FENTEC Printhead Cleaner 100 ML Printer Cleaning Kit, Printer Head Cleaning, Printhead Clean Kit for Epson HP Canon Inkjet Print Heads

The item came quickly, and had good packaging and detailed general instructions. It was fairly priced and it did the job well. A+

I thought I would give it a tryFirst time using a cleaning product on my printer does work very well and did clean the print headsYou learn from your mistakes a bit messy but I'll know next timeRead instructions carefully

So after my printer clogged up in particular the yellow print head on my Epson, I thought rather than throwing it away let me try the print head cleaner first,Upon first try I connected the tube to the print head and pushed through the cleaning liquid and left it for 24 hours,The next day I disconnected the syringe with the fluid inside and put the yellow cartridge back inside, and ran a print clean head on the Epson software. All of the colours worked, black, magenta, blue but not the yellow which was the blocked head.I ran approx 3 print clean head cycles but it didn't work, so I took out the yellow cartridge, and connected the syringe to the yellow head and again pumped through more cleaning fluid. I left it for another 24 hours, took out the Syringe and put the yellow cartridge back in, again I ran upto 3 print cleaning cycles through out the day not all at once.And to my suprise the yellow actually printed but with lines.So now on the 3rd day I connected the syringe and pumped more cleaning fluid through. Left it for 24 hours. Disconnected the syringe and ran a print clean head cycle, this time no yellow printed at all!Anyways I ran 3-4 print head clean cycles through out the day and on the 4th one the yellow started to print with Zero lines.So eventually after 4 days of perceivence I have successfully managed to get my epson printer working.If I didn't try for 4 days then I would have said this product does not work. So anyone trying this product I would advice be patient and give it a couple of goes. The nozzle within the print head does take a lot of time to dissolve the dried ink so patience is Key 👍👍

To clean a printer head is a messy job, no matter what tools you use. This kit does give you the basic materials to clean the heads, if there are minor blocks. It doesn't always works if the printer was out of use or had been blocks for a long while. For a more deep clean you do need to take parts out and to clean with the fluid this kit came with. It's messy stuff.

I suspect most of these solutions are the same and it's down to what's included in the kit.I had an Epson inkjet that had a yellow printhead that wouldn't clear using the printer's built-in functions.The Fentec kit came with necessary tubes etc. - mine only needed the main tube - but the instructions talked about using blotting paper. Who has that these days? So I had to first order some of that as well and it would have been helpful/obvious for this to have been included with the kit.I followed the instructions and some YouTube videos and successfully cleared the yellow printhead. I then repeated with the other heads after the black then misbehaved after it had been left drying out while I was messing with the yellow. All good now though - which is the main thing. So the product is certainly worth a go ahead of junking the printer!

First watch a youtube video of Epson print head cleaning. Product easy to use but have plenty of kitchen roll for cleaning up used fluid. Blotting paper works ok under the print head but there is a lot of inky fluid which fills the black foam rubber bed under the head. Kitcken paper to soak up excess is great. It is a somewhat messy business and gloves are required.The print heads had dried up because of lack of use and would not print properly despite head cleaning via the printer software. This product did the trick after two uses, one being overnight.Excellent product.

I was unable to use this product because the end of the caps that were supposed to fit into the tube were made of soft plastic and I was unable to fit them into the tube. I finished up buying a new print head on Amazon

I've had a printer in a non-functional state for a couple of months, not printing correctly, missing lines and not showing the expected results.After using this cleaner, I'm getting all my lines printed again with no need for head replacement or the like. It was easy to use and the product does what it says on the tin per say.Great product for a great price.