Dual USB Motorcycle Charger for Honda CRF300L CRF250L

Although this was the least expensive of the bunch that were listed on Amazon, it ended up being pretty decent. This one is an automotive accessory socket (cigarette lighter socket) with a USB charging adapter plugged into it. While some reviews complained about this, I actually find it to be a benefit. The included USB adapter is very low profile and fits under the weather protective rubber cap. And by being a standard automotive accessory socket, I can always change out the USB adapter to something bigger, better, or different should I ever want to, and it gives me the option to use the accessory socket for other things such as an air pump for that air mattress when off-road camping! The included USB adapter puts out plenty of power to keep my cell phone charged while using it for navigation. The only "issue" I ran into was plugging the connector into the OEM wiring harness of the bike. Upon inspection of the male pins inside of the connector, I found them to be just slightly bent or misaligned. The pins are small and soft enough that I was able to very easily straighten them with needle nose pliers. After that, the connector mated perfectly. I installed this on a 2021 Honda CRF300L. I'd definitely buy this one again.

Purchased this USB adapter for my Honda XR150L (2024). The price is great compared to the Honda OEM USB adapter($99) but still works with the provided Honda accessory port that you can find behind the headlight. Using that port allows, you to control the USB port with the ignition key. I paired mine with a Tusk accessory dash plate, which required a bit of gorilla tape to fit that accessory snuggly but allows the USB port to mount in a convenient out of way location. The fact that the USB adapter can be removed, allows you to use the 12 V port for other accessories. Super easy installation and so far has held up good in initial rides.

Works properly. I checked the voltage before plugging in my phone. It was spot on. The wires are much longer than needed but there is room to wind them up behind the headlight. Finding a place to mount it was a trick. I used the gap in the upper fork clamp. Had to enlarge the holes in the mounting strap and remove a bit of metal from the tips for it to fit. The thickness of the mounting strap ends is less than the gap in the triple clamp.

Inexpensive. The rubber cap seems a little loose & sloppy. Not sure how long cap will last or how well it will seal out moisture. But it was cheap, easy to install, plugged right into the Honda accessory plug, and seems to be working good. Just installed it today so I can’t comment on durability. Time will tell.

Easy to install. Just a bit of fiddling wrapping the extra wire behind the headlight, and it was good to go. Works just like it is supposed to.

Installed easy thanks to the specific plug and play . But the mount bracket left a lot to be desired. The plug end itself is a normal 12v cigarette style charger so you can swap it out for anything else that fits that type which is nice not being locked into a type c and type a usb only. The mounting bracket is a thin piece of sheet steel with a rubber pad around it. It doesn't really fit tightly so the charger can move and slide . I ended up straightening the whole clamp out and bending it around myself to fit where I needed it. And I had to drill the holes bigger to fit the bolt where I wanted to mount it at. All in all its solid as the charger and adapter works and charging my phone. The waterproof cover works nicely but also can fall off if your not paying attention. It's not secured to the charger it's just ontop of it.

plug and play on my Honda CRF 300 rally, even mounted on OEM site nice

Tips - it’s a bit difficult to unplug the “factory CRF250/300L protector plug. I found it easier to take off the “head light”….to get at the plug….and it was 10x easier to reinstall the headlight….with the front fender removed. If I ever need to work in that area again…..I’d take the fender off….then the headlight. This way you can professionally route the cable etc….. It’s a must have accessory to have! Great product!

Passt super für die Honda. Das Innenteil ist für Standard 12V "Zigarettenanzünder" und lässt sich in Zukunft auch für andere Ladestecker weiter verwenden.

Kabel, Stecker soweit okay. Etwas entäuscht drüber, dass der dargestellte USB Kontakt, nur in die Steckdose gesteckt, ist