OVERTURE PETG 3D Printer Filament 1.75mm, Neatly Wound Durable PETG 1kg Spool (2.2lbs), Strong Toughness Filament, Dimensional Accuracy +/- 0.02mm, Fit Most FDM Printers (Starry Blue)

Models keep warping when using this filament, but for the same model when using other filament is okay. Would not recommend it, waste of money and your printing time

I do a lot of printing for my RC hobby and I decided to try this for some upcoming printable airplanes. This stuff prints better than my PLA from Hatchbox. At the right temp, it prints smoothly with no stringing, great layer adhesion and bed adhesion. Will definitely be buying more when I run out!

If you have ever tried to print 'glass' on an FDM printer, you will be familiar with the frustration and poor results that are usually obtained. Well, with a little tweaking of settings, making sure all lines and supports are printed in the same direction, high temperature and no cooling. This product with careful settings will print the closest thing to glass you will ever see from an FDM printer. Almost perfectly clear. Absolutely ideal for all those models out there that have clear parts or just as an interesting effect for ornaments and gifts. It does take a while to print, but the result is worth the wait. This product is the only one I've had consistent success with and that has printed perfectly every time. Be aware though, you need a HOT temperature to print with this, so it won't work in printers with a limited temperature height. Great price for a great product. Especially as it actually works.

I used Overture Rock White PETG for a larger 'functional' print, and it's worked out quite well. I have Bambu printers which print pretty fast - too fast for this filament. My first print I could pull apart quite easily with bare hands. Instead, I found at 0.2mm layer height with a 0.4mm nozzle, I had to keep the speed to 150mm/s or lower. At this speed the quality was excellent, and the print seems to be as strong as any other PETG print. The behaviour seems to be the same as normal PETG, and all that entails (flex, less brittle than PLA, etc.). Appearance-wise I think it's pretty stunning. It is a very vibrant white which is what I wanted. I've provided a photo comparing this Rock PETG to eSun PLA Marble. The surface is matte rather than shiny, which is unusual for PETG. The surface feels rough to the touch, rather than shiny and smooth. The 'black' pieces I think are very shiny because if they reach the surface they appear somewhat mirror-like. Occasionally this can result in a blemish on the print. I think a piece gets briefly stuck on the nozzle and drags for a bit. This can result in a line or 'divot' where it was dragged. I'm not sure if you need a hardened nozzle when printing this. I would follow the general rule that if there's anything else in the filament (glitter, fibres, etc.), use a hardened nozzle just in case.

Have used this filament for a ton of prints and prints great at the specified settings with no bunching or clogging. I use a heated bed which works great at 80, and you can forego the build plate included.