LENX 9 PCS PETG Tubing cut and bending tool kit

Great set for doing your custom loops. My first rigid tubing build and every thing worked exactly as it should have. Many reviewers complain about the saw being flimsy. I got the same saw and had no issues with it what so ever. The blade is sharp and when used did not flex or come out of the frame. Getting a straight cut is some what of a challenge but taking your time is the key. The dies for making the bends fit my 10/14 tubing perfectly as did the white silicone tubing insert. A glass of water and a few drops of dish soap goes a long way in getting the tubing in and out easily. The chamfer tool could use a bit of work but it does what its supposed to do and does it fairly well. The rasp has a bit of a cheesy feel to it and is quite wide which helps for removing the burrs you get from the saw before using the chamfer tool. Im not real sure what every one is complaining about. Im glad I spent the 30 bucks for the kit. What would I change? Id separate this set up for hard tube OR soft tube. which would make it more marketable as I was not running soft tube so the white cutters were useless for me. My Build: Mobo- GIGABYTE AORUS GA-AX370-Gaming K5 (AMD Ryzen AM4/ X370/ RGB FUSION/ SMART FAN 5/ HDMI/ M.2/ USB 3.1 Type-C/ ATX/ DDR4/ Motherboard) CPU- AMD Ryzen 7 1800X Processor (YD180XBCAEWOF) Memory- G.SKILL TridentZ RGB Series 16GB (2 x 8GB) (PC4 25600) F4-3200C16D-16GTZR GPU- ASUS STRIX Radeon R9 390 Overclocked 8 GB DDR5 512-bit DisplayPort HDMI 1.4a DVI-I Gaming Graphics Card Fittings- XSPC 10/14 Cooling block- XSPC RayStorm RGB WaterBlock V3, AMD CPU (AM4 Compatible) Radiator- XSPC EX360 High Performance Radiator (Supports 3 x 120mm Fans) Tubing- XSPC PETG Tubing 10mm ID, 14mm OD, 0.5m , Clear, 8-pack Coolant- XSPC EC6 High Performance Premix Coolant, 1000 mL, Green UV Pump- Enermax NEOChanger 300ml RGB LED Reservoir and Pump Kits with Remote Control, Synchronisable RGB lighting via Motherboard, ELC-NC150RGB

The product is as advertised, shipped very fast, and it was new, bending tools are workable, not anything quality but good enough, the PETG cutter is trash and will break the end of the tube if you apply pressure; so no clean cuts with that unless you really take your time with it and cut slowly, the saw was decent and cuts through just like any other saw, the chamfering tool is great and is sharp enough to chamfer the tubes quite easily.

Like a second-hand defective item

Most seem to give this kit mixed reviews while I thought it was pretty good overall. Did my first custom PC water loop and did it all with this kit. Only reason I deduct a star is it comes with cheap plastic zip bag when a cloth bag would have been better and not cost manufacturer much more. Also, while all the tools did what they should, some did feel a tad cheap, but it was cheap so tough to be too hard on that. The PETG angled bend pieces (not sure proper name) helped me get near perfect bends. They do seem to be made for smaller or larger tubing (10/12 or 12/16), and I used smaller which made it feel loose, but didn't prevent me getting good bends. The saw seems the flimsiest, but still cut through PETG very well. Silocon insert fit well, but can't tell how it would do on larger tubing. The clamp/cutters worked well too, but again felt cheap. I would recommend this for someone needing PETG tube handling kit and not looking to spend a lot.

Pretty solid entry level tools. Everything seemed to work as intended. Bending hard tubing is an art. These tools help out a lot. Plus it is so budget friendly.