7000K Xenon White 264-SMD LED Angel Eyes Halo Ring Lighting Kit Compatible With BMW E36 E46 3 Series E39 5 Series E38 7 Series (Fit Xenon Trim ONLY)

As stated by other buyers they are the brightest I’ve seen, nice color too, no yellow and not too blue, still looks respectable. Install is a little tricky to have them perform with the features of the car (on, off, fade in, fade out, key, etc.) the hot leads are going to need to go through the firewall of the car, I didn’t know I was going to have to do that but it’s more straightforward than it seems. No drilling. Going to have to drop the glovebox to access proper wires for splicing. All that being said I did it in my carport in one eve with nothing more than a pair of scissors, a flat head, and some pliers, and I used some good 3m double sided tape to help affix them in place (highly recommend). So, there fresh installed 6/20/19. I’ll keep this posted if they blow out or I loose led or whatever, so far so good. I’ll post anything else I can think of and if I have time I’ll upload a video of the exact path for the wiring I used and concealment of the wires.

I installed them on a e36 1997 318ti Compact with stock headlights. The wiring is simple I just had to cut the positive from the position light to link up with the provided red wire and connected the angels black wire to a bolt in the chassis driver side which already has some ground cables attached to it. You don't need extra wires, the length of the wires are enough to place them anywhere you want. You need to remove the headlights to do this job properly, remove the glass from them, glue the rings inside, and pass the cables behind (there is a rubber that covers the light connectors if you move it you can catch the cable and slide them outside the lamp from behind) that is the hardest part but there is a lot of videos on the web who shows you how to do that. I used extra tape and silicon just in case, I don't want them to get loose. The Angels are way too bright at night, I hope I don't blind other drivers with this. The quality in general is very good, easy and simple installation, just need to cut 1 cable for power and attach the ground to a bolt in the chassis.

These look so nice but were such a pain to install I have a 2002 bmw 540i so I had to basically destroy the headlight to get the housing apart to install them but they look amazing so it was worth it, especially for not being expensive. They are super bright which makes it hard to take videos of because the camera over exposing it. The fade on fade off feature is so cool and wasn’t too hard to do. I don’t have the foot well lights to wire it to so I took the glove box out and found the wire that gets power for the door lights and the other interior lights and spliced the wire into that and now the fade on/fade off feature works great.

First off, these look awesome. They're absolutely beautiful, the brightest halos I've seen, they look mean and definitely make a statement. The wiring is easy and went without a hitch. They lose a star, because the clips are useless (I got two packs of clips, the clips in each pack were different, none of them worked right). The clips did not fit the part the way the instructions show they should. I managed to get one clip on each part, not real sturdy, and used the double backed sticky things provided to further hold the halos into place, but the trim piece pushes the halos when the headlights move and the sticky things are already unsticking. However, the trim piece also seems to help hold them in place, so I just hope they will remain where they are until I come up with a more permanent solution. That being said, they look freaking amazing. I get compliments all over the place, and I do not regret buying them at all. If you don't mind a lot of head scratching during the installation process, they're worth the trouble.

The lights are excellent and bright. I have a 1994 BMW 318i. The hardest part was dissembling the front headlights. Once i have it apart, I used an epoxy to glue the angel eyes to the lens, then reassembled the headlights. I ran the wires through a notch I made Beijing the headlight unit and siliconed the opening. I used YouTube on connecting the harness to the windshield reservoir motor. That way, when the Car is on, the light run on their own and turn off automatically when the key is out of the ignition. The light are bright, even during the brightest day. It's very attractive and a nice addition to the headlights. I am anticipating these lights will last the life of the car, as they are LEDs.

Very bright halos, today I’m replace my e36 BMW CCFL halos for LED halos. My reason it’s not very bright and blow off inverters. This LEDS halos not need this inverters.

I am rather impressed with the wiring in this kit. Although made as affordable as can be, time was taken to implement proper wiring ideas. Soldering, and shrink tube, proper wire size, and a simple diode and capacitor make a big difference in thought about keeping the product working for time to come. As a experienced 12v tech, I will be making my own wiring harness anyway. The solder joints are hard, and unsupported. The only concern I would have is a customer cracking a joint, and creating an impossible to find problem for them. Fitted and tested the halos. Love the product and seller. Very bright, and unable to see each light (perfect). Clear bright white light!

[SEE UPDATE BELOW] These angel eyes seem to be fairly well made. Definitely better quality than I expected for as inexpensive as they are! Only 'issues' I had: -I ended up using the adhesive under the clips on the top to make sure the rings stayed perfectly centered (I wasn't sure the clips were tight enough to keep the rings from shifting from side to side over time). -I also had to use a knife to shave down the edge of the top of one of the rings to fit a clip on cause the clip was a little too tight to slide on. Didn't take long and wasn't really a big deal. -The positive and ground contacts were a good bit too small to fit on the bolts on the car, so I had to drill them out a bit. Not a huge problem, but it took a little extra time and shouldn't be something you have to deal with. -The only potential concern I had with the quality was where the wires are soldered on the rings. The wires are only supported by the solder, so if they get moved around much, I could see the solder cracking. I am a stickler for quality in details though, so it may very well be good enough to never be a problem. Just the one thing that caught my attention. The good: -The wiring is well made and very easy to install. I was surprised with how well it all went together. -They look incredible! I literally stood in front of my car turning them on and off for quite a while. I still look back at them every time I walk away from the car. The rings also line up really nicely around the headlights. And they are bright! Overall, I love them and would definitely recommend them to anyone looking for angel eyes. UPDATE: Unfortunately the quality was good everywhere but where it really counted... Just after the three month warranty period, a few LED's went out in one of the rings. Within a few more weeks, several more LED's went out on two other rings. I would assume it was just a rare fluke in one of the rings, but being that 3 out of 4 of the rings had multiple faulty LED's, it seems to be a bigger quality issue. I contacted the company to see about a replacement, as it is obviously a quality issue on their part, hoping maybe they would stand behind their product, but alas they only offered to sell me new rings separately for 49.95 I think it was. I decided against it, seeing how well the last 4 I had held up. It's a shame these didn't last... they looked so goooood!

Awesome! Definately the most brightest, almost looks like newer original BMW halos. Wiring a bit tricky better to get some professional help, Very happy with the purchase & results definately will recommend it.

Firstly there’s no instructions, no biggy but something to think about. I wired directly to the washer pump and ground so they are on with ignition and disregarded the ‘fade in’ feature. Had to cut the joining part of the ring cause they don’t fit into the headlight area at all. Otherwise very bright so some top marks in that area!

Facile d'installation et fonctionne très bien.

Overall, I am very happy with my purchase, because my E46 M3 new has angel eyes, and they look fabulous! Kit comes with everything except for clear instructions. Product has changed compare to what is shown in the documentation. Provided T-connectors are quite bad, had to replace them. My biggest gripe was with the wires which are very short. Why do they make them so short? You cannot waist a single inch when rooting them from one side to the other.

Very bright like new bmw angel eyes, but the instructions on the website are not good. I did my own wiring.overall the product is good.