Deliver to Croatia
IFor best experience Get the App
Freenove Breakout Board for Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W/Zero W/Zero, Terminal Block Shield HAT with Pin Header, GPIO Status LED
Details
- BrandFREENOVE
- Model NameFNK0080
- Memory Storage Capacity1 TB
- CPU ModelNone
- Connectivity TechnologyGPIO
Description
🔧 Elevate your Raspberry Pi projects with instant GPIO insight and flawless connectivity!
- EFFORTLESS WIRING - Terminal block and pin header provide secure, easy connections to all 40 GPIO pins with standard 2.54mm pitch.
- COMPACT LIGHTWEIGHT - Slim 5 x 3.31 x 1.06 inch design weighing just 2.11 ounces fits perfectly in any workspace.
- REAL TIME GPIO FEEDBACK - Integrated status LED instantly shows GPIO pin states without interfering with your signals.
- PIN CLARITY FOR PRECISION - BCM numbering printed next to each pin eliminates guesswork and speeds up prototyping.
- SEAMLESS MULTI MODEL SUPPORT - Works flawlessly with Raspberry Pi 5, 4B, 3B+, 3B, 3A+, 2B, 1B+, 1A+, Zero 2 W, Zero W, and Zero – future-proof your projects.
The FREENOVE Breakout Board is a versatile terminal block shield compatible with nearly all Raspberry Pi models, featuring a 40-pin GPIO header with clear BCM pin labeling and an independent status LED that provides real-time GPIO signal feedback without affecting performance. Its compact design and secure connections make it an essential tool for professional-grade prototyping and development.
Specifications
| Processor | none |
| Card Description | Dedicated |
| Wireless Type | 802.11ax |
| Brand | FREENOVE |
| Series | FNK0080 |
| Item model number | FNK0080 |
| Operating System | Raspberry Pi OS |
| Item Weight | 2.11 ounces |
| Package Dimensions | 5 x 3.31 x 1.06 inches |
| Processor Brand | Broadcom |
| Number of Processors | 1 |
| Computer Memory Type | SRAM |
| Manufacturer | Freenove |
| ASIN | B0BFB618CJ |
| Date First Available | September 14, 2022 |
Reviews
D**Y
Great addition to your Pi.
So far just used this to feed power to my Pi and free up the USB-C connector. Works great and the LEDs keep you well informed of what's going on.
K**R
Awesome little breakout!
Love this little breakout board. Makes my prototyping faster and easier to verify.
M**Z
Intelligent design, works well
I have had good experience with all of the Freenove hobbyist products that I have purchased through Amazon, and this one is no exception.The thing I liked most about this board is the presence of signal-state LEDs on all the signal lines. All of the LEDs are driven through buffers - no significant load is placed on the GPIOs. Connector pin silkscreen labels are clear and easy to read, with supply sources and grounds clearly marked in reverse print. Inclusion of non-conductive standoffs, mounting hardware and screwdrivers is a nice touch.It might have been nice to include a short ribbon cable to allow the board to be used in external non-hat configuration, as you would likely want to do if you have your Pi in a case, and/or have another hat board mounted, such as a NVMe SSD hat. This is not a deal-breaker for me, as there are plenty of alternate sources for suitable cables available.
B**L
Good Value
Good breakout for a Raspberry Pi. Love the status LEDs and tie downs for prototypes.
B**.
Does what it should
It’s a breakout board. They either work or not.
T**R
Works as it should, LED lights are bright & colors show function. Good silkscreen labels too.
This is a nicely made board, the LEDs are colored & you can see at a glance what is going on with your GPIO pins. If only the GPIO software from Raspberry PI folks was as good (it is extra bad for the PI 5). But hey this is hardware, the lights work fine, they are even different colors by function. Silkscreen is clear & says what each pin is for, so you will be less likely to be "off by one" when counting pins.
B**E
Nice to have around.
Nice to have around
A**O
very good
like other reviewers say, the LED lights to signal that the pins are on or off suck. They are completely unreliable but thats ok for me.I bought it cause i need to be-able to remove/attach wires many times to my PI. But i also need them to be secure without using solder.Comes with pi standoffs & screws and 2 little screwdrivers. Everything you need to attach it to a pi.
Common Questions
Trustpilot
2 months ago
2 weeks ago
