Hornady One Shot Case Lube, 10 oz / 14 fl oz – Aerosol Dry Lube, with DynaGlide Plus – Clean, Non-Sticky and Easy to Use – Contains No Petroleum, Won't Contaminate Powder or Primers

I’ve used the RCBS lube pad for over 30 years with no issues, just messy. Then I switched to Imperial Sizing Wax which worked better, but it was still a bit messy and I had to keep applying it to my fingers. Recently, I was recommended Hornady One Shot case lubricant. I wish I had known about this or listened to others sooner. This is simply the best case lube solution I’ve come across.Put your cases in a plastic salad bowl (I usually do 200-300 cases at a time), spray One Shot on the cases for 3 seconds, mix them up with your hand, spray the cases again for 3 seconds, mix again, spray rain for 1 second, let dry for a few minutes. Now you are ready to size your cases. Using this method, I’ve not had a stuck case.I’ve used this on cases from 22 Hornet to 45-70 Govt.Try Hornady One Shot case lube, you’ll like it, too!

Use as directed and it performs great

This product is so much easier, and faster to use than the old school case lube! Just a quick spray on both sides, and you’re done. Haven’t had one dent in my brass since I’ve been using this spray on lube, love it.

Works perfectly, use it on all of my cases before re-sizing and never had a problem.

Been reloading for about 10 years. When I started out on a single stage press, I picked up a can of this right off the bat. Over the years, I have tried other products but this one just works. No fuss, no mess, no stuck cases.

Exactly what I wanted, shipping time was great. Thank You.

Great service from the seller. The product arrived quicker than expected.As another reviewer mentioned, read the instructions. Avoid a stuck case! If you do read and follow the instructions you will probably find this is the easiest product to use for case lubing. It's less messy than any other method I have used, and as a reloader for 40 some years, that covers a lot of methods.Is it perfect? I don't think any method is prefect, as they all have downsides. But it'd a great choice for convenience and ease of use.

I love this lube. It is not only convenient to use. It is an excellent case lube. For years I used the standard silicone lube on a foam pad. Which is very messy and hard to clean off and can cause dents in the shoulder area, but not this lube. I just put the cases in a ziplock bag, spray the lube in for a few seconds, roll and shake them around in the bag for a minute. That's it, no need to wipe the cases off. I've never had any cases stick in the sizing die or any shoulder dents. Since I found this I will never go back to the pad. I consider this the hot lick and will continue to use this as long it's available. Give it a try. I think you will like it too.

Comme tjrs ce produit fait parfaitement le travail

I wish we could still get this in Canada, love the product.

Is easy to apply, and doesn’t need much cleanup

Good stuff