CERAKOTE® Ceramic Headlight Restoration Kit, 10 Wipe Kit | Restores clouded, yellowed headlights, ceramic UV protection, 3-step wipe system, no power tools needed

Everything you need is supplied in the box. Make sure you watch the instructional video as it provides the best techniques for removing the grime and then applying the Ceramic coating. I was amazed as I saw the change in the colour of the headlamps as I started the process. The product really is very good and if you follow the instructions it really isn’t difficult or time consuming. I reckon I had both headlamps done in no more than 45 mins. The headlamps on my 2012 Corsa were really quite discoloured but now look like new units. No scratches, no clouding, just clean and bright. Amazing. I would absolutely recommend this product to anyone - don’t bother paying for a professional as the results from this product are every bit as good and at a fraction of the cost.

What a great kit, absolutely astonishing results from just 3 steps. The finish from just a wipe and 2 stages of wet and dry is unbelievable to be quite honest. That final wipe on product to clear the lens off works miracles. I think I maybe spent too much time perfecting the sanding process, because the final wipe is so forgiving. The instructions were very clear, and provides a link to a video too. There is more than enough product in the kit, and from seeing other reviews online, the shine should be around for a long time. Don't bother with other kits, this is the best overall, easiest to use, quickest and looks to give a top quality finish.

I dont normally do reviews as I tend to forget to do them but I was so blown away by this restoration kit I made sure I did one. Honestly this kit is amazing my headlights on my mazda rx8 were discoloured quite badly tbh but this kit has made them look brand new again and if your a doughnut like me dont worry it is doughnut proof 🤣so simple to use and doesn't need any tools. All you need is in the kit and about 1 hour free time roughly to get the job done. Before I purchased this i googled top 10 cheapest headlight restoration kits and this was number 1 at £17 I think it was. And its worth every penny Honestly if I could give it 10 stars I would. It even has a link inside to a YouTube video explaining how to do it which is great. Use all step 1 wipes on both headlights to remove the yellow stains then put the 2000 sandpad on and do that then use the 3000 one and to finish use the wipes to make it look like brand new again. You wont regret buying this kit. I will definitely buy again if I ever need to do this again. Absolutely amazing 👏 👍

Absolutely amazing product! I'm new to cars having just passed in May and my first car is a 2009 mazda 2 sport. Its had 2 previous owners and its wearing its age.... not exactly gracefully shall we say. The headlights were awful yellow, dull, old and badly in need of either restoration or replacing. I seen this kit and though for the price it was worth a try, if it works then its cheaper than new lights, if not then I know I need either new ones or professional restoration on them. The fact this is easy 3 steps really drew me in as new driver and generally I'm not great at DIY anything (even dying my hair is a challenge sometimes). Still watched the video on youtube before and during just to make sure I was doing it right. Easy was absolute understatement! The results are fantastic! The yellow is gone, they look brand new! Now just to make the rest of car look new.... might take more than 3 steps though haha!

I had tried the old fashioned 'brute force' method of wet sanding from higher grit sandpaper (400 or so) to the highs 2000 and 3000 grits, to the spray coating that would magically turn the headlights like brand new. I've watched many'a Youtube videos on how to do it, step by step. And yet, the most I ever got was a slightly hazy look rather than crystal clear headlights, and the yellowing oxidation restarted about a year later. But this! This s×÷t actually worked! Because it's chemical based removal of oxidation, rather than brute force rubbing until your wrists die or your arms fall off (whichever one happened first) it makes it that much practical, faster, and easier on your body parts. I followed the instructions to a T, and despite some 68k mostly positive reviews and more than enough wipes to cover each step, I was still skeptical if it would work on my 26 year old MX-5, and it did! As I applied the final ceramic coating, the crystal clear transparent sharp whiteness of the headlights came to life! Not a speck of yellowing oxidation, just brand new 26 year old headlights. Follow the instructions rigourously, get into those corners, rub/sand in the pattern that Cerakote recommends, and make sure to watch their instructional video linked in their QR code (highly recommended as a visual aid), and your headlights will be right as rain! Grats! Your car now has brand new eyes!

Brought as my old 2015 citreon c1 lights were looking a bit dull and yellow. It's so easy to use just follow the steps, thats it! I did tape up my lights first though as I didn't want to scratch my paintwork, then used the step 1 wet wipes on my lights, it looked like my lights were nicotine stained! Step 2 was wet and sand the lights down, I used a little water spray bottle and it worked a treat, after repeating the process with both the 2000 and 3000 sandpaper you just rinse and dry, remember to trust the process, your lights at this point will look cloudy and ruined! After waiting 5 mins I used the step 3 wipes and thats where the miracle happens! The lights looked brand new and shiny again! This product is so worth the money, you dont need to be skilled to do it, just read and follow the instructions. Brilliant product at a cracking price!

Initial impressions are great Instructions are easy to follow and the kit almost everything you need to complete the job, but I'm not sure how long the results will last and what I'll be left with in a few months time. My headlights were very badly damaged by the sun, all yellow and lots of water staining and fog. You start with wiping the lights down with a chemical covered anti oxiden wipe. You get 8 of them in the pack, 4 for each light. You are warned to remove the chemicals from any bodywork as soon as you can... this is where the kit would benefit from including a roll of masking take or something to protect the area around the light. I ended up using my own tape to cover the surrounding area before starting. The wipes do a fantastic job on their own. But to get the best results, you need to carry out the other steps. Step 2 is to sand the lights with the provided wet and dry sand paper and sanding block. 2000 and 3000 grit discs are included. You get 2 x 2000 and 2 x 3000, one of each for each light. This takes time to do right and not damage the lights. This is the hardest part. Take your time and don't apply too much pressure. After multiple passes you will get a good result. Once sanding is done, you will be left with headlight that look quite foggy from the micro scratches after sanding... and you might be worried about what you've just done! Steps 3 solves that. Apply the last wipe, you get two of them, one for each light. Once this wipe of chemical has been applied the lights will look immaculate. My only concern is how long until this chemical washes off/needs a top up? You only get two wipes in the pack. Say it lasts six months, how can I top it up? They look great for now but we will see how well it holds up over time. I have attached a before so you can see the results. This was half way though the process with one light finished and other untouched. You can see how well it's come out. Wholly recommended, but buy some masking tape to mask up and save your paint work from scratches and chemical contamination. And be prepared to need to find something to refinish them again in a few months when the finishing coat weathers off.

Good grief, it actually works! How wonderful to find a product that does what it claims. However, that 30-minute claim is a bit optimistic - it took me at least twice that. The real work is all in Step 2 - where you rub the lenses with 2000-grit, then 3000-grit abrasive. It took me ages to get rid of all the blemishes and get the lenses to a completely smooth finish all over. I had to find some extra 2000-grit paper; I would like CERAKOTE to put an extra couple of 2000-grit discs in the box. The final Step 3 is great. After rubbing with 3000-grit paper in Step 2 the lenses look dull and misty. Then you apply the final Step 3 wipe, and instantly the lenses turn glassy clear, like they were brand new. Very cool! You must follow the instructions to the letter. Watch the tutorial video twice before starting the job.

Nice and good

I used this headlight restoration kit and the results were exactly as mentioned in the product description. My car’s headlights were yellow and dull, but after following the steps in the kit, they became clear and bright again. The process was simple, and all the required materials were included. The final finish looks almost like new, and the light output has improved a lot. Definitely worth the money and highly recommended for anyone wanting to restore their headlights without replacing them.

Prima produkt

Works.

Très efficace, relativement facile à effectuer avec la video (compter 1h30 en tout avec la préparation), ne nécessite pas de matériel complémentaire si ce n’est du Scotch papier type peinture. Le résultat est bluffant, à voir sur la durée. Prix imbattable par rapport à la même prestation effectuée en garage (100€ minimum).