KawellUniversal 2 Lead LED Light Bar Wiring Harness Kit with Fuse Relay ON Off Switch for LED Offroad Driving Light LED Lamp Fog Light Work Light 12V 40A Waterproof

Wiring kit works as it's supposed to no big issues aside from the on of switch. The adhesive is basically pointless stayed on for less the 5 seconds. Not a big deal for me I have a switch I'm going to just hook it up to on my dash. But other then that works great very easy straight forward to install. Plug and play set up. Cord length is perfect actually have more than enough. Would recommend.

This harness is great for the smaller wattage rated LED lights. It's a shorter harness and is more of a light duty type for use with two 18w-27w LED lights. I used this harness for the windshield hinge lights on each side of my jeep. I didn't need a long heavy wire harness for this area. The lights are so close to the power source and switch placement. This harness was very easy to install for the application it was used. I couldn't build one as fast or what this cost. As with most of these pre-made harnesses, if you have problems with the switch or don't like it, it's very easy to replace the switch with one that suits your needs

Love it. This Harness is well worth the Money. I have read a handful of reviews about the Switch and Relay being Junk and i can Tell you First hand from my Experience that the Relay has Performed rather well over the last 2 weeks of constant use, As for the switch i am Replacing it with a Rocker style switch in the near Future. but for now it serves the purpose However, upon hooking up you will notice a Red/Green light Constantly on (On & Off )Which is helpful When determining the location so you don't get blinded at night by the constant glow. All-in All i am Very satisfied and will be buying another for my Dakota. I used these with the Cree 18 Watt Foglights on my Jeep Cherokee.

Wish I would have found this a long time ago. Ive been making my own harnesses for years and its not hard but it does get to be a pain in the rear. This showed up on my door step and I honestly wasn't expecting much, I thought there would be tool marks all over it and the switch would be trash but man was I WRONG.Every thing comes wire loomed so theres no mess in the engine bay, all the ends have heat shrink on them and over all it feel's like something OEM. A few people have griped a little about the red led on the switch and I don't find it to be all that bright. (If it bothers you a little creativity with some black paint could help you) another tip with the switch is if you decide to use the double sided tape make sure you prep the area your sticking it too with a little rubbing alcohol on a rag first. It sticks very well to a clean surface and not at all to a greasy armor alled one.I had plenty of length from the leads to the light and through the firewall to the switch. Which brings me to my only suggestion for improvement and that is I wish the lead to the battery were a little longer. I ended up adding about 2 feet to the battery positive lead. Not a big deal at all though. Great kit ill be buying these from now on when I'm wiring auxiliary lighting! I used this to wire a single row 31" led light bar.

I bought this kit to wire some Kawell LEDs on my Jeep WJ.Pros: Very easy to install, came with a helpful diagram. substancial wire, coating, connectors, and switch.Cons: Everything was just a LITTLE too short to run the lights cleanly, and I was only going from the top of my hood. If t=I have been putting them on the front of my vehicle (i.e. as fog lights), it would have been impossible without splicing in more wire. Also, the provided switch has and LED indicator light that is on at all times, even when the Jeep is off. It is a small thing, but it bothers me...Overall: A heck of a lot easier to rig up than going from scratch. Very affordable. I would buy again, but would also get some additional wire to add in.

This wiring harness is everything I could have wanted and more. Robust, good gauge wiring. Should fit any application as suggested by this seller. I will do some alterations to shorten some of the wires because mine shall be mounted on a motorcycle instead of a car. I like the fact that I can change the fuse to what my needs shall be. I actually liked this so much I've ordered a second one for a different vehicle.

Used for my 2008 Ford F150 aftermarket fog lights and light bar. Easy to install and controls both set of lights.

Overall, the quality of the harness appears to be good....although I have not yet mounted it....the reason I am so long in getting it installed is because there are no instructions included....and it has taken me a few days of roaming the web to find a wiring diagram that made any sense. I am using it to install running lights on a Honda VTX1300C motorcycle. I needed to know the identity of the legs on the Relay because I need to wire a trigger from my bike's headlights so the lights will go off when I crank the bike. This relay does not have the terminals identified....I finally found a diagram of another "universal harness" that is the same as this Kawell which showed me that the long white wire goes to the switch and thus can also be wired as the trigger wire.... Including a set of decent instructions or at least a web link that contained such is not asking too much!!FYI, although I have only tested the following instruction and have not installed the harness, it appears that the long white wire goes to the switch and/or used as the trigger wire, the red to the battery, the short black to ground, the long cable with white and black wires to the lights.... I have read that if the red hot wire is not connected to a switched "+" wire or terminal the small light on the switch stay on all of the time and will run your battery down....so I am not sure how I will hook that up....

Very nice harness, very high quality! Solid connections with tough wire wrap over entire harness. Harness will provide power even with ignition off. I removed wires from relay switch on/off circuit & replaced with leads from my ignition for power only when machine is running. Overall great harness that I'll definitely buy again!

My order came fast , install was easy with the wiring harness I ordered also although it would be short if it was installed on a truck , mine is a Chev van . The only thing I would recommend the manufacturer would use is Allen Head bolts on the angle adjusters , the regular bolts are very difficult to access with a wrench or socket once the units are mounted . Otherwise , nice and bright , I ordered these with the amber removable covers for light options. I left out one star for the adjuster bolts .

A real nice kit, made wiring up my ditch lights a snap, took me literally 15 minutes to finish. Connections are solid and the wiring nicely insulated, would buy again for my next set of lights.

Perfect little harness. Lots of length for what I needed. Well put together.

Switch feels very cheap. Not sure how long it will last with extended use. The leads to the lights is very short. Only can use (without modifying) for front mounted lights. Description should specify this.Other than that, everything works as expected.