HiLetgo 5pcs Digital LCD Thermometer Temperature Digital LCD Fridge Thermometer Water Temperature with Probe Fahrenheit

Solid value for the price. I use these to monitor temps inside my entertainment center. With a home theater setup that puts out a good amount of heat, I wanted something simple to help me keep an eye on airflow and hotspots. These thermometers do exactly what I need them to. They’re accurate enough for this kind of use. I compared all five and the readings were close—within a degree or so. The probes are small and easy to tuck behind gear or route through vents. The displays are clear and easy to read at a glance. Only downside is battery life—one unit came with a weak battery, but replacements are cheap and easy to install. Bottom line: if you’re looking for basic, reliable temp monitoring without spending a lot, this is a solid pick. I’d buy them again.

Best little digital temperature readout gadgets. Within +/-1*F accuracy. Good enough for most applications. I typically get a couple years battery use with these in outdoor situations, from -10*F up to +120*F. Not expensive and they get the job done.

These digital thermometers provide excellent 5-star value for the money. However, I deducted one star because the Amazon listing OVERSTATED their accuracy by a FACTOR of 20!! Performance is misrepresented in the “Product Description” by stating an accuracy of “+-0.1”, whereas the box (first photo) clearly states a more reasonable +-2 F accuracy, which the units do indeed achieve. If you bought these believing the “Product Description”, you would be sorely disappointed. (Temperature resolution is also misstated. The box correctly lists the resolution as 0.2F, whereas the “Product Description says “0.1”) I bought two lots (10 thermometers) for household A/C and temperature monitoring. A quick initial test showed that all did indeed display degrees Fahrenheit, all LED display segments appeared to work, and all displays looked crisp with high contrast in normal room light. The displays are not back-lit, so won’t be visible in the dark without some illumination. For quick initial accuracy testing, I strapped groups of 5 sensors together, and blew a boxer fan at them (second photo), allowing time for them to settle. My reference temperature was provided by a 100-ohm platinum RTD, whose accuracy has been previously verified. (It’s inside the small copper tube in the photo.) The RTD temperature was read using a four-wire hookup to a precision meter (photo 3). Results? All units were within +-0.9 F – well within the accuracy stated on the box. One was right on, five read low, and four read high. If time permits, I’ll provide a more comprehensive evaluation. Bottom line: at two bucks apiece, these digital thermometers provide exceptional value.

Works as expected! These little devices are good for checking the tempature inside the chicken House on a hard freezing night! or in the bottom of the Hot Tub. I bought the five pack and they all were within a half a degree of the others. Well worth the price for around the farm when you are worried about water freezing and little creatures getting cold.

Good price, monitor temperatures on solar projects

Perhaps it wasn't for my application in our kitchen. Unfortunately my staff always found a way to break them. But the were very accurate, holds temperature great. Long lasting power easy to set and read, compact screens long wired probe. But I didn't hold up in our busy kitchen.

Originally, I purchased this to check the internal temperature of a clothes dryer, but have since found myself periodically using them for all kinds of temperature ponderings ... Ice chests (block ice versus dry ice), car trunk versus passenger area, freezer, attic, entertainment cabinet, etc. Battery life has been pretty good. I haven't had to change any yet, but it seems pretty straightforward. They each take two LR44 button-type batteries. I didn't think I was going to need 5 of these, but 5 is turning out to be the sweet spot. :-)

With a 10 second update time and a probe with fairly large thermal mass these aren't a good choice for measuring rapidly changing temperatures. If this isn't a consideration in your application, their measurements track well (in 10 samples over the course of three days, mine were within 0.6°F of one another), and within 1°F of an adjacent thermometer of known calibration, which is within the packaging's +/-2°F accuracy specification. There's a typo in the range specification printed on the box which claims -20 to 110°C, and -4 to 158°F (which can't be right; water boils at 100°C/212°F). I've successfully immersed a probe to measure hot water as it rose to boiling, and tend to believe the 110°C (230°F) maximum temperature specification is correct.

It arrived reading in Fahrenheit. I wanted Celsius and there is no way to change it over

Easy to read and quite accurate