Classic Ice Pop Moulds - Green

Ok so first off, its not silicone but a hard plastic which is a bit disappointing. Nevertheless its still an excellent lolly set up. We are keen on lollies in our house and have tried a variety of moulds, which tip and spill, split or the bits get lost. This one is by far the best. Feels well made. We tend to leave the green base permanently in the bottom drawer of our fridge freezer. Because there are individual clear plastic moulds which slot into the green bit you can extract one easily, run quickly under the warm tap to release, quick clean and its ready to refill. The sticks fit in the clear mould tightly and work well with the lid part doubling as a drip tray when eating which is handy. My daughter enjoys eating the lollies but they are quite big and as shes only 4, not managed to eat a whole one yet.

Really good idea. They make proper size lollies (not really small ones like most moulds) and you can make and take each mould individually. You have to run them under the hot tap to release from mould but not a problem. Reason for losing 1 star is that they are a fraction to tall to slide into my (standard) size freezer shelves which makes it difficult to put full moulds into freezer. Still worth it though.

I agree with earlier reviews that, in future iterations, a higher lip would be better BUT these are still the best ice lolly moulds we’ve had yet. They’re strong & sturdy, easy to clean, easy to fill and it’s so handy that you can make them individually. We’ve already made several flavour combos and know these will last (& be loved) for quite some time

This is a clever product, but the individual lolly casings don’t seem to perfectly fit the green stand which means you have to be careful when filling the mould. Rather irritatingly, the measurements of the item are wrong on the product description which meant it almost didn’t fit in my freezer (even though I’d measured carefully before purchasing it!). The assembled product measures 17.5cm high (ie including lolly sticks). The measurement on the description must only refer to the green stand.

These are great, best out there

Love these ice lolly moulds. I make up a healthy smoothie and freeze it into these ice lolly moulds. They are quite big and only fit inside one of my freezer shelves. But once they're frozen, I take them out of the green stand and lie them down to create more space. Easy to wash by hand or dishwasher. Easy to take out of the stand and holders. Very well designed and nice green credentials.

They're lovely and make a classic lolly but I have to serve them to my children with a bowl as they drip all over their hands in minutes. A tiny lip at the bottom (over the handle) would prevent this and perfect the design. As others have commented they're also very tall when in the stand so bear this in mind when ordering. We can just about fit them in our topmost freezer compartment but due to expansion when frozen, tend to have to squeeze them out when the lollies have frozen. Therefore we pop them out and put them in a drawer once they're made. My children love them and we've had lots of fun experimenting with different flavours and recipes. Not convinced they're worth the inflated price but have peace of mind knowing they're chemical free.

I bought these for little treats for the family during the hot weather. They are easy to use from making the ice lollies to eating them. They do take up quite a lot of space, so would recommend using in a large freezer, this is a 6 mould, I think there's a smaller one. I have a chest freezer which I put them in as they need to be level while freezing. Once frozen you can remove them from the holder and make more. Just ensure that they're properly solid, alcoholic ones may differ. To release the lollies from the mould, run under hot water gently squeezing the silicon mould until it releases. Don't pull too hard or the stick may come out! Perfect homemade ice lollies within 24 hours.

I bought the green Zoku plastic popsicle molds, and they work really well for making homemade popsicles. The molds are straightforward to fill and come with sticks that fit securely. The base is designed well, so there’s no mess while freezing. The popsicles are a good size, not too big or too small. Removing them is easy; you just run the mold under warm water for a few seconds, and the popsicle comes right out. The plastic is durable and easy to clean and the popsicle mold fits in my freezer, though I’ve found it’s best to place it on a flat surface for stability.

Great popsicle mold, it doesn’t spill and love how the forms come out of the holder to make it easy to free the popsicle out of the cup. I throw any fruits (and sneak the occasional veg) that start looking wonky into the blender with a bit of juice or milk and my kids adore these popsicles.

Sono un...'MAESTRO SORBETTISTA' da anni ed anni, ma non ho avuto mai un 'kit' di produzione così SIMPATICO ED EFFICIENTE. LA QUANTITÁ di ogni formella (90 ml) mi soddisfa appieno, dato che in precedenza le mie formelle erano sempre poco capaci. Che cos'è un decilitro scarso, in fondo? Niente! Poco più di mezzo bicchierino! Eppure vi garantisco che la sensazione è quella di una quantità di succo (o di frullato) molto più abbondante. LA FORMA 'stondata' del prodotto finale, inoltre, è quanto di più attraente: professionale, sì, ma al tempo stesso piacevolmente insolita. Un'unica critica, se così si può dire? Il COSTO piuttosto elevato. Ma ho ovviato a questo acquistando due set, con conseguente spedizione gratuita ed aggiungendo un buono omaggio. C'è da dire, comunque, che quest'oggetto è fatto per durare 100 anni. Un consiglio pratico. Se, come me, avete problemi di SPAZIO NEL FREEZER dopo le 7-8 ore necessarie al congelamento sentitevi liberi di estrarre i funzionalissimi contenitori interni (trasparenti) dal supporto esterno (verde) e metteteli in un pratico sacchetto: l'ingombro verrà immediatamente dimezzato!

Estos moldes para polos son geniales tanto en tamaño como en comodidad de uso. Son ideales para adultos, que es lo que andaba buscando, y se muy fácil limpieza. Los moldes pueden sacarse de forma individual del bloque y constan de 3 piezas: el molde, el "palo" y una protección antigoteo. El que las tres piezas sean independientes facilita muchísimo la limpieza, en otros modelos la parte antigoteo va unida al palo y resulta más difícil de limpiar. Por último, además de helado de hielo (zumos de fruta, por ejemplo) recomiendo probar a hacer polos con leche de coco. ¡Están riquísimos, se pueden hacer de todos los sabores que se os ocurran (ahora voy a hacer helados de galleta) y es una gran forma de que los intolerantes a la lactosa disfruten de estos pequeños placeres de la vida!

Diese ist nun meine dritte Zokuform und auch meine liebste. Das Eis hat die klassische Eisform und ist mit 90ml auch sehr groß. Im Gegensatz zu den anderen Zokku-Formen sind diese hier nicht aus Silikon, sondern festem Plastik. Der Grund wird sicherlich in der langen Form liegen, die sich mit Silikon nicht so stabil machen lässt. Ich finde es aber nicht schlimm, denn man bekommt das Eis problemlos raus. Einfach einen Moment liegen lassen oder ein paar Sekunden unter heißes Wasser halten. Und schon flutscht es raus. Das erste Mal habe ich mit ein wenig erschrocken, weil es ziemlich laut knackt, wenn sich das Eis von der Hülle trennt. Aber nun weiß ich es ja und bin drauf vorbereitet. Ich mache in den Formen meist Wassereis mit Bolero Getränkepulver. Sehr lecker und ohne Kalorien. Da kann man sich dann auch mal ein Eis mehr gönnen. Total klasse finde ich, dass die Formen nicht fest mit dem Ständer verbunden sind. So kann man einfach ein Eis aus der Truhe holen, ohne dass man das ganze Set rausnehmen muss. Und die festen Eisformen kann man dann gleich wieder füllen und in den Ständer stellen. So kommt es zu keinem "Engpass". Die Form hat bei mir inzwischen einen festen Platz im Gefrierschrank und wird immer gleich wieder gefüllt :)