BQLZR 17mm RC 1:8 Off-Road Car Star Hub Tires for Running On The Cement Ground Pack of 4

These look good; however are not intended for high speed (over 50mph). The color is a little more green than I expected. I used duct tape on the inside of the tire (between the tire and foam insert) before gluing to simulate a belted tire which prevented ballooning to an extent. Again, good price for driving around the street; however nothing compared to the belted 100mph+ rated tires (which cost a lot more)

Ran a few batteries through my Arrma typhon 3s with these tires/wheels mounted. Took it to a glass smooth asphalt road course and they hook up great but no so much you traction roll in corners. They definitely grip great for asphalt, i only wheelied once, so they slip enough to keep the buggy drivable. On a few corners it made actual tire squeal. I am more than satisfied. Maybe 10-15 laps into the second battery one of the tires became unglued which is expected, lots of weight, power and traction. Re-glued and its running fine. They do not like grass , they will shorten your top speed by a significant amount, so you might need to change pinions. Wears really well considering the abuse.

ABSOLUTE GARBAGE. Tires don't fully seat into the lip of the rim so when you glue them they bulge outward, even used a needle to glue them and they still did it. They bubble up, the foam moves around and breaks inside. They flat spot off. Worst 15 dollars I've ever spent in my life. The rims are made out of extremely cheap plastic could probably break them simply stepping on them. Will absolutely never buy another product from this company. Worst RC product I've ever purchased. Took 4 days to deliver with Prime. Terrible service. Terrible product.

these surprised me with how well they work. the wheel has a lot of flex in it thought i might break it but it holds strong running on 3s lipo the foam in it is very soft like there's nothing in there the 17mm to 12mm hex i have fits tightly in there and amazed the the metal hex didn't strip out the plastic.ran 12 batteries through it and they still have tread on them like new. ran with brushed rustler and brush-less slash 2wd.

These do not provide a lot of traction and are great for drifting as they easily controllable. Great ties to just tear up the streets with. For the price, I already have a couple more on hand.Even though they are low profile, they will still balloon on you after on or around 50+mph. Not for racing or speed runs but great for fun!

These look nice. Put them on my car one time for looks. I noticed the tires are not glued. Also there is no styrofoam inside tires. No problem with me though. I plan on putting that inside tires. Drilling wholes if water enters. Taping tires to keep them from ballooning and lastly gluing tires. You get what you pay for but this seems like a fun project for me so I'll keep you updated

I put them on my redcat blackout xte pro and used 1/8 adapters to install them, they are a bit slippery on the street but they work well for the price

Make sure to get tire glue. These tire cannot handle 1/8 scale cars or speeds above 25mph. But they look good and hold up once glued.Really liked the look on my arrma typhon 6s. Handles the donuts and the drift on concrete.decent tires for 1/10 scale or smaller

Schaumstoffeinlagen erzeugen Unwucht. Felgen zu um weich . Alles in allen nicht wirklich zu gebrauchen