213411 2700K Purevue Dimmable Led Puck Light, Soft White

Has lots of light output. Works great good price feel solid. Very functional. I already had the 12 V DC. Driver. Very nice.

The best diy lights super bright and easy to install very happy with this brand and quality

I bought 4 of the black 2700k puck lights and opted for a flush install. The way the flush mount works is there are 3 rigid metal clips that screw on the top of the unit to hold the light in place from the top of the cabinet. I cut the holes in my cabinet with a 2 1/8" inch hole saw and found that the metal flush mount clips were just too rigid to bend enough to allow the puck light to slide into the hole and to be installed from the inside of the cabinet. I thought maybe I could get it to go if I really pushed hard, punched it, or if I smacked it firmly with a rubber hammer, but I didn't because I figured the light would break or bend. But luckily I had access to the top of the cabinet so I slid the unit in with no clips at first and then screwed the clips from the top outside of the cabinet. That worked perfectly, nice and snug. If you can't get access to the top side of your cabinet to screw the clips in then I HIGHLY RECCOMEND YOU TEST FIT THE FLUSH MOUNT ON A SCRAP SURFACE BEFORE YOU DRILL YOUR CABINET just incase you can't get it to fit either. It would be a disaster to cut the 2 1/8" hole and then switch to the puck mount install method which would only need a very small hole to be drilled for the wire to slide through. As far as quality, not too bad! The flush mount looks really good in my glass door cabinets. At the lowest dimmer settings one of my units is very noticeably dimmer than the other 3 but then matches brightness once I get up to 20% or higher. Also, I'm powering these on the same power supply with an LED strip under the same cabinets. At the highest power settings the LED strip appears to over power the brightness of these puck lights but does balance better at mid power levels. Perhaps if you were pairing these with LED strips you should go with high intensity LED strips only if you need task lighting but then maybe stick with less intensity LED strips if you just need accent lighting, which is my setup. Looking forward to enjoying these!

We used these puck lights to replace our old halogen ones that are under our kitchen cabinets. They fit perfectly in the space that the old puck lights were in. They were easy to use. I like that they are dimmable. The company has great customer service. My husband called them 2 times to ask questions about installation and they were very helpful and patient. They look nice under my cabinets. And best of all they do not use as much electricity as the old halogen ones did.

I have used this same product for 8 years and it still function as new. Great lighting for my computer and desk area. Very small easy to hide and the lih=ght is fantastic.

Love these they replaced older halogen lights. Wiring the same. I just had to resplice them in with regular butt connectors

Solid high quality metal fixtures. A bit more expensive than the plastic ones, but I want something that will add value to the house for years without any failures and annoyance. They look nice when flush mounted..

These lights came refurbished (which is what I ordered - $11 and change versus a ridiculous $25 new per light) but despite the "inspected by Amazon" sticker and "like new" or "open box" description they didn't work and the wires were cut very short. Exactly half of my 14-piece order did not light up at all, most likely burned by whoever bought them first. I am returning them, and wonder if Amazon will try to resell them once again. I might buy the remaining lights I need new, if the price goes down because they work very well with a dimmer, which you may need because they are very bright. Otherwise they seem that they would be excellent if new.