
Desertcart purchases this item on your behalf and handles shipping, customs, and support to Croatia.
🔥 Weld Like a Pro, Anywhere, Anytime!
The MIG-140 3-in-1 Welder delivers professional-grade welding with MIG, TIG, and MMA modes powered by a 140A output. Designed for ultimate convenience, it runs on a standard 13A plug and features turbo fan cooling and gasless flux-cored welding. With synergic/manual controls and a full accessory kit, it’s engineered for precision, durability, and on-the-go versatility.
| Asin | B00OX40FZO |
| Best Sellers Rank | 473,011 in DIY & Tools (See Top 100 in DIY & Tools) 495 in MIG Welding Equipment |
| Manufacturer | Dirty Pro Tools ® |
User
Great little welder.
I had a Sealey MightyMig100 previously, and this is just as good, if not better, and it's cheaper. Well boxed, but had some residue inside that marked the welding cable. Doesn't affect how it works, and for the price, I can't grumble. I'm welding 3mm and 4mm angle and flat bar with no problems. Good amount of wire included. There is no way I would trust the cheap flimsy welding mask, so save your eyes and buy a proper auto mask on here for about twenty quid, and get some welding gloves. There is a welding brush in the box too, but again, its crap. Chuck away the cheap add on's and use the great cheap welder! Would be good for car bodywork if that's what you are looking for, just do a line of tacks on thin sheet metal.
User
Great welder I just need a little more practice
Used a few timesFirst time welder & works great
User
Good for the price!
When I first got the welder I noticed that the lid was not easy to shut I then realized that the screw holding on the handle, at the back, was protruding enough to hit the spool, once I cut off the surplus it shut just fine. I've used stick welders for a number of years, and I was interested to see the difference between the two. Firstly I would say the this MIG burns with a higher intensity producing a brighter arc and also a considerable amount of spatter. If you look at the photo you can see the top four beads of weld, ran on full power at a feed of about 6. The bottom four beads run on No.2 power, feed about 6 again. The beads are not a pro's "stack of dimes", but not bad for a MIG beginner. If you are going to use this for something "on show" like gates, then you'll need some cans of "anti spatter" spray or you'll do one job and creating another. The seller said that the machine couldn't use a 1kg spool, however i tried a 1kg spool without any problems. The good point about the MIG is that it is very good at "tacking" as the arc strikes every time and it is easy to get a spot of weld just in the right place. However a stick welder for me has less spatter, and the power is easier to control, to get it just right. Whatever you do, get yourself a helmet, doing circus tricks holding up a shield in one hand while trying to weld with the other, is a handicap that no amateur needs, they have the electronic ones at great prices on Amazon, so be good to yourself and protect your eyes, while using that other hand for support.
User
Damned good little welder.
Had this for a while. It isn’t a Millar or a Lincoln, but it puts down a good bead which is strong too. I’ve been welding for over fifty years and technology has moved on a bit from when I started, but this felt as crisp as my original Millar 200amp many years ago that I bought second hand, held together with duct tape and was massive compared to this little gem which seems to pack a heck of a punch on flux cored, MIG and happily put down a bead from a 3.2 electrode too. The lift-arc TIG was okay on mild and stainless steel so without doubt it’s a little gem. It has power to spare, it’s light and easy to set up, the only tning I do wish was that it had a Binzel removable MIG torch.
User
Excellent welder
I'm an amateur welder, fixing stuff for friends and family. A professional would probably need something more substantial.This is lightweight, easy to use and has done a great job on metal fron 0.5 to 5mm.I saw it recommended by several people on a mig welding forum so thought I'd try it when my previous welder died. I'm glad I did.
User
Good and bad points
Lets start with the negatives.Welding mask is useless - throw it away, it too dark for MIG and cheap buy an auto adjusting one for about £20It arrive with one of the case clips embedded in the box as it was place in it so needed fixing (about 30 seconds.Wire spool and friction installation is not detailed so the instructions are "Lacking" to say the least, I have MIG welded before so could work it out (See pictures) of it assembled and the wire drive assembly.Now the good points, it will take both 0.8 mm and 0.6 mm wire so low current is possible on thin metals. (You will need to buy 0.6 nozels too if using the thin wire option.It has both a high and low setting for both voltage and current giving you a better range of options over the 1 or 2. The wire speed is adjustable to enable you to get the right weld depth and width. I welded on high high for 5 minutes without overheating (it was a cold day 6 C)I have 2 Morris minors to renovate so will re-post after some extensive work has been completed or I have purchased another one.
User
Great welder for the price
The instructions are shockingly rubbish.The wire supplied was not great.However for the price point it’s a great welder with 4 power settings 1 &2 as well as hi/low. So you can have low 1 high 1 low 2?high 2 why am I telling you this? simple it’s not in the manual also it has wire speed so the higher the power the faster your speed. I’m learning to weld so I’ve welded 8 mm bars together along its length and 2mm plate and also around an exhaust pipe finding the right settings is key . And replace the wire that comes with it for a better brand. My bro in law who can weld had a go and loved it he said for the price its impressive
User
it was easy to use and did what I purchased it for
I used machine today for the first time, it was easy to use and did what I purchased it for. I have had an expensive welder in the past and this worked just as well. The wire feed was ok, it did not slip, the reel of wire did not birds nest, with a bit more practice I think I will be good at it, it is forgiving and compensated for my lack of skill. The wire loads in the top, much easier than the side, I think it is a very good DIY welder I am sure in experienced hands you could do a good job.
Trustpilot
2 days ago
5 days ago