VonHaus Single Monitor Arm Desk Mount for 13-32” Screens - Adjustable Bracket

I’ve been using the VonHaus Single Monitor Stand (13–32” with desk clamp) for a little while now, and it’s one of those upgrades that makes a bigger difference than you’d expect. The biggest win is the extra desk space. Once you clamp it to the desk and get your monitor mounted, the whole setup just feels cleaner and less cluttered. No bulky stand taking up room—it instantly makes the desk look more organised. Adjustability is where it really shines. You can tilt, swivel, and rotate the screen pretty freely, which makes it easy to find a comfortable viewing position or even flip it vertically if needed. It supports full rotation and a good range of tilt and swivel, so you’re not stuck in one position. () Build quality is solid for the price. It’s made from steel and feels sturdy once tightened properly. I was a bit worried about wobble at first, but once everything’s secured, it holds the monitor well (as long as you stay within the weight limit—around 8kg). () Installation is fairly straightforward, though it does take a bit of patience lining everything up—especially if you’ve never mounted a monitor before. It comes with the fittings you need, and once it’s on, you won’t really need to mess with it much. A couple of small downsides: the adjustment isn’t as “smooth” as more expensive gas-spring arms—you might need to loosen/tighten screws to reposition it. Also, if you’ve got a heavier or larger monitor, you’ll need to make sure it’s properly balanced or it can slowly tilt over time. Overall, for the price, it’s a really solid buy. If you want to improve your desk setup, free up space, and get better ergonomics without spending a lot, this does exactly what you need.

This is a well designed and constructed TV stand [or in my case monitor mount] Everything fits together perfectly and the black finish appears to be durable. The stand comes in three parts: a vertical column, an adjustable horizontal bar and a VESA 75/100 mounting plate. The column can either clamp to the desk or - if you have access to the underside of the desk top - it can be secured by drilling a10mm hole through the desk, passing the fixing bolt through the desk and screwing it into the bottom of the column. This is the method I used and it's absolutely solid with no movement. The weak point, and it's a problem with so many VESA-mounted screens, is the fixing of the VESA plate to the mount. It is designed so that you screw the plate to the back of the monitor/TV and then lift the whole thing and lower onto a receiving bracket at the end of slide on the horizontal bar. The mount is secured to the bar by a small screw. It doesn't matter how much you tighten this fixing there is always a degree of play and it's very difficult to adjust the vertical position of the monitor. It takes a lot of patience and trial and error to set it up as you want it. Once in position it's fine and the stand is an excellent space-saving piece of kit that I would recommend. But four stars because of the VESA mount problem

Solid stand, much less faff than some alternatives (others will work fine, but VonHaus just works consistent and looks a bit better)

I bought both the duel and single stands for myself and my partner. They are of very high quality. Chunky metal pieces that hold my two 7KG 27 inch monitors in place with ease. They give you total control over rotation, height and tilt, meaning there are no compromises with functionality switching from my default monitor stand. Easy to assemble with more than enough parts for different monitor types. The base is strong and sturdy and while I type this, the monitor is held solidly in place with no movement. Given the functionality, cable management and tidy look this gives your desk, using this stand instead of the default monitor stand is a no-brainer. Highly recommend this purchase.

Very sturdy. Good motion for my monitor, would recommend

The product itself is heavier than expected, but this attributes to the high quality of the parts used. This surprised me considering the price, but I'm certainly not complaining as I am confident this is a product that will last! Assembly was straightforward enough, although parts of the instructions could be clearer. The clamp and pole attaches securely to my desk, and the arm to that. I didn't have any problem attaching my monitor to the arm following that. Both sections of the arm and the pole include a cable tidy, which is certainly a welcome addition. The pole cable tidy also includes 2 holes for the hex keys that are required for adjusting certain parts of the mount e.g. height adjustment and tilt adjustments, so they are always to hand if needed. Movement of the arm feels just right - not too tight and not too loose, just move the monitor about to the position you like. Tilt adjustment requires loosening a screw with one of the provided hex keys, which is easy enough, but this is where my biggest issue lies (which really isn't that big, but it was a little annoying at the time) - After noticing that my monitor was tilting forward a bit, I adjusted and tightened the screw to find it slip forward again. Not by far, it seemed to stop at approx 3 degrees each time (so says the spirit level on my smartphone). On closer inspection, I noticed that the nut isn't quite catching where it should and had to find a thin spanner to fit in the gap to hold the nut still while I tightened the screw futher. Sorted now, but something to be aware of. It wouldn't put me off buying another, that's for sure! Pros: - - Strong, well-made, high quality - Flexible arm for positioning your monitor - Well priced Cons: - - (minor) Tilt screw/bolt doesn't tighten properly without addition tools

When the boxes arrived (I purchased two) I was surprised at the weight expecting something quite flimsy because of the low price. On unwrapping I was impressed by the manner in which the component parts were packed and wrapped in several separate boxes and bags. Assembly is simple enough and the instruction sheet is adequate except with respect to the section referring to the additional large metal disk with two slots cut in it for use on thicker desks. It appears to need you to replace the existing clamp unit by using this additional disk. It didn't make too much sense but as the clamp easily fits on my 40mm thick desk it wasn't a problem I encountered. The construction is sturdy and the welding is good . I had no problems with the powder coating making fitting the screws difficult as a few people have mentioned. When doing up the clamp holding the adjustable arm to the upright pole you may find that you'll need to use something to enable you to get more turning force on the hex key as doing it by hand alone did not get any where near an adequate clamping force to stop the arm from slipping down the pole. I levered mine using a 10 inch box spanner. Overall I'm very impressed especially for under £20 a piece. The only problem I encountered and nothing to do with the unit itself was that one of my monitors used non-standard VESA bolts and none of the comprehensive selection which came with the stand fitted this monitor. The monitor in question is an Emprex for the record but luckily I had suitable bolts in my workshop. Very happy with my purchase.

The description claims this mount can hold up to 8 kilos, mine's struggling with just 6. With that said, this is a very cheap and effective way of mounting your monitor to your desk and freeing up space. For light monitors I would recommend, anything close to 6kg and above I would proceed with caution. It's easy to assemble and gives you the option of either clamping to the edge, or drilling a hole through the desk and clamping it through that way. If you need to adjust your monitor position regularly you're probably better off with a hydraulic arm as this is inconsistent and awkward in it's motion. Rotation to portrait is good (no hard stops though), but the arm hinges move at different pace and the tilt is frankly awful. if you're looking for something cheap and dirty, this is adequate. If you have the option of spending more - you should.

Satisfaite. Elégant, simple à installer et solide.

Sehr zufrieden – tut genau, was er soll! Ich bin wirklich zufrieden mit der VonHaus Monitorhalterung. Die Montage war unkompliziert, alle nötigen Teile waren dabei und die Anleitung leicht verständlich. Der Arm wirkt stabil und hochwertig verarbeitet. Besonders gefällt mir die Flexibilität – Höhe, Neigung und Drehung lassen sich problemlos anpassen. Mein Monitor sitzt sicher und der Arbeitsplatz wirkt jetzt viel aufgeräumter. Für den Preis absolut empfehlenswert!

Guter Monitorhalter, erfüllt alle Voraussetzungen kann man nicht meckern

bien

Der Tisch sollte nicht zu dick sein, sonst wird es schwierig. Sie hält gut und sieht auch schön aus. Für den Preis gut, man sollte aber vorher schauen, ob die dicke passt. Am besten nur für dünne Tische. Ich hatte Probleme und musste andere Schrauben kaufen.