TruXedo TruXport Soft Roll Up Truck Bed Tonneau Cover | 272201 | Fits 2014 - 2018, 2019 Limited/Legacy Chevy/GMC Silverado/Sierra 1500, 2015-19 2500/3500HD 8' 2" Bed (97.8")

This cover was very easy to install. It required no drilling and only a 1/2" wrench and a tape measure. I bought this is a "used but like new" item on Amazon and the only thing missing were the installation instruction. I am pretty handy and was able to install the cover without having to look them up online. They are available on the companies web site though. Anyone with even the most basic mechanical ability should have no trouble at all installing this themselves. The only concern I have at all is that the Velcro on the sides will not last forever. The way Velcro works is that one side is a hook and the mating side a loop. Every time you pull it apart some of the loops are damaged and there are fewer and fewer loops to catch the hook. After a while the Velcro no longer works. Seeing as the loop side is sewn to the cover there is no way to replace it. Other than the possible future Velcro issue it fits perfectly and looks great. It is also very easy to use. There are two latches at the back that you release to allow the cover the be rolled up. These operate very easily. And rolling it up is also done very easily while standing on the side of the truck. It is made to be either fully closed or fully rolled up when the vehicle is moving. I had a truck the dealership lent me that had a "tri fold" style cover. I personally like this roll up style better. The tri fold has the advantage of being able to be unfolded and folded more quickly than this one can be rolled up. The advantage to this roll up style though is that it takes up almost no room when it is completely rolled up. Also, that folding style had a latching system that was much more difficult to use than this cover. The last thing I will mention is that this is supposed the be a more economical cover than others out there. I can say that, at least on initial installation, it certainly doesn't look or feel cheap. It looks good, feels well made, and operates easily.

I bought this quickly before our road trip. My husband normally chooses things for our truck but we were in a pinch. I needed prime shipping to get us a bed cover in time. It was an easy install and it looks pretty sharp. Man am I glad we got it. We went to South Dakota and we had heavy rain the entire week. Like flood warnings and road closures. Everything stayed nice and dry. We also like how we can use this to lock the tail gate with our 2014 Silvarado. Since it is a soft cover, it most likely will allow water to pool over time, but we wanted the full use of the bed, which hard covers don't allow. It's good quality so far and saved our butts on this last trip. I especially like it for when we take the truck grocery shopping now. I'm very happy that when we need to move large items, we can just roll up the cover. Sometimes you have to adjust the velcro for a smooth fit but no big deal.

Replaced my aging roll up cover with this one fit perfectly and easy to install and adjust. The last one was a TruXedo Lo Pro and lasted 10 years so expecting great things out of this one. The picture shows why I had to replace the old one - it would only occasionally latch and would pop it going down the road. The fabric and other parts were still working perfectly, showing how durable these are. You pay a but more but it also lasts longer.

I had this brand of tonneau cover on my last truck and liked it enough to buy one for my new truck. P/N 272001 is for a 2014+ GM full sized truck with a 6.5ft bed (unsure if it will work on other years). Installation is very simple, there are two side rails that sit on top of the bed rails and the header-type rail that installs near the cab and the whole thing is held down with six aluminum clamps. My last cover was over six years old when I sold the truck and still looked brand new. The fit is good, but the tonneau rails are completely straight and don't follow the complex contours of the sheetmetal as well as I'd like (reason for the 4-stars). The tonneau cover also just barely catches the inside edge of the tailgate. I've seen other covers that fit within the bed for a nearly flush installation, which I think looks nicer, but those usually take up a bit of space inside the bed. This cover still allows you to get your fingers into the stake pocket (it's tight) to use the step feature on the bumper of the 2014+ trucks. I didn't time the installation but I think it took me about 30 minutes to install by myself at a leisurely pace. I can't comment yet on the weather tightness of this particular cover, but my last cover kept everything reasonably dry. At a car wash, a little bit of water would get in at the front of the bed and the sprayer would make about the last 6 inches of the bed wet near the tailgate. Based on the fit of the new cover, I expect it to perform similarly. The best feature of this cover is the ability to roll up quickly and easily. There are two locking tabs near the tailgate which releases the rail and allows it roll up out of the way. The end rail by the tailgate and cross-braces all roll-up as one assembly. I've never had a problem rolling and unrolling my last cover in freezing conditions. The locking tabs never froze up and the velcro that holds the sides never gave me problems during the winter either. I've had many different styles of soft tonneau covers over the years - the fixed snaps, sliding snaps, interlocking cover/rail, removable/adjustable cross rails and this one is the best style for my needs.

Bought this after taking a good look at the same brand installed of two different trucks by different manufacturers. I previously had a trifold which was great, but took up space when I needed to place tall items in the bed. This Truxedo and fits perfectly between the rear window and bed when rolled up. Unlike older and cheaper model roll ups, this has a clamp on rail system with built in Velcro style base. It’s a much better system as the Velcro is on an angle and the product is robust in design. The Truxedo also has built in support bars that roll up with the canvas, again a superior design as you don’t have to drill in holders or worry about losing the support rails. A final great feature is the tailgate rail. When you roll out the cover, the rail drops into a hinge area, press down the rail and it stretches the cover tight and latches itself into place. Opening the cover is simple, press down levers on both sides and the cover is ready to roll up. When you reach the cab, there are two simple hooks and loops. Very easy.

Easy to install and works great!

Easy to install! Took us about 20 minutes! The fit is great. We got 2 inches of rain while in SC and never had a leak. It rolls up easy and the hooks that hold it place are solid. DON’T over tighten the clamps that hold it to the box.

Seems to be of good quality. Price has gone up in recent years; but that applies to many products. Still a good value but when they were 60-70 dollars less they were an incredible value. Shipping was good...relatively quick and no damage etc. There are installation instructions. They are very straightforward and contain some helpful tips. Follow those and it goes very smoothly - not a difficult or time consuming thing at all. I would recommend yes.

Simple install. Instructions state "If you have a box liner you may not need the front seal"; check the difference in height between the side rail caps and front box liner cap, if there is a difference use the seal. I tried it without and leaked at the front. Product finish is nice. Ice and snow don't seem to be an issue for it. Looks good on the truck. About $300 cheaper than dealer (but doesn’t have GMC embossed on it). Velcro sides get a nice seal, a lot better then the days of lining up, pulling hard, and snapping it into the buttons. To do it over would buy again, it also arrived in two days and I live on Northern Ontario.

Cover arrived on time. Fits perfect. Easy to install. It's advertised to be installed 20 mins. Will take like an hour or more. Will take about 2 hours if you got to remove an old cover from your truck. The frame has bolt on clips which are better than the buckle/fold I had previously.

Easy to install, Work well

Easy to install and fits perfect. Took about 15 mins to install.

Works great installed alone in like 20-30 mins It’s pretty easy even if your not very mechanically inclines like myself it’s pretty self explanatory.... kind of wish they showed where the weather strip in the front is supposed to go like measurement wise but still worked out fine. As good quality as an oem cover... my friends ford cover is literally the same but different brand obviously