UL Listed 3 Position Rotary Switch 19mm 3/4" Blue LED Light 12V 24VDC/AC, Latching Selection Switch 5Amp DPDT 2NO 2NC 8Pin On Off On UL Certification

Two wires power the LED, not associated with any switch, it needs 12VDC. This is a DPDT switch. There are 3 positions, center, turn to LEFT, and turn to RIGHT. In the center, each common in connected to its NC. When you turn the switch to the left(it stays, NOT momentary), the the left common is connected to the NO, and the right common stays connected to its NC. When you turn the switch to the right(it stays, NOT momentary), the right common is connected to its NO, and the LEFT's common to its NC. The switch is perfect. Not all the switches have all the options-- this switch has 8 wires, 2 for leds and three for each independent SPDT switch(2 spdt switches make a dpdt of course).

Good quality

Using this as the control switch for two separate light circuits for fog and driving lamps.

You need to look at the switch’s back labels to see the correct connections. - negative 12v led + positive 12v led C common NO normally open but closed when the switch is pointed to that set of connections NC normally closed but only opens when the switch is pointed to that set of connections NC does NOT open except with the switch pointing to that side. The LED turns on at 2.35V and is semi-dimmable up to 24V. 2ma draw on the LED @ 24V

I wanted to use this to select cameras in my car; a simple SPDT rotary switch to active to select one of two cameras with the center off. I also wanted the LED to light up as I switched between cameras. It took a bit of work on the test bench and two diodes to get it done. But Im happy with the results. I used diodes ordered from Amazon https://www.amazon.com/dp/B07X7VJ7ZC?psc=1&ref=ppx_yo2ov_dt_b_product_details I used 3:1 shrink wrap to keep it all neat and avoid shorting.

My review will basically be a summary in agreement with everything I've seen in the other reviews: 1. ohm it out. it's got a lot of capability and mine is doing exactly what I wanted, but the diagram and the operation is wild. 2. appearance is great, the backlight stands out. it is a small surface to grab 3. back end plug does not latch. it is stiff going on but comes off a little too easily. 4. this is a hobby grade switch 5. tactile feel is also hobby grade and does not inspire feelings of quality or longevity

Received fast and as shows

as listed