BONTEC Dual Monitor Arm Desk Mount for 13–27 Inch Computer Screens, VESA 75x75/100x100, Full Motion Adjustable Monitor Arm with 360° Rotation, Height Adjustable up to 430mm, Max 10kg per Arm, Black

As someone who utilises several monitors for work, I wanted to reclaim desk space, without having to drill a load of holes in the wall for wall-mounting my screens. Enter this monitor stand. I had a couple of concerns. Firstly the top of my desk is a couple of inches thick and I didn't want to drill it, so would the clamping capacity of the mount be enough? Secondly, I was planning on mounting two 27" screens, which although not ridiculously heavy, aren't light either. I should not have worried. Firstly the hardware supplied with the mounting kit is ideal, including everything you need to get up and running and there is also a holder built into the cable management for the allen keys, so once assembled you can keep them handy for adjustments. The clamp fixes the mount to the desk very securely, holding the vertical post very nicely. The horizontal arms then attach very nicely, with plenty of adjustment vertically, so if you're mounting large monitors, you should have lots of space. You can then route the cables along the arms and down the vertical post. Overall, it is an excellent piece of kit. It only really does one thing, but it does it very well. If you have screens that are much larger than 27" you will end up using most of the horizontal travel in the arms, so you won't be able to pull the monitors very far forwards, but if you want to reclaim your desk space and mount your monitors without having to drill holes in anything, this is the way to go.

I bought the monitor arm to replace the single arm I had before, which was wobbly with any movement in the room and made me have to prop up my secondary monitor, risking it slipping. so this was to fix that and hold both together and off my desk. I am very impressed with the quality of the monitor arm as all the parts are metal and feel really sturdy, as well as being strong the paint finish is really clean. I had no defects or chips when mine arrived and I was really impressed that it had a really nice colour to it as I have seen some that look off-white. The set up was really easy as it's an easy fit to any desk and holds both monitors with the regular brackets that just can't be beaten. the size of it is really good as its no bigger than any other arm and it has a low profile adjustment system. The adjustment are really easy to make as each hinge has a screw that can be adjusted with the included allen keys. these hinges move very easy when loose and can then lock into position if you want to remove any allowence for change. the cable management that is included is the perfect size for the four cable that are coming from my monitors while also having enough room for the cable of my light bar and also an extra if needed. the fitting are placed in a big standard place which is very useful as it allows for movement to continue even with some shorter cables. overall very very happy with this arm as it has done everything that I wanted it to do while also eliminating having to much black and my setup dark, by having the clean white option. for the price isn't cheap its 100% worth it as other Dual arms on the market are asking for more and don't even have as good quality, backed up by the reviews on them... Definatly recommend, great for freeing up space and cleaning up the overall look of you set up.

Very sturdy and quite simple to assemble. The instructions are clear, and there aren't many places you can go wrong. The pivot points are very stiff out of the box, but can be adjusted with some effort using the Allen key (I put in a lot of effort, even thinking it would snap at one point). While listed as "height adjustable", this refers only to the vertical height of the dual arm. Your monitors will not be able to freely move upwards and downwards. I have two different brands of monitors, so when both are mounted, they do not line up at all. I'm a little disappointed by this, and it could have been clearer from the images. Rotation works smoothly however, and having one vertical monitor does eliminate the alignment issue a little. Very solid for the price, but do be careful if you have mismatched monitors (different resolutions etc.) as they will likely not line up.

So, there isn't an awful lot to say since its a very basic item however, I'll make sure to describe it to the best possible. Easy to Assemble? Quite, however, there was some points where the bolts were extremely tight and was a little worrying to adjust as I didn't want it to snap. Over all, the Assemble couldn't have been easier though, I had a 27" and a 24" monitor to strap onto the VESA mounts and it was extremely easy even for one person assembly. I would probably recommend to get another person to help if you can as it will make it must easier. I took maybe 20 minutes to set up? So it probably could have been a 10 - 15 minute job if someone was helping hold different parts and setting up the VESA mounts at the same time. Sturdiness, its been around 1 / 2 months since its been set up and its been great. The kit itself seems very well made considering the purchased price. I wasn't too sure if it was going to hold up since the 24" monitor is a little weighty but it is holding it quite well. Stability wise, the monitors are nice and firm with no rattling at all. Easy to adjust with the A Keys being attached to the Mount. For the price, I don't think I could have got anything better and it could honestly have been a £50 - £60 product if not more. Paying £28 was a steal and I would recommend this to anyone looking to mount their monitors.

This product is not perfect but at this price point it is extremely well engineered. It is also supplied with an extensive range of bolts etc. as well as two mounting options which cover most installations. I have set up a few different types of these stands for both 2 and 3 screen set-ups for video editing. The more expensive ones have sophisticated adjustments for lateral and vertical movement. The adjustments on this unit are simply engineered, but they work just fine. Ideally, and perhaps typically, the end user would be mounting an identical pair of monitors. I hadn't really thought this through so when Amazon offered me free, same day delivery (really?!) I jumped in like an eager schoolboy! I set this up to take a big curved Dell monitor on the left and a smaller 24" one on the right. Frankly, I didn't expect this to work but it is perfect, despite the 2:1 size difference is the monitor widths. A little fiddling and cussing, but at this price point I am very pleased indeed. FYI: I raised the entire pedestal by about 1 inch - drilled through the desk - using a couple of round alloy plates and a piece of M10 threaded bar, instead of the substantial supplied bolt. For most, the standard height adjustments may be plenty and I was cutting through a 2" thick desk, necessitating the longer bolt. The bottom line is that if you're reasonably handy, this monitor stand is sturdy, well engineered, well finished (no nasty sharp edges) and entirely recommended.

I thought I'd wait a couple months before leaving a review in case something disastrous happened but I'm happy to report this thing is incredibly sturdy. Took me maybe an hour or two to put it all together but if you're good at this sort of thing it may be quicker, the instructions were pretty easy to follow even for me. You're given the option between a clamp or a grommet installation - I chose the grommet as my desk is too thick for the clamp and I have an Ikea desk with a cable management hole. The desk is pretty shallow (a large part of why I bought this stand) and because of this and where I wanted my main monitor to be in front of me, I couldn't push it far enough before the arm hit the wall. This wasn't really a problem however, as each segment of the arms are connected via allen key bolts, so you can quite simply remove one of these segments and put it back together without it. These bolts are, reassuringly, very tightly screwed in, so just bear that in mind if you think you may need assistance with this step. I have no idea if this is an intended feature of this arm, but I have had zero problems with it in over two months and it looks like many other reviewers have also done this without issue. The arms themselves have not drooped at all in the time I've had this stand. Both arms are attached to one clamp, which then grips onto the central pole installed either via grommet or desk clamp, and so you aren't able to individually adjust the height of each monitor, though this wasn't an issue for me. You are however able to individually adjust tilt, swivel and rotation of the monitors, which I've also had no issue with. The cable management clips are good and should have plenty enough room for the cables coming from your two monitors. It also comes with a clip on the main pole which holes the three allen keys for quick adjustments if necessary, which I think is a really nice touch. One of the best purchases I've made in a while.

This is an amazing dual monitor arm. got it at £26. it's is reliable, adjustable, well balanced. worth it. I have two 27" monitors and I am very pleased with this monitor arm desk mount. top quality at an affordable price. well done Bontec.

I decided that I wanted to mount my monitors for two reasons - firstly the stands that came with the monitors offered no vertical adjustment And secondly my work desk is quite limited so the idea of freeing up space by getting rid of the stands was appealing. Glad to say to say that both of these requirements were met. The finished look of the stand is pretty standard as can be seen in the images I’ve posted. My monitors didn’t have vesa mount holes (annoyingly) so I had to buy adapters that do ruin the overall aesthetic but that’s no fault of the stand. In terms of putting the stand together,I can’t really complain,Assembly was straightforward and it came with all the required tools,screws and bolts. The build quality is absolutely fine for this price point,no issues there. There are two options for attaching the stand to a desk - a “clamp” and a grommet method. The grommet method is cleaner Looking but unless your desk has a pre drilled hole you will need to drill one yourself,I choose the clamp method. My desk is around 12-13mm thick (Basically not that thick),the clamp...“clamps” fine and feels sturdy enough for my two 24” monitors. The desk may not be thick enough to support larger monitors,I cannot say ,but it is my opinion that it is. In terms of vertical adjustments you can rise and lower both monitors together easily, unfortunately you can’t really adjust the individual heights of each monitor,this can be annoying if your monitors don’t line up perfectly...something to keep in mind. Although you probably could leave the joint that governs vertical movement loose enough so that you could adjust it,I wouldn’t recommend doing so due to the nature of gravity. Find a height that suits you and tighten the joint as tight as you can. You Can however At least adjust the viewing angle of each monitor although once again due to gravity I would find an angle that suits you,tighten as tight as you can and stick to it. In terms of horizontal movement you have a lot of options and Unlike the vertical joints you can leave these loose enough to move as gravity isn’t really an issue here. The stand comes with clips for cable management that can be attached to the arms and central pole. Nothing overly elegant but they do allow you to “hide” display/power cables a little, helps with the clean look. One last thing to keep in mind is how you want to arrange the monitors on the mount,you can have one or two monitors in either portrait or landscape which depending on your preference is nice. I prefer a Landscape “v” shape arrangement,due to my monitor size (24”) I had to have the back of the arms at such a pose that they stuck out a lot further than I thought. The result being that I had to move my desk out from the wall a few inches to facilitate this(see images). So this may be an issue if you can’t move your desk or it’s fixed in position against a wall. Admittedly I’ve only been using the stand for around 3/4 weeks so there is still plenty of time for wear and tear issues to present themselves but overall I’m happy with the purchase and would recommend this stand if you are looking for an affordable dual monitor mount solution.

11インチと15.6インチのディスプレイで使用しています。 13インチ〜と記載されているのでそれより小さいディスプレイでも使えるか内心不安でしたが（モニターアームを買うのはこれが初めて）、当然ながら規格さえ合っていれば使えるので11インチでも問題ありませんでした。 あとモニターが軽いのでアレですが、特にグラつきもなく使えています。 価格が安く取り付けも簡単だったので、非常に満足しています。

Solidny produkt.

This dual monitor stand is excellent, as it securely supports the weight of both my 27-inch 4K Gigabyte monitors. I no longer have concerns about it failing and potentially damaging my monitors. It provides a very solid hold, which has significantly improved the appearance of my desk. The stability is remarkable, with minimal movement. The size was ideal, and assembly was straightforward, taking approximately 15 minutes. It was a worthwhile purchase.

Bueno

Ich nutze diese Dual-Monitorhalterung mittlerweile seit einigen Monaten mit zwei 24-Zoll-Monitoren im Homeoffice und bin insgesamt sehr zufrieden mit der Lösung. Die Montage war unkompliziert und auch alleine gut zu bewältigen. Ich verwende die Halterung mit der mitgelieferten Tischklemme, die sich einfach befestigen ließ und einen sehr stabilen Eindruck macht. Nach der Installation sitzt die Halterung fest am Schreibtisch und verrutscht auch bei häufigen Anpassungen nicht. Besonders positiv fällt die Stabilität auf. Die beiden Monitore werden sicher gehalten und die Konstruktion wirkt insgesamt robust. Im Vergleich zu den mitgelieferten Monitorfüßen schafft die Halterung deutlich mehr Platz auf dem Schreibtisch und sorgt für einen aufgeräumteren Arbeitsplatz. Die Verstellmöglichkeiten funktionieren gut. Höhe, Neigung und Ausrichtung lassen sich grundsätzlich einfach anpassen. Allerdings benötigt man etwas Geduld, um die Monitore genau so auszurichten, wie man es haben möchte. Hat man die gewünschte Position einmal gefunden, bleibt sie aber zuverlässig erhalten. Ein kleiner Kritikpunkt ist ein leichtes Absacken an den äußeren Seiten der Monitore. Das fällt im Alltag nicht stark auf und beeinträchtigt die Nutzung nicht wirklich, eine komplett perfekte Ausrichtung ist dadurch jedoch etwas schwieriger zu erreichen. Das Kabelmanagement ist vorhanden und erfüllt seinen Zweck. Die Kabel lassen sich ordentlich führen und verschwinden größtenteils aus dem Sichtfeld. Es gibt zwar elegantere Lösungen, für den normalen Arbeits- oder Gamingplatz ist die Umsetzung aber vollkommen ausreichend. Mein Fazit: Eine stabile und praktische Monitorhalterung, die zwei 24-Zoll-Monitore zuverlässig trägt und für mehr Platz auf dem Schreibtisch sorgt. Kleinere Schwächen wie das leichte Absacken ändern nichts daran, dass die Halterung im Alltag überzeugt und ein gutes Preis-Leistungs-Verhältnis bietet.