HALF OFF PONDS Submersible Water Pump, 1,200 GPH Pond Pump with 33FT Power Cord and 17FT Max Head, 144W Ultra Quiet Energy Efficient Pump for Koi Pond, Fountain, Waterfall, Water Garden, Skimmer

💧 5-Star Review: Powerful, Reliable Submersible Pump—Built to Last! This heavy-duty submersible pump has been a fantastic addition to my pond setup. It delivers strong, steady water flow and easily handles the job of circulating and filtering a large volume of water. Whether for a waterfall feature, filtration system, or just general water movement, this pump gets it done. The construction is solid and durable—clearly made to withstand long-term use underwater. It was easy to install right out of the box, and it’s been running quietly and efficiently ever since. I especially appreciate that it doesn’t clog easily and can handle debris better than other pumps I’ve used in the past. It’s exactly what I needed for a larger pond setup, and I have peace of mind knowing it’s built for continuous operation. If you’re looking for a reliable submersible pump that can handle real work, this is the one. Highly recommend

Removed the old pump, installed the new pump a week ago and it has been working quietly and effectively for 24 hours per day for a week. I assume it is pumping about 2000 GPH but have not guaged it. I also assume (!) it will continue to work for several years.

I purchased this pump 5 years ago and it has done an awesome job running day and night without stop. I'm not always the quickest to get trash out of my koi pond but I do use filters effectively and this pump, in spite of having muddy water now and then, has been run in relatively clean water. Recently the impeller shaft broke and I think it was largely my fault when I pulled it out of the water while running. In all likelihood I will try to contact the seller and get replacement parts for it. In hindsight the price was a little high if you shop around online.

Bought this as a replacement for my Aquasurge 4000 gph pump. It worked beautifully except I had to make some adjustments to get the height correct for my pump well in particular. You should know that the feet at the base DO come off if you open the filter and unscrew the 2 screws. Make sure to replace the rear cover and front filter afterwards. For my situation, I needed to use both the pipe adapters to translate from the pump to the piping I had in place. But that made the system too tall for the pump well. Thankfully, it was easy to use a hacksaw and cut off a bit of extra threading on the black adapters until the height was just right. Hooked it up, submerged it, screwed everything in, and my pond is back to normal again, same flow, fish are happy. For $180 compared to a $400+ replacement for the name brand AquaSurge, I consider this a steal even though I had to mod the adapters. If you're at all considering this as a replacement for your more expensive pump, go ahead. Even if this burns out a year or two in, it will be easy enough to replace and it's SO much cheaper.

This pump was simple to install. Did require me to do some work with the existing 3 inch PVC assembly as this pump has a Female receiver, and my old pump was male connection. The pump says 10,000 Gallons per hour, but it’s definitely not pumping that. It is clearly not pumping as much as my old Tidal wave TT9000 was, and it is at least 25% larger, but surprisingly quiet. It is just enough to power the waterfall adequately and for the price I can’t complain. As for durability, I will follow up on that later. This will run 24/7 365 until it fails.

Needed a new pump as my current one broke (rattling) and went without a pump for almost a week, but thank you Amazon for quick shipping!! This thing is very heavy with flimsy feeling plastic but I guess if you don't move it much it is ok ? I attached a nylon rope to it for accessibility. The pump has replaced a 500GPH pump and, being new to this, I tried to use the old hoses. YES, I could continue to use my 1" output hose. NO, I could not use my 1" input hose. This in fact caused the pump to get somewhat warm and I turned it off immediately. Ran it as-is till I could go to a pond store with bigger size flex tubes. During this time, the screen had fiberglass screen over it because I could still see some stuff getting through and I have 11 gold fish so it took no time for the screen to get dirty. I had to rinse daily. I ended up getting a 1.5" tube for input and attached it to my Matala prefilter easily. Everything seems to be running fine and water cleared up within a day. I tested my water earlier this week (after 3 weeks) with the API water treatment kit and everything was close to perfect (feint traces of NH4 and NO3) but I can't complain with 11 gold fish. Overall, fish are happy so I am happy. The warranty is decent and I bought an extended warranty for 4 more years (no deductible required) for $18 more. Realistically, that is a steal for me. The pump is running 24/7 in FL where it is in partial shade with a screen over the pond to minimize leaf fall as much as possible. Update: past a year and still going strong. I have not turned this thing off for more than 2 min to swap the Matala prefilters!! Working as day 1 . Will continue to update. Update 9/15/2019: This pump has officially died. I bought this in 02/2017. I was out of the country for 2.5 weeks and my friend was left to feed my fish but couldn't put 2 and 2 together and equate that low water line = trouble. Majority my fault but my Matala prefilter was more than half in the air so I'm convinced the motor burned out because he told me the pond had been low for several days ... Granted the claim there is a heat overload sensor but I don't think it works (or maybe it only works temporarily). Anyways, I just want to let you guys know I had this pump running pretty much 24/7/365 in FL except for major hurricanes where I had to cut the power from my breaker for safety. It had no issues but not sure if the Matala prefilter along with quarterly bacteria dump helped with the longevity? I did not touch this thing at all really.

Returned due the motor being locked up. Had difficulty getting a free shipping return label-had to file a complaint to do so.

Pump quality is excellent and functional. Power is enough for our pond and doesn't disturb the plants too much. Noise level is quite compared to our last pump. Design seems good.