SideMate, Vinyl, 4’x8’, Off-White

Arrived it perfect condition. Instructions were very clear and easy to follow. Every single piece was clearly marked. Holes all lined up perfectly, if you make adjustments and then tighten everything up at the end.

Delivers the storage solution we wanted, and materials will not be affected by weather so it should last forever. Installation does take some time and definitely requires two people for part of it. Two day job for me. Need to get ground leveled and then need to buy extra large patio blocks and lay them down to make a foundation, as instructions say to do. Take this cost into account (extra $100 for me). Foundation work took me a day and then shed assembly another day. Docked one star from rating as I expected the shed to have a floor. You need to buy plywood and lay it down in the tracks to have a floor. Would have been nice if some plastic floor came with it, as you already need to buy extra stuff for foundation. All in all a good shed, though.

I was amazed at how well this shed went together. Every screw hole lined up and that usually never happens. It did take ALL day to put together but that's because I had never put one together and did not know what piece I needed next or what it looks like so that made it take forever . There are a LOT of pieces and no words on the instructions so its a challenge sometime to figure out what your looking at. I put the whole thing together myself with my wife holding up the first few side pieces while I screwed in the first supports. Now that its done it looks great and work for what I needed it for. no leaks so far after several hard rains.

Very flimsy and not sturdy at all.

I’m not used to doing a review, but this storage is well made, putting it together is not that difficult for someone who knows how to tighten a screw. The design of the roof is really what Im after cuz you can put it on the side of a wall. Plus the door can be installed left or right.

The shed went together easily. I was able to do it all with just a step stool and screw driver. Directions are self explanatory. I mounted it on a sheet of reinforced plywood with fork lift slots so we can move it around the shop. Does what I wanted which is to keep items in and out of the weather and out of sight. But I wouldn’t consider it a secure or a sturdy unit. It has all vinyl panels so a box cutter could get you into it.

This was a great investment the value for its buck is still paying dividends. However, the assembling process was a bit much, and this did not come with a base platform. We had a crew do the assembling unfortunately during the coldest day of the year!! Mission accomplished payment pizza pies for all.

This product is ridiculous to put together.

Il faut suivre à la lettre l'ordre indiqué par les schémas de montage, ce qui demande tout de même un minimum de réflexion. Si on s'y tient , et si on est un peu bricoleur, c'est relativement simple. Montage en 4/5 heures . Semble léger quand on ouvre le carton, mais solide une fois monté. Nous l'avons fixé au sol sur des dalles de béton. A voir à l'usage pour l'étanchéité...

Very impressed with this shed. Built it in a narrow alley next to our garage, barely wider than the shed itself. Having read the instructions before purchase, I knew there were very few screws I’d struggle to get in. Most of them are screwed from the inside and I managed to unscrew the supports on 3 corners to fit the difficult screws before securing back to the base. Took less than a day. Instructions are clear and it’s very sturdy once built. Did need two people to start with but anyone decent at DIY shouldn’t be afraid at all. Comes with a metal foundation but I built one with 4x2 treated timber and marine ply for the shed floor. Added an extra £80 but worth it.

bonne qualité et conforme au descriptif dommage pour les problèmes de transport

Once the shed is completed it seems solid, However its not very easy to put together. The instructions would beat all but the experienced flat pack builder. Follow the instructions carefully or you will end up in a mess. Under no circumstances attempt it if there is more than a gentle light breeze. What I really didnt like about it was the base. The metal is very thin and SHARP EDGES which are unpainted and will be the first part to rust. I intend to silicone along the edges that are exposed to the outside. One thing you must do is prepare an absolutely flat and level base be it concrete etc. I laid a sub base then used the interlocking plastic grids then spread gravel across them to give maximum drainage. Then a sheet of 18 mm Marine ply that was treated with bitumastic paint on the downward facing side, I built the metal base off that ensuring it was square. Then screwed it down to the ply. It took 3 of us 4 hours to put the shed together with much cursing and swearing. Once it is completed it feels solid enough, but the instructions and diagrams are not the easiest to follow. Dont attempt this unless you are competent with self assembly items.

Une fois monté, le résultat est satisfaisant. Suivre impérativement les étapes pour l'assemblage (manuel très précis) et prévoir plusieurs heures à 2 personnes (sans pluie et surtout sans vent : les éléments séparés sont légers). Expérience personnelle : renoncer à la visseuse électrique, même à petites vitesses et opter pour le bon tournevis à main compte tenu de l'emplacement de certaines vis. Aborder le montage comme un jeu (type Légo, ou plutôt Mécano) sinon c'est la crise de nerf assurée tant il y a de pièces à assembler