellent value. Fast shipping as always with Prime. Cannot comment on longevity as they are new, but I expect I will get my monies worth.

If you have the right sort of existing pot light fixtures already installed, these LED bulbs are simple to install. My current pot lights have a "stepped" and tapered interior (see photo - black arrow denotes the "steps" inside my pot light fixtures) and the springs that come attached to these replacement LED lights goes right into place very snugly. If the interior of your existing pot light fixtures is curved and smooth, it could be an issue to install - every situation varies. The 5 way light adjustment switch on these LED's works phenomenally so you can dial in any ambiance you want or change the setting in seconds if needed. Prior replacement of another brand of LED lights (NOT these LED's!) I've used in pot lights required me to screw the LED bezel to the existing pot light in two places and that's a real pain, especially considering that I'm changing out 46 pot light bulbs! The first photo on the left shows the new LED lights on the brightest setting. The second photo on the right show the "steps" in my existing pot light fixtures that allows the LED light springs to catch and hold the new LED's in place. I really like the ease of installation and the adjustable Kelvin output switch on these LED's - very well done!! As I mentioned, your experience may vary - good luck and I hope this review helps!

Great color selection, very easy to use and install. Low Profile in the ceiling and the unique interior ‘movie glow’ ring is a nice touch to make it nearly hidden compared to most others where the ring is on the outside. Would be 5 stars but they tend to slide down over time and just need to be pushed back into the ceiling hole.

Easy to install and look great

I was skeptical at first due to the low price. However upon receipt, I was impressed by the design and materials used. The cover isn't plastic, but rather steel. Installation is a breeze, it takes a couple of minutes to attach and adjust the connectors, and then second to screw in the socket and fit. Light quality is excellent with 5 color ranges to choose from ranging from ice white to very warm, and the brightness is also great. Lastly the dimmability range is also good for LED, using both Lutron Maestro as well as Lutron Caseta. I would highly recommend these!

There were some interesting reviews so was hesitant but gave them a chance. Super easy to install and no issues with them not sitting flush like some said. I believe the people who have this issue most likely had the bulb socket not supported and had it sitting on the top of light. I had that issue on my first one I installed and fixed it and no issues. The night light feature is such a great idea.

I bought these to try and block the cold/hot air coming into the house from the attic with the pot lights. Definitely makes a difference and works. I've had them for a year or so, now. Can't remember for sure. I also bought a slide dimmer and it works great with these lights to dim or have full brightness and also set it for night lights. I really enjoy these lights and am very happy with them.

I decided to change the color temperature of my existing down lights. It was nice that these allow me to choose between 4000K and 5000K, since I wasn't sure which one I'd end up liking. The 6500K setting seems like it's more for retail or industrial settings, but having a choice is really nice. They're very good value overall. A couple of minor areas to improve: 1. They are ever so slightly smaller in diameter than most down lights, certain they were smaller than mine. Not a major complaint, just something to keep in mind if the plaster around your existing cans aren't perfect since they'll get seen a bit more. 2. They don't come up a cushion between the light and the base, leading to a potential gap. Other lights I've purchased come with said cushions to dampen noise and to block off cracks that insects/spiders can crawl into (don't want webs in your light cans). I ended up removing them from my existing lights. Again, not a major complaint. Overall, for the price and ability to choose from 5 different CCT settings, these are a good buy.

Updated these LED light from my old 6" portlight. The instruction are NOT very good but it look very simple to install, except if put the spring inside the old housing it will not sit flashed again the ceiling like some other reviewer mentioned. You need to put the spring in-between 2 small clips inside the housing so it will sit tight again it. If you don't see the small clips, you may need to bend the clips out 90 dec. with a flat head screw driver, in most case you properly need too do that.

It's a 5 star!

Look nice and work great. Easy to install.

Easiest thing ever to install and look great.

A great kit, adjustable colour temperature lets you choose exactly what you want.