GLL Super White 5050 48-SMD LED Panel Dome Lamp Auto Car Interior Reading Plate Light Roof Ceiling Interior Wired Lamp + T10 BA9S Festoon Adapter-10PCS

ABSOLUTELY AWESOME - For a way to increase interior light maybe a hundred fold (A LOT, anyway) - ACCEPTING THAT identical shaped LED subs for OEM interior light incandescents ALL disappoint, and ACCEPTING that some creativity in placement of the LED grids may be needed- possibly even (in a single extreme circumstance- later) placing the adhesive backed grid- attached by fine, few inch long wires to the OEM bulb connector, so placement is easy and flexible. The light grids are flat, sturdy and large (see specs) but the LEDs are mounted on the grid adhesive backed board and otherwise unprotected. This means they require the same care a felt headliner or cloth seatback would need. I wouldn't touch the headliner or cloth seatback with wet or soiled hands, (and would try to avoid unnecessary contact anyway) and wouldn't recommend touching the light grid under similar conditions either. And if hands are wet and light grid is on, the 12v you could possibly contact could be an annoyance (or worse). These are BRIGHT. The interior of the Forester resembles parts of an airport or nightgame-lit sports arena. We love it. The rear cargo area interior light designers either weren't given or just couldnt feel the love that seems to have designed the rest of the car. The light in the rear cargo area on my 2016 Forester was so feeble, and the light fixture's puny size (so no bright-enough-to make-a-real-difference upgrade replacement can fit in the mini light fixture without melting) makes it seem like the only reasonable explanation is that it's meant for Military Use by personnel wearing Night Vision Goggles who would be blinded by more tha 5 lux. So I knew I couldn't fit the grid into the fixture, but the long lead wire made it easy to stick it to the panel next to the fixture. Then, because there's also incredibly disappointingly NO LIGHTS on the other side of the rear compartment, on the rear headliner nor on the interior of the rear hatch. SO, with only one spot to retrofit without doing wiring, I decided to splice a second LED grid to the supply wire of the first one I installed there. NOW the rear cargo area more resembles a one-side-lighted night sports field. Quite pleased......

I have a 2012 Mazda 3 Skyactiv 6 speed manual, along time ago I got some LED tag light bulbs for my wife's truck but they were way too bright, she hated them. The trunk light in my 3 was a dinky little T10 bulb, I tried a few different bulbs but none of them were bright enough, and the trunk light was only on the right side of the trunk. Since I had these tag lights that we couldn't use, I broke the housing open and stole the LED panel out of it, cut the connector off, added about a foot of wire, then ran the wire through a T10 base off the other LED bulbs I had, and made my own LED light panel for my trunk. With the foot of wire I was able to locate the light panel on a ridge that hid the LED so you couldn't see it or the wires but it was right in the middle and lit up the whole trunk, problem solved.....until recently. Half the panel burnt out and the rest were very dim and flickering. These panel lights were perfect what my trunk light "mod", all I had to do was cut the old panel off the wiring, and add this panel and bam! Back in business! I've only had it in for, oh, idk, say 10 minutes so we will see how it goes. Now that I'm thinking about it I should have cut the connector off the adapters so when this one dies I can just disconnect it rather then having to cut, splice, and solder again. Oh well, next time, still got 3 left. Forgive the janky tape job of the wires, it started raining so I just slapped tape to get the wires out of the way.

These LED boards are very bright. I only bought two the first time because I was skeptical that they would be bright enough for the overhead lights on my boat. I had installed a similar product to replace the incandescent lights on my boat about 15 years ago and they were starting to look a little dim. Before I installed the first one I hooked it up to 12v to see if it would be bright enough and it blew me away. So I immediately ordered a ten pack so I could replace the aging LEDs in the other overhead lighting fixtures on the boat. The bayonet bases provided with these LED devices are not the right size for the double base bayonet plug in my light fixtures so I am having to cut the provided bayonet base off and solder on the leads from the old LEDs. The alternative was to buy marine versions of these devices that cost 10 times at much as these LEDs.

Surprisingly small and quite bright. I would recommend sanding the edges of the circuit board as they are raw and sharp. Ended up soldering a different connector to it and glueing two inside my interior dome light housing. For $10. Works pretty great.

Lights are nice and bright. They come with great adaptors for connecting to existing wiring. I installed 2 above the stove in our camper.

They don't get hot and so far are very dependable, bright and easy stick on strip. Place wherever they are needed.

Got this to replace the rear trunk area light on my 1999 Toyota 4-Runner. Come with 4x LED pucks and 4 of each style connectors. Bulb, T-10, and socket style. The light pucks comes with 3M double sided sticky tape. It is super easy to install and the only thing you gotta watch is the polarity. If you plug the light in and it fails to come on. Then reverse your connection since LED is polarity sensitive.

Bien

منتج سيء جدا و يسبب لخبطة في كهرباء السيارات

Nikel

Ho comprato un prodotto similare in un negozio online di led e xenon per auto. Il prezzo che ho pagato era ben superiore e la resa luminosa nettamente inferiore. Ho messo 6 di questi pannelli all'interno della mia Citroen C3 e la resa è BESTIALE, l'auto si illumina A GIORNO e la luce è visibile perfino durante la marcia sotto il sole di mezzogiorno a maggio! Consigliati laddove si voglia fare luce dove non ce n'è. Migliorabile, forse, il materiale adesivo posteriore (io l'ho sostituito con del velcro plastico 3M).

Montada en el plafon del techo de un jeep wrangler jk.

Es un producto que da lo que la ficha técnica dice luz muy blanca, lúmenes pienso que correctos, con múltiples casquillos para adaptar al automóvil. Yo los compre para iluminar un furgón y estoy muy contento con ellos.