Wallmaster Ceiling Bike Hanger, Bicycle Lift Hoist Pulley System for Garage | Overhead Bike Hanger with 50lb Capacity, Indoor Bicycle Hooks, 2 Pack

This is one of the best ways to store your bike if you’re out of space in the garage. If you’re capable of installing it yourself, you can hang your bike close to the ceiling of your garage, up and out of the way so it doesn’t get damaged and you can use the space in your garage you don’t normally utilize. Overall installation took me about 2-3 hours since I had to build a way for the mounts to screw into the ceiling of my garage because of the way the 2x4’s are placed due to the build of my house. Build quality is really nice. I’ve used this bike mount multiple times now and haven’t had any issues with it. My bike has never slipped down or moved once it’s set. This is a great way to keep your garage organized. Since you can mount each mount whatever distance apart you need to, this bike mount can accommodate any size bike whether mountain or road. I use it for my Trek Top Fuel 9.3, hooking the handlebar and the back of the saddle to lift the bike into the air. Great product.

Very pleased with the two sets of pulleys. Freed up a lot of floor space in the garage by suspending two adult bikes. Installation easy if you're handy, the pulleys seem to be well made. Easy to lift and lower the bikes. 12 year old grandson can do it. Photo attached...

Good Design. Simple intuitive instructions. Hoist up and down works effectively. Only complaint is that the screw lags are made of cheep metal. Torque it too hard and it's gonna snap. Need a pilot hole for sure.

I needed to reclaim some garage space so it was time to find a solution for the gravel and mtb bikes. I had a wall rack but that took up too much floor space with the tires sticking out. I decided on this product and am very happy with the result. The pulley system and brackets are well-designed and solid. The bikes lift up to the ceiling effortlessly, especially the full-suspension mtb which is heavier than road or gravel bikes. The locking mechanism securely keeps the bikes in place, and it’s very easy to bring one down. I wanted the two bikes to sit close to each but my garage ceiling joists are on 16” centers which was too wide. Plus the joists were going in the wrong direction. So I bought a 2’x4’ sheet of 3/4’ plywood and hung that into one of the joists using three lag bolts. Solid! Now I can mount the brackets wherever I needed them without the constraint of joist spacing. I painted the plywood to match the a garage ceiling before hanging it. I took all the measurements for bike placement and then screwed the four brackets into the plywood. The finished installation is very nice. The bikes are hung in opposite directions so the bars don’t hit, and they are close together to get a good fit in the area that I selected. Overall I’m very happy with my purchase.

This hanger setup was reasonably priced, so I wasn't sure how well it would work. My shop has a vaulted ceiling, so I had to mount a 2x4 to span the rafters and make wedges to level the board out. This allowed the rope to stay centered in the pulley wheels, and not ride off the edge of the pulley wheels. I also spaced the pulley brackets centered over were I will be lifting the bike. The set up has been working out very well and gets used often. Things to keep an eye on, are the pulley wheel shaft pins and rope for wear.

This is my review of Wallmaster’s Ceiling Mount Lift This is an excellent way to claim space in your garage or storage space, by lifting your bikes off the floor, and up to the ceiling. The system is made of black-coated stainless steel that will support a load of up to 100 pounds (45kg) and is relatively easy to install. In my personal experience, I had it up and working in about 30 minutes. The rubber-coated bike hooks attach to the handlebars and the back of the seat and is adjustable to almost any size or type of bike. The pully system distributes the weight of the bike, making it easy to lift even heavy bikes. I can lift my heavy mountain bike up to the ceiling with one hand. Having never used one of these lifts before, I was skeptical, but no longer. If your bikes are taking up too much room, my suggestion is just lift them up to ceiling… using this device.

I am blessed with 11’ ceilings in my garage. When it came to storing bikes for the winter, there was no way I was going to carry a bike up a ladder to hook into the old fashioned hooks your grandpa used to use. I found this clever gadget on Amazon! So, I followed other reviews and mounted the pulleys to a 2x4 and then mounted the 2x4 to the ceiling. As a guy who overdoes things, I anchored the 2x4 with lag screws. It was reasonable amount of time for assembly, and the directions were well-written. It is easy to use, made of quality parts, assembled easily and works for any size bikes. With my high ceilings, I can raise the bikes to the ceiling and walk under them without hitting my head. Great product and sold my neighbors on a few sets as well!

Inexpensive and easy to install. However, the pulley blocks are poor quality. One gets what one pays for. Recommend upgrading these with pulleys with bearings. Much less resistance when lifting with upgraded pulleys. The ceiling brackets should be spaced, on average, where your handlebars and the back of your bicycle saddles are. That's if you are using this for bicycles. Also very useful as a make-shift bicycle stand when working on the bicycle require one or both wheels off the ground.

Easy to install and did not take too much effort to hoist a 55 pound ebike. I like the automatic brake on the lifting cable that kicks in when you release the cable adjust your grip