(Pack of 1) Universal 7 Inches High Performance Electric Slim Radiator Cooling Fan with Mounting Kit, 12V, Black

Great product and works GREAT!! I am going to help some people out with wiring this fan up. 1- Black wire will attach to the coolant temp sender. Note do not attach the connector end to a ground unless you want the fan to run constantly. 2 Blue wire will attach to blue wire on the fan for a pull application and the black wire on the fan will be grounded to frame or any place on your engine that can work as a ground. I if you want a push fan just switch wires on fan making the blue wire attached to the black wire on the fan and the blue wire on the fan a ground wire. 3-Attach the white wire to the silver stud on the 30amp fuse block. 4- Attach a red wire to the copper coated stud on the 30amp fuse and run it to a positive wire that will turn off when the ignition is turned off. Or you can run a wire from the fuse block to a toggle switch to turn it on and off. 5- Finally attach the red wire to the positive post on your battery. I hope this helps. Note this fan doesn't come with wiring but you can buy the wiring separately. GOOD LUCK!!

very good, works very well

Worked perfectly, size was exactly what was described.

It appears to me to be as described and of the quality I expected, --good. It's not "industrial" as I define it, but not a "toy" either, --appears as appropriate for intended use to me. I did compare all of this type offered online as well as I could, and from other vendors for my application, '79 MGB. It, to me appeared as identical as what was offered at actually 6x's the price. However again, I could not compare in hand. Nonetheless, in pulling up the pictures provided, stickers, markings and all, sans the Brand-name, looked identical and appears as the same country of origin manufacture to me. The sizes provided, dimensions, are accurate for my application installation. The install kit came with it and was as good as these can come with. Actually for my application I could have installed one as-is, as pull, aligned to one side, and another as push aligned to the other side R/L -- since effectively what I did since I left the one functioning stock fan in place as push with this as pull favoring the radiator inlet/Rt-side. My point is, as this should be, -- is a functional, flexible aftermarket product that adapted well for me as needed. I could have easily bolted it to a simple cowling, and still can if need be in time. I'll expect to get as much service from this as any other I might have gotten with a limited warranty, etc. There is no wiring diagram, or suggested install diagram, and I didn't need one. Nonetheless, due to other questions here, the Blue-wire is "Positive" and functions with the fan blade as delivered, as pull. Since the blades are straight-but-angled, I'm not sure you have to reverse the blades as apposed to reversing the wires. As I did, I suggest testing it prior to installation, carefully since blades are exposed, and those install ties are *one use only unless you order an extra kit, --remember that.

I reversed the fan to push cool air in. One thing to note, if you want to reverse the fan you also should flip the fan blades. The blades are cupped and will not move air efficiently in the opposite direction. Seems to move a good amount of air and be well built, so far so good.

With summer daytime temps here in Arizona well over 110 degrees, my car A/C needs help to move more air through the evaporator. I used two of these and it really help keep the inside cooler since the A/C is now cooling better.

Very Well packaging. Love It!!!

good lower volume fan due to sie, i used for low amp pusher thru condenser, very happy

I mounted that fan under the nose of my race car as part of an auxiliary oil cooler system I installed. Huge drop is oil temp. Very happy.