Buy anything from 5,000+ international stores. One checkout price. No surprise fees. Join 2M+ shoppers on Desertcart.
Desertcart purchases this item on your behalf and handles shipping, customs, and support to Croatia.
🔋 Power your eBike upgrade with the ultimate Y-splitter extension—connect, extend, conquer!
The baluoqi 1T2 Y-Splitter Extension Wire features a waterproof 3-pin Julet connector and a 7-inch length, designed to extend throttle, brake, gear sensor, and lighting cables in electric bike conversion kits. Compatible with a wide range of 36V to 48V eBike motors (250W to 1000W), it offers reliable, weather-resistant connectivity backed by a 2-year warranty and strong user satisfaction.
| ASIN | B0B1LPF5B7 |
| Best Sellers Rank | #35,141 in Sports & Outdoors ( See Top 100 in Sports & Outdoors ) #15 in Bike Cables |
| Brand | baluoqi |
| Brand Name | baluoqi |
| Cable Type | eBike Cable |
| Color | 3 Pin Connector(2Femal to 1Male) |
| Compatible Devices | Brake, Gear Shift Sensor, Battery, Light |
| Compatible Phone Models | No Compatible Phone Models |
| Connector Gender | Male-to-Female |
| Connector Type | 3 Pin Connector |
| Customer Reviews | 4.5 out of 5 stars 384 Reviews |
| Indoor Outdoor Usage | Outdoor |
| Item Length | 7 Inches |
| Manufacturer | baluoqi |
| Maximum Voltage | 48 Volts (DC) |
| Model | Y-1T2 Wire 3pin short |
| Model Name | Y-1t2 Wire 3pin Short |
| Number of Pins | 3 |
| Other Special Features of the Product | Waterproof |
| Part Number | Y-1T2 Wire 3pin short |
| Recommended Uses For Product | Connecting and extending components in electric bicycle conversion kits |
| Special Feature | Waterproof |
| UPC | 787803855562 |
E**R
Works perfectly, quality wire but didn't help my project with ebikes light for turn signals.
Gotten this to split into the ebike signal&power wire for the rear light panel. Matched the ebike's head central controller connector perfectly, it is snug waterproof connection and even color coding is matching. Wanted to wire one of the split ends to front turn signal&voltage cables while the other end connects to rears. Never worked, even though I made sure and measured voltage that was going to the rear light panel and measured 12V which is also what the front sequential led signals take. There was flashing, always on right signal all the while rear ones worked normally, but in certain polarity exchange ebike head unit even threw some error code, E23 if I remember correctly. Perhaps I need specific electronic bridge or step up step down modules? Iiii dooont knoooow. But if you do please help what could do the trick as I'm desperately trying to get front turn signals working. Nice item regardless, and thankful there is supplier with this type of stuff. Rare yet cheap, thankfully quality is there as well.
N**S
Used to activate brake light on motorized bike.
I used this with 5 pin relay to activate brake light when brake lever applied on 4 stroke motorized bike. Worked as anticipated. 5 pin relay, yellow wire constant for running tail light, when relay triggered, blue wire to led flasher, then brake light on load. I used the red and yellow wires, one to ground, and other to trigger relay. Omit the black wire. This isn't the intended use for this wire, but it works perfectly. You will also need https://www.amazon.com/dp/B0CHJ7DTR7?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 and E-bike Hydraulic Brake Sensors Cable for Bafang BBS BBSHD Motor Power Cut Off US / not available on Amazon, I found mine on Ebay
D**E
Fits perfect to make a watertight seal
I spliced into my e-bike cable to supply power to a volt meter. No cables/ connections were damaged in the process. I also purchased a pig-tail to plug into the second connector on the Y-splice, which l hardwired to the voltage meter. All worked out great. It may be overkill, but I put heat shrink over my connectors since it rains a lot here. Cost seemed reasonable. It's nice to know the exact voltage rather than depending on the 5 bars of the panel.
N**D
Conveniently reasonably small size
I was actually looking for a three way splitter, to rewire my brake light so I’ll have one in the middle and one to the left and one to the right. I couldn’t find one, and by luck I saw this two-pack of two-way splitters. Just plug one into one of the arms of the other: 1 —-> 1,2,3. Yes, eventually I’d have thought of getting two single Y’s if they didn’t come as a two-pack. Still, only four stars because there’s no reason why splitters wouldn’t be made 1-->2, 1–>3, 1–>4, 1–>5,… What if I also wanted decorative lights to come on when I brake?
P**.
nice
worked like they should, nice and long
K**B
Quality
Exactly what it says. Perfect for what I needed as i wanted to add another headlight to my ebike
C**S
Lights up two lights
Virtually great the life splitter powers, the light bar in the elite headlight on my lectric xpedition 2.0
J**S
If you receive correct item, works perfectly.
1st delivery was wrong item (opposite gender of plugs). After correct item was received on later order, item worked perfectly.
H**R
Guter Ersatz
Dieses Y-Split Verlängerungskabel ist genau das, was ich für meinen E-Bike-Umbau gebraucht habe! Die Verarbeitung macht einen richtig hochwertigen Eindruck, die wasserdichten Stecker sitzen fest und sicher – perfekt für alle Wetterbedingungen. Die Signale für Licht, Bremse oder Getriebesensor werden zuverlässig übertragen, ohne Verzögerung oder Wackelkontakt. Die Installation war total unkompliziert: Einstecken, Kabel sauber verlegen – fertig! Besonders praktisch ist die Auswahl an Pin-Varianten, sodass man das Kabel genau passend zum eigenen System bestellen kann. Für alle, die ihr Ebike erweitern oder optimieren wollen, ist dieses Split-Kabel eine super Lösung. Top Qualität zum fairen Preis – klare Empfehlung! 🚴♀️🔌✨
S**Y
Always on time
Excellent product, fit's perfectly.. also work great.
G**I
bonne longueur
bien
T**N
👍
👍
B**S
Conforme à la description
L'article commandé est conforme à la description, ce qui m'a permis de réparer mon speed pedelec Riese Muller. Je recommande...
Trustpilot
1 week ago
1 month ago