WUTA Removable Circle Leather Hole Punch Lacing Stitching Professional Working Hand Tool Kit Round Hole Puncher Craft Chisel Branding Design Circular Cutting Punches Kits (2G 3mm-(2+5+10))

I actually bought 4mm 2+4+6 punch set and purchased multiple of this item. It is a pain to change the punches each time so better to have it in full sets. This item comes with full set of pointy prickers + 3 extras and also it comes with 20 round hole punches to change it out. Extra 3 screws and a L wrench so I think it is a nicely packaged set. I had no problem using the round hole punch and goes through two flat layers of 6 oz leather stacked. I am using a raw hide mallet and a Low Density mat mounted to opposite side of my riveting block. I mainly bought these to make a cover for my handles very similar to a baseball sewing. Other prickers make much larger holes when the seams are pulled together. Happy with the buy. 8-25-22 Addendum Pointy prickers do punch well without touch up. I have a microscope at work so I am always in the habit of looking under it. Ends of the prickers are as machined and also studying the pricked holes, it is round but there is a light tear on the hair side, light and nothing to be concerned. I have a cloth lapping wheel with white compound and a quick couple of second (in handle), turn over seems to make the ends smoother and does seems to go in easier remove. Holes are bit cleaner. This is too much and normal person does not have this setup. Still happy and have two sets and tempted to buy more since these are on big sale now but not giving into the temptation. Addendum: 8-27-22 Last night was first time I used this for a holster type where I had to get the hole very close the the edge of the folds. Couple of issues with this type: - Careful which side the set screws are facing since these tear/seriously mark the leather when punching. - The end corners will make a gouge on leather if the holes are made in an inside corner. - The punches are mounted in about 1/4 in of metal so there is a big step that also will scratch the leather sides. It is just the design and construction of these type since there has to be some metal for these to sit in. - I will take these to work and grind the ends to an angle and round/polish so these issues are minimize. * For normal sheets, this works fine and still happy for these type of work.

These hole punchers are FANTASTIC! The ability to switch out the tips when they get dull is wonderful, and also being able to go between pricking tips and actual hole punching tips is great! They are made fully out of metal and feel super sturdy, so I don’t feel like I’m going to break them when I’m hammering through thicker leather! I plan to slowly collect every width they have because these work super well!

This is a very accurate set of punchs for leather work, high quality, and quite frankly very well packaged.

Excellent quality perfect spacing very sharp

I've had this set for a while. It's done well for me. Makes hand stitching much easier than with other types of stitching sets. The quality is not the best but good for the price. I bent one of the "blades" on my two hole one trying to punch leather that was a little too thick. Of course it has the extra blades with it. I like it and would buy it again. I would say don't try to go over 8 to 9 ounces of leather at a time with them and it'll be fine. Worst part is trying to pull the big one out of the thicker material.

These are so high class to me, lol! Worth the price. Removable pieces to make it exactly how you want to stitch. Comes with pricking and punching metal things. The punch is small tho, but it's the size I wanted. Nice weight, sturdy. Makes leather punching a breeze. Update: I hadn't used this much until recently. I think mine was returned and resold as new. The smaller one, with the 2 forks, broke. I didn't realize that the 'forks' were already bent. The tool was also bent and one of the screw nob things is stripped. The poky forks dont seem to be made of steel, I think they are an alloy of some sort. It snapped clean right at the joint. The hole punches seem like those are steel. I gave it 3 stars instead of my initial 5, 1. it broke, 2. the tool was already bent, and 3. One of the screw nob things is stripped, making me think this was a returned item.

high quality tool. TIps are sharp (as they should) and screws, screw holes are well cut, unlike cheap chinese counterparts

Product works but tool-key provided does not fit the punch tool hex set screws. This makes the tool not functional.

3.85のサイズを購入しました。思っていたよりしっかりとした作りで満足しています。

穴に詰まった革が取り除き易くて良いです、穴も綺麗にあきます、以前使っていたものは、すぐ詰まり取るのが大変でした、欠点は、ハンドプレス機には使え無い所です

コメント評価以上に良い！コメント評価では穴詰まりで使えない等の評価でしたが、類似する商品が見つからないため、ダメ元で購入しましたが、長い目で見ないといけないのかも知れませんが、切れ味良く満足です。丸穴あけるの際は、コルク板などの上でないと裏側の穴が小さくなり針が通りにくいです（要注意）10本目と2本目を買いましたが、4本目の際は、10本目を4本目出来るので便利！

This punch is good quality. We very solid tool for piercing and punching holes in leather. It arrived earlier than expected so bravo to vendor. I liked it so much that I ordered extra parts as this tool will last for years.