6 Ton Jack Stands

The Pro-Lift Heavy Duty 6 Ton Jack Stands (model T-6906D) are designed to offer exceptional safety and support during vehicle maintenance. Constructed with sturdy stamped steel and a high-quality cast ductile iron ratchet bar, these stands ensure durability and longevity, making them ideal for both professional and DIY auto repair tasks. The dual locking system, which includes both a handle lock and mobility pin, provides an extra layer of security while working beneath your vehicle. ### Key Highlights: - **6-ton Capacity**: These stands can support up to 12,000 lbs, making them suitable for various vehicles, including small cars, SUVs, and light trucks. - **Dual Locking Pins**: The combination of a handle lock and a mobility pin adds extra safety, ensuring the stands remain stable under heavy loads. - **Wide Saddle Area**: A large saddle surface area enhances contact with the load, improving stability and reducing the risk of slippage. - **Adjustable Height**: The height range of 16-5/8 inches to 23-3/8 inches allows flexibility for different repair tasks, accommodating both low and high vehicles. - **Durable Design**: Built with high-strength materials, these stands meet or exceed ANSI/PALD standards, ensuring reliable performance and safety. Overall, the Pro-Lift 6 Ton Jack Stands offer a robust and secure solution for anyone looking to perform maintenance work on heavier vehicles, with a focus on safety and ease of use.

I take safety seriously, and when it came to finding the perfect jack stand, I had a checklist of criteria that I couldn't compromise on. First and foremost, I needed a jack stand with a double locking mechanism. This was non-negotiable for me because I had heard about the unfortunate incidents involving Harbor Freight jack stand failures. Safety had to be the top priority, and a double locking mechanism provided that extra layer of security and peace of mind. Another crucial factor on my list was the quality of welds on the base of the jack stand. Inadequate welding can lead to structural weaknesses and compromise safety. I didn't want to take any chances, so I looked for jack stands with high-quality welds. This ensured that the stand would be sturdy and dependable, capable of withstanding the weight of my lifted large SUVs and trucks without any concerns. Speaking of lifting large vehicles, the third criterion was the height of the jack stands. Given the size of my vehicles, I needed jack stands that could provide ample clearance. These jack stands fit the bill perfectly by offering the necessary height to work comfortably and safely under my vehicles. I couldn't be happier with my choice of jack stands. They met all my safety requirements with a double locking mechanism, excellent weld quality, and the right height for my needs. These jack stands have given me the confidence to work on my vehicles without any worries, and that's priceless when it comes to ensuring the safety of both myself and my prized vehicles.

I have a set of 4 harbor freight 3 ton jack stands that I've been using for several years without issue; however, in the back of my mind, I always questioned why there was not a security pin included. I've been doing more work on my cars lately, so I finally broke down and bought 4 of the Pro-LifT jack stands. I've included some picture as part of my review (Note: I am just a pleased customer and paid full price for these jack stands). First off, these stands are very sturdy and well made. Without extending the jack stand arm, you will get a base height of roughly 15" and just a little over 23" if you extend it all the way up. I feel much better under the car when using these jack stands with the security pin in place. As you can see from the picture, the security pin engages the arm tooth fully in addition to the ratcheting arm, which is usually the only thing most jack stands have, so there really is no chance of the arm slipping out from the locked position with this double protection. The welds on the stands as well as the fit and finish were very good. The only flaw I could see was on one corner of one of the feet, there were some bubbles in the weld bead. It was still welded very well, so this small defect did not bother me in the least. The jack stands are even when placed on a level surface and have no wobble whatsoever. Overall I'm happy with these stands and I would recommend them. I hope this review is Helpful to someone!

I have zero issue crawling under my f250 while it is being supported with these jack stands. They are the strongest feeling jack stands I've owned or seen in person and I'm a technician who has seen an used alot of different jacks and jack stands in my life. These double locking and very high lifting heavy duty stands are the safety I was looking for. They will likely not work for cars or anything lowered without some creativity and a 3ton floor jack with decent lift height. The minimum height is very tall. 6 tons is also 12,000lbs and my vehicle gross weight rating is 8,800lbs. Plenty of head room even if my vehicle was fully loaded to max weight. If you have a larger vehicle truck or SUV these are likely what you will require to be able to get the car high enough to remove the wheels. And a floor jack at least 3tons but I'd recommend 4tons or higher rating if you can store and pick up a floor jack that size. A 3 ton floor jack is alot heavier than it looks if you have to pick it up for any reason.

Lo devolví, pues las dimensiones no son adecuadas para mí auto, no fue error del producto, yo no revise de manera correcta, pero visualmente parecía satisfactorio.

These were the first jack stands I ever got, I purchased 4 so I could lift up my E90 and do some work on it. I have done countless things with these jack stands since then including lots of extensive work on my Chevy Blazer, the stands are currently holding my Dana 60 axle I'm preparing to swap into the blazer. I never have an ounce of worry when going under a vehicle with these jack stands holding it up, they are very sturdy, additionally, they have a lock so in case something does go wrong, they still won't drop the load. I see these jack stands lasting for the foreseeable future as even with 5 years of hard outdoor use, they aren't showing signs of wear or rusting. (disclaimer: they are stored in a garage when not in use)

qualitet

La caja viene con exceso de precinto, al abrirla y sacar el producto, se aprecia uso y desgaste.

I use four of these (two sets) as backup to my QuickJack lift and have never felt safer under a raised car. The stands go high, have a nice wide base, and use locking pins (which should be mandatory on all jack stands, if you ask me). They're very heavy duty and are likely rated rather conservatively. They're probably completely unnecessary with the QuickJacks, but they give good piece of mind. I wouldn't hesitate to use these as my main supports.