Lamicall Magnetic Phone Ring Holder for MagSafe, [Flexible 360° Rotation] Magnet Finger Ring Grip Stand Holder, Fit for iPhone 16 15 14 13 12, Pro, Pro Max, Plus, Mag Safe Accessories, Misty Black

Almost a year later, it still works like it did on day 1. It’s not loose in any way. And I use the ring to carry my phone and pretty much swing it around on a daily basis. The ring is still very stiff (in a good way). Very happy and would buy it again (but haven’t had the need to!). The magnet is strong. I didn’t have to use the included magnet backing. It has never fallen off. It requires a lot of force to make it come off.

This is my first time using a phone ring holder or pop socket like device, ever. I prefer to keep the back of my phone clear so I can use the MagSafe features of my phone whenever possible. I recently got an iPhone 15 Pro Max after having a smaller phone for the past 5 years or so (iPhone X, XS, 12Pro, 13Pro), so this is my first "large" phone in a while. I was concerned that even with my relatively large hands, that one handed use might be difficult in some situations. While I'm still getting used to that, I will say that the magnets on this ring holder are extremely strong. I can swing around the phone, flip it to the back of my hand, and basically treat it like it's physically part of the phone case, and it doesn't budge AT ALL. It does require a decent bit of effort to pull away from my MagSafe case, which is a good thing. It should also be noted that this will work only with a MagSafe capable case or a bare iPhone with MagSafe functionality. It will NOT WORK with your phone or case unless it also has a similar ring of magnets in it. The ring pulls up from the center of the magnets for you to slide your finger in, as well as rotates 360 degrees for your most comfortable position, and is pretty comfortable for my uses. I don't tend to keep my phone in my hands for more than 20-30 minutes at a time, so YMMV. A side benefit is that this ring also keeps it's position to where you pull it to, so it doubles as a phone stand with ease. All in all, I'm surprisingly pleased with it and will be using it frequently when I'm out!

The quality and build of this magnet is great. It works as intended and is very comfortable. The only flaw that I really have with it is that it is somewhat difficult to get the ring to pop out unless you are looking at it. There really isn't much of an indention to get finger nail under it. Very sturdy and holds perfectly to the phone, comes off easy enough when you need to remove it. When using it to prop up phone for watching anything, the stand part holds up very well and offers many angles. I like to fidget with it and spin my phone around my finger and have no issues. Would definitely buy again.

I've been using the Anker one for 4 years. I keep rebuying them because they never last more than 11-12 months. The ring gets pitted, or breaks off entirely. The tension on the ring stops being tight within a week or so. I decided to try this one this time around. It doesn't wreck your case - the ring rotates on a bearing, whereas the Anker one physically rotates entirely, scraping a circular hole in your case. So that's a Pro. I had to get used to the ring freely rotating, but I like it now that I'm used to it. The ring feels very tight so I'm hoping it stays that way for more than 2 weeks. If so, another Pro. The ring has a little cutaway section designed to be able to grab it more easily with your thumbnail. Nice idea, but it creates a sharp spot to rub on the back of my finger when using the ring at some angles. Kind of a Con - it wouldn't NEED it, but doesn't bother me enough to not like the product. The magnet is excellent. Stronger than Anker - which is also a pretty good magnet already. But there's been times where I've gripped my phone tripping on a curb and the magnet detached, sending my phone flying onto the ground. This feels like it won't detach as readily. Pro. It works very well as a kickstand to watch TV on my phone positioned on my desk. That feature largely depends on the tension of the ring not loosening over time. But as of this moment I'd say it works great. Pro. I'll update this if anything goes wrong with it. If I get the same 11-12 months out of it as I get from the Anker one, then I'd probably still pick this one overall.

It is very difficult to get the ring out to use. The swivel around the circle is very loose, no traction, which might be preferred or not. I prefer a little friction so that it stays where I put it. This is NOT 2-way magnetic, unlike the Andobil one I ordered. So if you want to be able to use your ring to attach your phone to metal surfaces, go with the Andobil. The ring is not entirely smooth, it has a weird divot on the inside at the top. This may or may not bother the finger in time. I won't find out because I'm sending it back. The hold is so-so. It holds on if you're just holding the phone, but any amount of force and it'll pop off immediately. The Andobil holds on much stronger. Pros: - ring is rounded, not squared off like many phone rings - attaches easily and without adhesive. - multipurpose, use as a phone stand as well as a finger ring. - comes in many attractive colors - lower price point than many others. Cons: - not 2-way magnetic, can't attach phone to fridge for example. - very hard to get ring to swivel out from the flat position. It hurts my fingers. - it only opens to a little past 90 degrees. It won't open enough to be totally snug against your finger. - circular swivel gives zero resistance, it will not stay where you put it. This might be either a pro or a con, for me it's a con. - there's a weird gap between the ring and the outer part. It isn't enough to fit a finger in to help with rotating it out, and it looks weird. The cons outweigh the pros for me, I'll be returning this.

This attaches really well to the back of my magsafe phone case. The metal ring stand is sturdy and holds up well, allowing you to prop the case up when you want to watch things on your phone. The ring does slip around pretty loosely, which took some getting used to. But, the benefit is that the ring is less likely to rub your fingers raw when you are holding it for a long period of time (an issue I had with a previous ring style I owned that was more firm). The only negative, and it's a minor one, is that unless your finger nails have grown out a bit, it's a little difficult to pull the ring out and away from its flat position. Still, I think this was a great buy.

Seller needs to rethink the design and capability of using this product on any phone. I see the idea of it being slim and ring based for holding and also setting a phone up instead of it having to lay flat. This is where the major issue is which causes problem for using the product everyday, multiple times a day. 1. The ring embedded in the metal shroud is practically impossible to fold out and use for any of its purpose. The inner ring is so stiff that I cannot fold it open. It's impossible to get a finger let alone a finger nail to pry open the inner ring for use. The purpose for stiffness is to sufficiently carry the weight of the phone for standing the phone rather than laying it flat, better idea would be to have a post-opening locking gear mechanism between the outer shroud and inner ring to lock the ring in place, allowing the ring to open and close more smoothly. I have tried loosening the inner ring rod and it's pretty solid. 2. This is not the sellers fault but in general, mag cases and any magnatizabale attachment that you end up using with your smart phone interferes with the features and capabilites of your phone including use of the s-pen and any third party device such as a swipe pay terminal or close contact data reader will prohibit the use of the feature. The interference with the 2 joining magnetics disrupts the transmission of data from phone to terminal. It's now being used as a paper weight... Gave it 1 star due to poor quality, inability of using the product for its defined product description.

So I have an Otterbox case and I’ve Always used a pop socket, but I Wanted some thing that I could use that is compatible with my MagSafe charger, but I needed the functionality of a stand so when I use my phone for workout videos or to watch Netflix or whatever. So I randomly found this on Amazon, and bought it on a whim. And it totally works great. I use my phone to work out every morning and I’m able to prop up the phone with no problem and watch the out. I use it like I did with a pop socket to hold the phone. I will say that the little ring that you have to pop out to prop up your phone can sometimes be hard to grab. But it really works great. The only thing that was really weird was that it doesn’t actually adhesive to my phone. It’s more like a magnet. And I pop it off every night to charge my Phone. I’m not sure if that makes sense. But I thought it was going to like permanently stick on my phone. But it doesn’t. So that’s the only thing? Maybe I didn’t do it right. But whatever the case, it’s working for what I need to.

Bon produits

Innanzitutto chiarisco che ho comprato questo anello non per usarlo come impugnatura per portare in giro lo smartphone, ma unicamente come sostegno. Questo perchè io viaggio molto il treno e molti supporti da tavolo che ho provato sono risultati instabili o troppo ingombranti per stare in borsa. SUPPORTO DA TAVOLO Il mio utilizzo principale non é con l'anello sempre fissato sul telefono; lo estraggo dallo zaino quando mi serve. Così facendo posso prima fare uscire l'anello e poi lo fisso al telefono senza problemi. ANELLO SEMPRE AGGANCIATO Se invece volete usarlo sempre attaccato al telefono allora vi dico subito che per aprire l'anello servono le unghie, almeno un po'. Dopo averle appena tagliate ho trovato noioso e complicato estrarre l'anello, al punto tale da doverlo sganciare, estrarre, riagganciare. Questo nonostante sull'anello ci sia una piccola rientranza per agganciarsi con le unghie (sì ma se lo ho appena tagliate e non sporgono...). MAGNETE Il magnete é abbastanza forte ma non troppo, sul mio iPhone dal 13 regge bene, ma solo se lo uso senza cover o con una cover magsafe. Con la cover sottile (SLIM 1mm) funziona bene come supporto, ma non si attacca così tanto da poter sollevare lo smartphone tranquillamente, il rischio che cada e si stacchi é alto. MATERIALI L'anello interno non é molto spesso e sembra sottile, tuttavia l'ho stressato abbastanza e non ha dato nessun cenno di cedimento. La parte dell'anello esterno a contatto con lo smartphone ha una leggera gommatura, quindi non credo possa graffiarlo. Dal punto di vista dell'estetica, delle finiture e della qualità dei materiali sembra veramente tanta, tanta roba. ANELLO X COVER NON MAGSAFE In confezione (ed é una cosa che ho gradito molto) c'è un anello per rendere compatibili le cover con il magsafe. Se la cover é perfettamente liscia il procedimento é molto semplice: ho attacchi l'anello al supporto, levi la protezione della colla e con un colpo secco e diretto lo attacchi (e poi lo lasci almeno un'ora per far seccare la colla) o usi i template che trovi in confezione, che ti dicono esattamente come posizionare l'anello (ci sono le istruzioni, é semplicissimo e non puoi sbagliare c'è tanto di stampino su carta). ANELLO ADESIVO TRASPARENTE Se invece la cover é ruvida, di stoffa o porosa in qualche modo bisogna prima attaccare sulla cover l'anello trasparente in plastica che c'è in confezione, che si attacca molto saldamente alla cover e crea una superficie di contatto liscia su cui poi applicare l'anello in metallo. NEL QUOTIDIANO Per quanto riguarda l'utilizzo dell'anello sulla mia cover ha lasciato il segno rotondo dei magneti, cosa che non mi fa impazzire, ma che viene via semplicemente passando una pezzetta umida sulla cover. In generale direi che va tutto bene, il prodotto risponde perfettamente alla descrizione, l'unica osservazione riguarda la cavità per le unghie che é troppo piccola, avrebbero dovuto chiudere il cerchio in alto con una linea retta e guadagnare più spazio infilare le dita, o fare l'anello un po' più largo... CONSIGLIATO A parte questo é fatto dell'anello difficile da estrarre senza unghie direi bene, esteticamente e al tatto i materiali sembrano buoni quindi direi che ha un buon rapporto qualità/prezzo, soprattutto se c'è qualche offerta consiglio di prenderlo. Spero di essere stato utile, buoni acquisti

Well priced, good quality and does the job.

التصاقه قوي ويعتمد عليه

This thing is awesome. It has a nice weight, feels durable and just *snaps* to my Pixel 10. I thought the magnet wouldn't be strong enough for me to feel safe using it, but the Lamicall ring literally LEAPED to the back of my phone. Removing it takes effort. The inner ring rotates, so you can have a solid grip on your phone if you tab between work texts and gaming (as I often do). The design is smooth and sleek. It lays flat against my case and doesn't impede me when I'm taking my phone out of my pocket. If I *had* to complain about one thing, it's that it can be a little difficult to pry the ring outward to use it. I have large hands so getting one of my fingers underneath the ridge can take me a few tries. That might just be because of my goblin hands, though. I felt compelled to write a review. I feel like an orphan that became joyful after buying a magic tonic from a street salesman that actually works. The Lamicall ring is great. Easily the best 20 bucks I've spent on quality of life items in a long time! It actually makes me angry how good it is.