Air Jack, 3 Ton/6600 LBS Triple Bag Air Jack Lifting Height 16Inch, Pneumatic Air Jack 6600LBS Capacity Extremely Fast Lifting Action (3 Ton)

floor jack not tall enough to change camper tire. This worked great..lifted camper w/o delay. NO assembly instructions. Mostly common sense. heavy bugger but about the same as floor jack'' Great for backyard mechanic.

Let me come out and say it. This is by far my favorite jack. Why? I hate, hate, hate jacking up a car. I guess it is the work involved when pumping up a hydraulic floor jack and crawling on the ground to spot the jack etc. My garage is a little cramped so I cannot use a long handled, commercial style floor jack. I use the shorter style, wheeled hydraulic floor jack which is what I believe most people are using also. These jacks always left me thinking there has to be a better way to do this. I looked into other types of powered jacks and the air bag style is the one that looked like it was beefy enough to last many years and was low enough to fit under most of my cars. This jack makes jacking up a car very easy and quick. I have had this jack for about five years and have had nothing break or fail. It makes a jacking up a car much less work, especially if you have to jack up the car several times in different places. Now let me tell you about some precautions that you have to do while using this jack. This jack is to be only used to pick the car up or down. It will pick the car up in seconds, so take another second to slide a jack stand or two under the car. No exceptions! If your not going to this, don't buy this jack. Don't use it to by itself to crawl under the car. Here's why I say this, when the jack is jacked up high, it does sway a slight amount. It is not excessive by any means but it is there. The air bag has some sort of telescoping cylinder inside that somewhat locks which helps with this. There are other style jacks that sway also so don't fret (bumper/scissor). Second issue is if you are laying under the car and move around, there is a possibility that you could accidently touch the down air valve with your body. The jack goes down a lot slower than it goes up which is a good thing in this case. Again, don't use the jack by itself. Last issue is when letting the vehicle down it can be a little jerky sometimes due to the telescoping mechanism mentioned earlier. Go slow when letting the jack down, which you should do any way. If you don't take shortcuts, this jack is for you. I won't go ever back to hydraulic.

Works very well, and does exactly what it should. The box was pretty beat up when it arrives, bit it was so well packaged the packaging didn't fail.

Works great for DIY shop

I now have 2, one with the handle and one without. They work great! My neighbor had a flat tire and used 1, I was going to give him my old pump style jack and he said I just ordered one like yours.

I was excited to get this jack. I was tired of using the hand jack. Literally finished putting the jack together and put it on the ground to test. Picked up the handle to move the jack and the handle broke away from the bracket on the jack at the weld points. Tried to return it to Amazon and replace with another but this item is not returnable. Amazon says you have to contact the company directly. Wrote the company, which is in China, and have not heard back on the replacement of the part. I haven't even had the opportunity to try the jack yet.

I've used this jack for almost a year now and am very happy. I've used it to lift either the front or rear end of a number of vehicles including a Camry, Corolla, Solara, Landcruiser, Transit 1500 van, and more. The unit is reliable but I do have one recommendation - remove the screws and apply Loctite or your favorite medium strength thread locker. The screws came loose and air started to slowly leak. About 4-6 months after applying blue medium strength Loctite, I've not had a problem since. As a reminder, always use properly rated jack stands with any jack, including this one.

Used this first time today. Oil change on two cars. Also bought low profile ramps so I can fit it under my 300C which hugs the road like a dust-buster. To lower as far as possible, simply purge pressure, press jack down by hand, then close release valve and it will hold itself down. I have a 20 gal. 150 PSI compressor. More than enough. Lift is VERY fast and yet very controllable. Top rubber pad is very good for protecting lift surface. Wish I had bought this long ago. I'll be using the heck out of it. Quality seems very good. It was necessary to replace the air inlet fitting with standard 1/4 inch adaptor. Instructions are in ENGRISH of course but anyone who will be using this jack will no doubt be able to noodle it out. Very simple and minor assembly. I was a bit disappointed that I received an allen wrench for the base assembly but not for the handle. No biggie. Get yerself one o these!