





Feature: Port Size : G1/4" Model Number: 2V025-1/4-12VDC Seal Material: NBR (Buna N) Armature Tube Material: Brass Body Material: Anodized Aluminum Plunger & Spring Material: Stainless Steel Response Time: Less than 20 ms Port Size: G1/4" DN8Operating Temperature: -10 to 80 ยฐC Coil Power: 6.5W Coil Duty: 100% ED (Continuous Duty) Coil Voltage: DC12V, Service Media: Air, Gas, Liquid, Water Valve Type: 2 Way Normally Closed (Valve opens with energized) Flow Rate: 0.23Cv (Fluid Flow), 22 SCFM at 100 PSI (Air Flow) Operating Pressure: 0.05 - 0.7Mpa(can be operated at 0 PSI (Vacuum)) Package included: 1 x 1/4inch DC 12V Electric Solenoid Air Valve Review: Great value and built well - Worked great, well built, Iโm ordering more. Review: Perfect smart compressor air drain! - Installed at the end of an extended drain hose. It definitely is directional. At 30psi, it didn't seem to matter but at 150psi it blew like a bad harmonica. Flipped it around and it's perfect. It will even close the drain at 150 psi! I wasn't expecting that honestly. There's a definite tiny 1-2 second delay using the 12v model but that's just fine. I mounted 2 receptacles each controlled by a smart switch. Plugged the compressor into one and a 12v 2a transformer tied to the solenoid into the other. Now I can turn on my compressor, use it, turn it off and drain it using my voice and not crawling into the back corner of the garage and reaching under the compressor. Love it! If I decide to leave my compressor on for a while, I can use the solenoid as a condensation drain. It doesn't drain super fast, about the same speed as the old petcock drain, maybe a little slower. I drilled a small hole through the exterior wall and vent it outside because the drain was louder than my ultra quiet compressor. Not anymore! I absolutely love it. I did program the switches as receptacles so they would not be included in blanket statements like "turn off all lights."
| ASIN | B074Z5SDG3 |
| Best Sellers Rank | #225,427 in Industrial & Scientific ( See Top 100 in Industrial & Scientific ) #365 in Solenoid Valves |
| Brand | Plum Garden |
| Brand Name | Plum Garden |
| Connector Type | Threaded |
| Customer Reviews | 4.4 out of 5 stars 816 Reviews |
| Exterior Finish | Aluminium |
| Inlet Connection Size | 0.25 Inches |
| Inlet Connection Type | Flange |
| Item Weight | 0.01 Ounces |
| Manufacturer | Plum Garden |
| Manufacturer Part Number | PL-220101 |
| Material | Aluminium |
| Material Type | Aluminium |
| Maximum Pressure | 7 Bars |
| Model Number | PL-220101 |
| Number of Items | 1 |
| Number of Packs | 1 |
| Number of Pieces | 1 |
| Number of Ports | 2 |
| Outlet Connection Size | 0.25 Inches |
| Outlet Connection Type | Flange |
| Size | small |
| Specification Met | UL |
| Thread Size | 1/4 inch NPT |
| Thread Type | NPT |
| UPC | 611677715496 |
| Unit Count | 1.0 Count |
| Valve Type | solenoid valve |
K**N
Great value and built well
Worked great, well built, Iโm ordering more.
K**O
Perfect smart compressor air drain!
Installed at the end of an extended drain hose. It definitely is directional. At 30psi, it didn't seem to matter but at 150psi it blew like a bad harmonica. Flipped it around and it's perfect. It will even close the drain at 150 psi! I wasn't expecting that honestly. There's a definite tiny 1-2 second delay using the 12v model but that's just fine. I mounted 2 receptacles each controlled by a smart switch. Plugged the compressor into one and a 12v 2a transformer tied to the solenoid into the other. Now I can turn on my compressor, use it, turn it off and drain it using my voice and not crawling into the back corner of the garage and reaching under the compressor. Love it! If I decide to leave my compressor on for a while, I can use the solenoid as a condensation drain. It doesn't drain super fast, about the same speed as the old petcock drain, maybe a little slower. I drilled a small hole through the exterior wall and vent it outside because the drain was louder than my ultra quiet compressor. Not anymore! I absolutely love it. I did program the switches as receptacles so they would not be included in blanket statements like "turn off all lights."
F**Z
Works fine for low flow rate
1/4 refers to the threaded fitting. However, the port inside is much smaller, less than 1/8". This causes a pressure differential across the valve which increases with flow rate, decreasing the pump efficiency. This also limits flow rate to around 3cfm air. Maybe that's fine depending on the use, but 1/4" tube has much greater potential.
K**G
Affordable and works
Used as a pressure bleedoff for my 5gal pressure tank on my truck. Saw this was 12v, and figured I had to try. This bad boy is fantastic! It opens and closes at 150psi with no issue. Iโm writing this review 6 months post-purchase and donโt have a single complaint.
R**R
My air ride.
They work well.
Trustpilot
2 days ago
2 weeks ago