Eallc Microphone Broadcasting Stand type1

Ever since I moved to Scotland a bit over three years ago – leaving my old boom mic stand behind as it simply was too heavy, bulky and oddly shaped to suit any of my parcels, giving it away to my nephews who also dabble a bit in sound recording and music – my large diaphragm studio microphone has simply been left in a box with nothing to do. Recently, I had some recording needs that couldn’t be covered by my instrument mic, however, and so I finally decided to get a mic stand to attach to my desk, something I had long considered. This one was very cheap, yet from the pictures and reviews, it seemed sturdy enough that I chose to go for it, and I am glad I did. Even though the adapter that makes it fit my standard microphone attachment shock mount is made from plastic, making it the weakest spot of the whole design, my general impression is that this is a solid stand, with suitably tight joints to make it move where I want it to and stay there as long as needed. The relatively heavy weight of my Sontronics microphone and its shock mount seems to be all in a day’s work for this stand, and when not in use, I can simply push it out of the way at the back of my desk. I find it so much more practical than my old mic stand, though of course this one only makes sense if you do your recording work at a desk. So, for hobbyist home-recording instrumentalists, such as myself, who play sitting at a computer, or for those who do narration, voiceovers, broadcasts or podcasts, this is a very economically priced stand that might just suit your needs perfectly. As for the plastic adapter, I think it will hold up well. If it gives up some day, it shouldn’t be too hard to get a new one in metal, though it might cost the same as a new stand and I might just get another one instead. The Same one, of course, as I am quite happy with it and its excellent quality for the price.

Just set this stand up and first impressions are good... Pros: Build quality is reasonable for the price and it appears to hold a decent amount of weight. I'm using it with a rode NT1 vocal pack, which comes with quite a heavy mic cradle and it seems to have no trouble with it. Setting it up only took a couple of minutes as it came already assembled. I've not used the included mic clip that as my mic cradle replaces it so can't comment on that. Cons: My only complaint it is not as tall as I'd like it, I'd like each arm to be another 4 inches longer as I want to use my mic inverted and I can't get it in the position I ideally want. There isn't any instructions included, but you don't need any. There is a picture diagram on the side of the box, which is pretty self explanatory, although the labels are in Japanese/Chinese or something similar. Also When the arms are positions in the lowest possible position (i.e. the arms are 'closed' - all touching each other) the thumb screw to tighten it in position hits the springs, so you can't do it. But can't imagine a situation where you would want it in that position. Overall: For the money it appears to be good value and I'd buy one again. Tip: To keep everything neat, rather than wrapping a mic cable around the arm, which will invariably get pinched or tangled etc. I've zip tied mine to the back arm, leaving enough slack to allow for the full arm movement. It works well.

This is an excellent product thats very good value I have it attached to my shelve and it works a treat holds my studio mic in place where ever I need it. Its good for micing up guitars too and very easy adjustable in seconds with the clamp. It will fit any type of Mic but you might need a small adapter for certain mics which only cost a couple of pound anyway. I find this much better then using a floor stand it avoids vibration when recording which is very important when doing home studio stuff and takes up less space, its a first class product.

Product arrived nice and early this morning - 2 days early, which is always nice and a seeminly recurring theme with Amazon. After reading the other reviews about this product I remained sceptical as to the build quality of such a cheap product. Man, was I wrong. This suspension scissor arm (thingy, the title isn't all that clear - somewhat amusingly) so far seems to be of excellent quality. It's holding up my Samson C01U with relative ease and all the little knobs are easily adjustable and come nice and tight. Surprisingly, the boom does not even sag under the weight of my mic. So far, I'd thoroughly recommend this product, especially considering it's amazingly cheap price. One year on (roughly) and this suspension boom is still holding up my mic with no issues at all. Definitely a worthwhile investment for anyone on a budget! I shall endeavour to update this review in about a month to see if the product is still as strong after some use.

It does the job its meant to! Will work with most desks and the sizing will most likely be correct with most desks so it can reach your mouth easier. However the top part of the stand that holds the microphone tends to sag to one side meaning it leans against my monitor. At the bottom where it grips onto the desk, the foam that is glued on so threes no scratches to your desk rips off easily just as you attach it to the desk, you'll notice it when moving the stand to another place. And the clip to tighten the stand onto the desk clamp will scratch away the stand and won't hold it tight enough which is probably why it sags. It does its job and it isn't awful, may be a better option to dish out for a slightly more expensive stand?

My son bought this to use with a Shure microphone Shure PG48, PG48-XLR I use when I do a bit of (bad) karaoke. He has it screwed to a desk to put voice overs on videos he makes with his friends (including FIFA 15 games). It woldn't look out of place in a radio studio The microphone fitted perfectly in to the adaptor, if you felt the urge you could cable tie it along the length of the arm but we haven't done that. The springs keep the arm in place and are simple to move. There is also a screw near the base which can be loosed to allow sideways movement. Very impressed with this, I originally thought my son had said it cost him £30 which would have been about right in my mind. For it to have actually cost a tenner is absolutely amazing for the quality. Top purchase and highly recommended.

This is a very decent microphone scissor-arm stand for the very good price. I bought this stand to accompany my microphone for YouTube recordings and gameplay videos. It works perfectly. The metal build is very strong and sturdy. This stand comes with a standard screw-fit to fit the microphone clips that are unique to your microphone. If your microphone doesn't come with it's own clip, like mine, this stand comes with a holder-clip-on which fits perfectly and holds the microphone with amazing grip. This stand clamps itself to my desk very well. No jiggling or rattling is experienced when firmly attached to my desk and provides a comfortable feel and usability. The microphone stand is packaged very well with two layers of bubble wrap for the ultimate protection. The only reason for the dock of a start is just because of the slow delivery. Normally for these types of items, I choose First Class as the delivery option. But, for some reason, on this item it was not an option so I was forced to go with the second class alternative. I ordered the item on the 6th December. The estimated delivery was 16th December - 8th January. It finally arrived on the 9th January. One day later that the already slow delivery estimate. Overall though, this purchase was well done and well chosen. Best of all, it only cost me £7.68 and that includes delivery and packaging. Brilliant!

When I first looked at this out of the box it looked a bit flimsy and thought that it was a good job I was going to be using it with a light microphone (Zoom 2) However, it's quite a sturdy thing and because of the 'locking' nut at the 'elbow' joint this stand can easily be used with heavier mic's. So I'm currently using it with my Blue Yeti and it's perfectly stable even with that big chunk of metal on the end of it. The best thing about this mic is that it greatly reduces the background noise from things making contact with the desk - the original stand for the Yeti was notorious for that. The thing is that I still need a stand for my Zoom 2!... so I'm buying another.

Per il prezzo è ok . I materiali non sono male , molle ben messe con registro posizione precisa . È più corto rispetto a Quelli che si trovano sempre su Amazon. Io lo uso per lo studio di registrazione , Consigliato

Perfecto para hacerte tu setup streamer cumple con los requisitos por dicho precio

L'ancoraggio al tavolo è perfetto. L'adattatore per microfono comprende anche l'impanatura con doppio adattatore per microfono verticale, anche se dalle immagini non si capisce.

Lo utilizo para poner micrófono. Va un poco duro.

Ero scettico a comprarla per quel prezzo pensavo fosse immondizia, invece è fatta veramente bene. la consiglio a che ne cerca una! non ho trovato difetti tranne uno che sulla mia scrivania non si può fissare perchè la tavola è troppo spessa e dove si fissa l'asta è più stretta quindi controllate bene la misura del vostro tavolo. la misura del pezzo dove si fissa l'asta è di 5,5cm. PRO - economica - fatta davvero bene CONTRO - nulla