Bialetti Moka Seal and Aluminum Filter, White, 72mm, For 6 Cup Coffee Maker

Unlike the original filter that came with my Bialetti Moka Express, the new one is flat. The lack of ridge marks makes it confusing, as to where the filter's going to sit. First of all I tried having the filter facing out, so that I could naturally put the seal around it. This resulted in their being a slight gap. This meant that when I made a drink, steam and residual coffee would come out the side. I was convinced that the filter was too big, as it could sit on top of the top's rim; quite easily. But this was not the case at all; all I had to do was to have the filter flat facing up, with the 'Made in Britain' sign facing down. Here the seal fits flush with the filter, and the bottom is easier to screw on: as the other way around it was harder. Once correctly in place, this is a great replacement filter.

What a pleasant surprise. The Bialetti mokka has been such a great companion for the last 4 years. It's only now that it was in strong need of a new gasket and I was really worried I would have to buy a new coffee maker. No need to worry as Bialetti has you covered with all the replacement parts you need. The gasket fits perfectly once you remove the (remnants of) the previous one. I did this by prying it off with a blunt knife, and then washing off the last bits with a dishes scrub. Once done, you have the choice of either replacing the filter, or trying to wash it off (which I did). This is great, as again, the manufacturer does not force you into replacing any additional parts than those that are no longer functional. I am so in love with my Mokka and I bet this gaskets will give it at least another 10 years of daily use. Well done Bialetti, you designed these things incredibly well, and one can really tell.

I bought these to replace a rubber seal that had worn out after many months of coffee making. The seals will easily last 6 months of regular use, so long as you look after, and clean them, well. Better still, you get three in the pack, so definitely value for money. It is important to know the size of your stovetop coffee pot before ordering; this is not a one size fits all product. Also, buyers who require frustration-free packaging should be aware that the product is delivered in hard plastic. I needed scissors to open the pack. I’ve tried the cheaper, unbranded alternatives in the past. My advice - spend the extra pound and buy the Bialetti. Currently retailing in the vicinity of £5, it’s little more than the price of a coffee on the high street, and worth every penny.

Tad on the pricey side considering they cost next to nothing in Italy, but in the absence of anyone visiting from there for a while, had to plump for these. Performance wise they're absolutely fine and a welcome respite from the nearly perished rubber of my previous filter. My morning espresso is fun to make instead of a bit of a pain!

I have an unidentifiable genuine Bialetti "6" cup ( 1 MUG, I have a serious habit ... ) stainless moka pot, that is at least 15 years old. It doesn't match any of the 100s of online pictures that I've looked at. The RUBBER gasket originally fitted eventually deteriorated to the extent that the pressurized liquid was seeping out from the screw join, and wasn't retaining the perforated filter plate properly. Careful, workshop, measurement showed that I needed an outside diameter of 71 mm, and an ID of 56. Some sellers had these listed but unavailable. Some that had them were asking a huge price, and their descriptions were suspect. I bought this product because there were three gaskets, it came with a replacement filter plate, and was fractionally oversize. It was the correct material for a stainless pot, being rubber rather than silicone. Having three gaskets gave me the opportunity to "have another go" if my first attempt at trimming down the gasket to size didn't work. Having the correct filter plate for these gaskets meant that I could simply use that plate, and not have to modify the inner hole which would have been much harder. VERY careful trimming with sharp scissors (it took quite a time, and a steady hand) resulted in success on the first attempt, and I have two spares for the future. If you have an odd sized Moka pot that needs a new gasket, consider this option. It worked for me. Mugs of coffee again.

I'd given up hope of finding the correct size washer for the Bialetti and was about to consign our 6 cup coffee maker to the bin and buy a new one. The product not only provides two washers but also a filter for less than I was charged for a single replacement washer (which did not fit), from a local department store. It's given a new lease of life to our Bialetti and the coffee is as good as ever. Be sure to use the link in one of the reviews, the key is selecting the right size.

If taken care of, your Moka Express pot can last a very long time and these are the most frequently required replacement parts. The gasket seals need replacement after 1-2 years of daily use (longer if you don't use quite so often) and the filter needs replacing every few years so this will keep your pot working well for a good few years yet. The gaskets are identical to the original one in the pot and fit and seal perfectly and the filter again is a perfect replacement and allow you to enjoy coffee from your favourite pot for a long time. Great service with next day delivery was good too. Highly recommended product.

This is the definition of an excellent quality product, really. And honestly only stuff like this should be getting five stars. I should really go to all my other reviews and knock one star off them, as compared to bialetti, nobody gets even close. So yeah, this washer will get you going for two to three years, then you're gonna replace it and have your coffee maker good for another 3 and so on. Consistent results, every day. God damn it, I just love this company. Seriously.

Nota 10!

Perfetto.

Excellent, It fits perfectly.

Recambio original y de calidad superior. Merece la pena

top qualité et parfaitement adapté