Ergotron HX Triple Monitor Bow Kit Fits up to 24" (2.7-13.8kg)

Yes, I was able to mount it on an Ergotron TX desk with some modifications. Before I attempted, I talked with their support desk (very helful), and they explained that it wasn't recommended as being too heavy and the desk might tip. While I was concerned with the weight, there was no way the desk would tip, so I proceeded with the installation, which included a HX arm. Modifications: -Drilled through the steel plate in the desk to accomodate the stud mount included with the HX arm -Replaced the wing nut with a standard hex nut -Used a dremmel tool to cut the 6" stud in order to clear the desk's hardware when lowering Result: -The desk is significantly heavier with 3 23" monitor, however, I am able to raise it without too much effort -The desk is stable and I am able to articulate the arm without a problem Final comments: Quality, adjustability, and customer service are excellent. I had to spend a lot of time to figure out what arm was needed for this monitor system. It would be really handy if Ergotron suggested the correct related product on their website. While the installation went well, I am concerned that in the long term, the weight of the monitors on the arm will warp the TX desktop. I've put a tape dispenser under the 'handle' used articulate the system to support some of the weight and prevent some the bounce of the monitors when typing.

I have three 24inch monitors. This is the ONLY monitor arm that's capable of doing this (with all three monitors on one arm). In case you don't know yet, you need both the arm and this bow kit to get everything to work. Firs the good: - It's very robust and everything is well built. With three 24" monitors (each weights about 7 lbs), the arm handles them with ease. I can use the handle to move the monitors easily without much wobbling (make sure you desk is made of good quality solid wood). -Polished chrome is a personal taste, which not mine. But it's what was available to me. -Installation was easy, albeit the alignment/leveling of the three monitors which I will get to later. -Cable management is good. With the MST (multi-stream transport), I ran one mini DP from computer to one of the three monitors. Then use additional shorter mDP to daisy chain all three monitors together in series. So cable management from the computer, up the arm, to the monitors was easy. Even if you don't use MST, the cavity in the arm will have no problem handling all the cables. Now the bad: -Heavy, you must have solid test to handle the load. -Very expensive. I understand the need for this type of arm is probably a lot lower than the dual monitors setup, but there is got to be a more economical solution out there. With both arm and this bow kit, it totaled over $600 including tax. The WORST: I have no problem paying the premium to get a quality product or solution. But with the premium we are paying for this solution, I would expect the leveling of three monitors to be much better and more intuitive. If you look at the pictures I have attached, you can the two monitors to the side of the center monitor is considerably lower (about 1/8"). Trust me, I have tried everything to try to get everything leveled, nothing worked. If it weren't for the 4 plastic adhesive strips that they included, it would've been worst. VERY BUMMED OUT. Wish they can fix this. If you research a bit online, you can see that everyone has this problem. BUT, like I said in the title, I would still buy it again if nothing else is available. It's the only option available. Ergotron, if you are reading this, help us out!!!!

Fit & finish seems to be nice, however there is a glaring omission that can cause one's OCD tendencies to kick in: there is no individual height adjustment for each monitor. There is a slight height mismatch between my identical monitors, due to the outer beams having a slight downward angle in relation to the center beam. I've purchased triple-monitor desk arms in the past that have this, so to me this not a flattering look for Ergotron. I've been happy with various other big-ticket ergotron products, but this is the first that has disappointed me a bit. Ergotron support basically told me that most people don't care about this, so deal with it. I'm looking into getting vesa-to-vesa lift adapters to correct this problem. If I do end up doing this, I will amend this review to reflect my experience.

This triple monitor bow allows the monitors to go up, down in or out as needed. Extremely well built and fully adjustable. I have three 24" monitors perfectly and ergonomically adjusted for sitting or standing.

This is super expensive compared to competitors, and still, there are many issues. There are issues with monitors not aligning. There is a noticeable lean on the last monitor, furthest from the mount that clamps to the desk. There is a significant wobble of the monitors from side to side. Not worth the price. IMO

Per utilizzare questa staffa è necessario un braccio di tipo Ergotron HX che ad oggi (Febbraio 2023) costa intorno ai 300€, quindi questo più il braccio per poter tenere su 3 monitor. L'attacco dal braccio alla staffa sembra essere proprietario di Ergotron quindi non vi è nulla di compatibile. Io ho trovato la staffa usata a poco piu di 170€, con il braccio HX a 280 per un totale di 450€!!! Il costo di un monitor in pratica. C'è da dire che è molto difficile trovare qualcosa di simile in giro se non adattarsi ad utilizzare due bracci separati (uno doppio e uno singolo). Ci sono altre alternative valide come il PUTORSEN® Triplo Braccio per Monitor PC ma leggete la mia recensione anche su quel braccio perché ha delle limitazioni per la posizione in orizzontale dei monitor.

Ergotron Are a really good company, don't get me wrong, And this review isn't about them. I need to let everyone know that the pictures that show a complete system that allow you to mount your monitor Are not correct. The £295 hx triple monitor kit, does not include any way of mounting - So you cannot attach it to the wall or to your desk. The pictures all show a system with three monitors with an arm that goes down to the desk - this is simply not what you receive. The arm is a further £200 so please please don't let this supplier take your money under false pretenses.

Schneller Versand! Tolle Halterung!

アームがない。 対応が最悪。

Nach einigen Stunden des Zusammenbaus (inkl. Versuche das Konstrukt gerade zu bekommen) gebe ich nun auf - und ich WÜNSCHE mir, ich hätte die Frage von wegen Höhenverstellbarkeit gelesen. Das ganze sieht wirklich toll aus, ist sehr wertig verarbeitet und man hat das Gefühl man hat das Geld, ca €500, gut investiert. Nicht ganz. Denn wer hätte schon im Vorhinein daran gedacht, dass man die Höhenverstellbarkeit einzelnen Monitore benötigt, wenn man mit dem Stand bereits 3 gleiche Monitore mit-gekauft habe. Nun kann ich mich der Antwort von "Ein Ritter" am 9. Mai 2018 nun anschließen. Bei mir hängen die äußeren Monitore genauso zw. 5 und 10mm, je nach Schwenkung und Neigung. Das ist bei dem Preis, für mich, absolut inakzeptabel. Ein Produkt, inkl. Arm für rund €500.- darf solche Macken nicht haben. Das wäre ganz leicht mit der einzelnen Höhenverstellbarkeit der einzelnen Bildschirme zu lösen - geht aber auf gar keine Weise. Ein weiteres Problem auch: auf den Videos von Ergotron sieht man wie der Mann mit einer Hand die Bildschirme bewegt. Sind wahrscheinlich so 500g/Stk Attrappen. Soll man gerne bei mir probieren. Die Bildschirme wiegen 4,6kg/Stk. (Max.-Angabe), jedoch kann man das ganze gerade mal mit zwei Händen und viel Muskeln bewegen. Mit Schrauben-Einstellungen habe ich schon massivst gespielt. Dass das ganze nicht leicht ist, ist mir klar - aber solche falschen Werbungen zu machen finde ich kontraproduktiv. Trotz des optischen Gefallens, geht von Ergotron alles retour, denn ich kann keine €500 ausgeben, und dann mich immer wieder ärgern, dass die Monitore nicht gerade sind.