Yamalube Pea Fuel System Carbon Cleaner For All Petrol Engines | Remove Carbons And Keep Engine Clean And Safe, 50 Ml (90793Ad81000), 10W

Really this product is working, Engine became smooth after first use recommended for all old bikes used it in my RTR 200, 2017 model

Good quality product work very well. Smooth fell sound in engine, fuel injector clean

Good 👍

Used this in my 4-year-old FZ-S V3. Was facing low pickup and mileage dropped to 38 kmpl. Added 1 bottle to full tank as per manual. Results after 1 tank:* 1. *Smoother throttle response* - Bike feels lighter, especially in 2nd/3rd gear 2. *Mileage improved* - Back to 44-45 kmpl from 38 kmpl 3. *Reduced vibrations* - Engine feels less strained at 60+ kmph 4. *Easy to use* - Just pour in tank before filling petrol *Tip*: Run it on highway for 20-30km after adding for best results. Using every 3000km now. Genuine Yamaha product. Better than local additives. Worth ₹300 for the performance gain.

I thought it will clean my carbon instead it cleaned my wallet 🌝 It increased the ticking sound in my engine i don't know how and this happened

There's no doubt that this cleaner works. Let me describe my experience. Vehicle: 2018 Suzuki Access 125 BS4 (carburetted) Problem: Rough idle. Engine did not run well under low throttle - used to rev up and down but without moving forward. I had to apply more throttle to get the scooter running, which caused it to jerk and make pillion riders uneasy. Solution: I thought about getting the carburettor opened up and cleaned by my mechanic, but this carb has never been opened, so I was wary of affecting factory settings (carburetors are sensitive and finely tuned, especially BS4 ones) I have tried Liqui-Moly Fuel System Shooter (it was pretty good) and Motul Fuel System Clean Plus (really cheap but it didn't work well at all!) Thought I would try out the Yamaha PEA Fuel System Cleaner since it's reasonably priced. Method of opening the seal: This has flummoxed most of the people purchasing this product, as far as I can see from the reviews. It's very simple: there's an O-ring (gasket) below the hard plastic cap. It's soft and can be removed with something sharp, like a strong safety pin, or a toothpick. Once that gasket is removed, the cap comes loose and you can unscrew it like any PET bottle! How to use: 1. Use up nearly all of your fuel in the current tankful 2. Keep the bottle ready and go for refueling. Empty the bottle in the tank JUST BEFORE refueling. I did it at the petrol station. 3. Fill the tank. Yamaha says 1 bottle of cleaner works for up to 10L of petrol 4. Go for a long ride, at least 10km, and ideally 20km long. Be sure to ride full throttle for at least 3-5km! Effects: The hesitation on low throttle disappeared within 10km of adding this cleaner and going for a ride! It was exactly what I'd hoped for. My idling has become smooth, and so has the running of the scooter. There's literally no chance of placebo effect here because I had a very obvious problem which has now disappeared. If you have nothing clearly wrong with your vehicle, you might not see much difference (that is what happened when I used this with my other vehicle, a 2011 Yamaha Fazer BS3) Bottomline: If you aren't facing any issues, it may not make much difference, but I've resolved to use this once a tankful everytime I get an oil change done, just so the fuel system keeps clean. I would heartily recommend this to anyone, especially those with non-BS6 vehicles! Carbureted engines need clean fuel systems.

It makes some difference.

This product is gem made by yamaha. I used this on my Platina110,bullet elctra and avenger 220.. Our vehicle shows signs like vibration in side mirror when idling. Pickup limit. Low mileage.. If this sign shows. Then buy this product.. 50ml/5litr ... Petrol. After mixing with petrol go for a ride and push the bike speed in highways. Let the 5 ltr petrol burn completely. Use same process if its not solved in 1st time.. Best compatibility is carburetor vehicles.