PLA Filament 1.75mm Black 1KG, 3D Printer Filament Dimensional Accuracy +/- 0.02mm, 1kg Cardboard Spool(2.2lbs) 3D Printing Filament Fits for Most FDM 3D Printers

On time and what seems to be a good price. I just bought my wife a 3d printer for mothers day. She is trying out different PLA filaments. The PLA arrived with no defects and vaccuum sealed. Prints have come out very good with no sputters, stops, breaks or I'll affects. Flashforge Adventurer 5m. Hot climate. No issues.

For starters, it arrived quickly. I am becoming increasingly impressed with Elegoo filament. It's consistent and prints beautifully. It has good print bed adhesion and is nice and tough. The finish is always nice.

Update 10/04/2024: BACK AFTER 1 DAY SHY OF A YEAR! So it turns out the filament wasn't the issue, but was a hot end fan and a power supply fan that were causing the issue. Apparently they were both dying and not cooling the heat sync and/ or power supply adequately. Those were causing intermittant issues with almost all filaments other than one brand that starts with and O. This filament is printing really well currently, and havent had an issue with since doing a major overhaul of my entire hotend assembly and replacing the powersupply fan. 5 Stars for Quality of the filament 5 Stars for quality of the prints with the filament 5 Stars for Elegoo Customer Service (Though they should get 10!) 5 Stars for Elegoo all around from me! ---------------------------------------------------------------------------------------------------------- Update 10/05/23: If I could rate customer service at Elegoo, I would give it 5 stars! Very responsive, and willing to try to get issues taken care of in a timely manner. However, I am settling on a 2 star review of Elegoo's PLA and PLA+. I was sent 2 rolls of their PLA+ to replace the PLA rolls that I purchased, and spent the better part of 2 evenings experiencing the same issues that I originally had with their regular PLA (Under extrusion, clogging, etc.). I even went back and used my filament drier on both of the previously purchased rolls of PLA for 60 hours each, and still am unable to print with them. I love Elegoo, and will always recommend their resin/resin printers, but I can not recommend their filament at this time. I'm going to try to dry out the PLA+ rolls for 80 hours each and see if that makes a difference. Update 09/25/23: Adding 2 stars to my original review. Elegoo customer service was super quick and friendly with a response and reached out to me to offer an option to replace or refund my purchase. I chose to have them replace the rolls, and they stated that they would be sending out their PLA+. Will update review again once I get a chance to test out the new rolls! I bought 2 spools of the black, and printed just fine through half of the first one. Then I started having issues with adhesion, under extrusion, and clogs in my hot end. I was printing at 205C, and leved the bed between each failed print just to rule those 2 factors out. I even tried to increase the temp, but still had print failure after print failure. So I thought maybe the filament had taken on some moisture. I opened the second roll, and the SAME issues developed. I love most other Elegoo products, but would steer clear of this filament for now.

I’ve almost exclusively switched to elegoo filament for both my printers (I have a flashforge and an Anycubic), minus extremely niche colors. I have had very consistent prints with zero failures while using elegoo’s various filaments (differing colors and plastics). Every roll I’ve used has been neatly wound so far, and the price is great. I think at this point out of my 30-40ish full size spools, about 75% is elegoo.

I bought a spool of ELEGOO beige color for a project. It started off with a couple MAJOR issues with bed adhesion: after small successful tests, I ran the large main job. over halfway through, parts detached from the bed mid-print and collided with other parts, knocking them loose and ending up with a huge spaghetti tangle. I lost a distressingly large amount of filament on that failure - I didn't weigh it, but I estimate nearly half the spool. I'm contacting their support line in hopes they'll help replace the lost material somehow, since their suggested bed temp range didn't work at all. (I'll update with how their service is.) I did some trial-and-error adjusting on the suggested bed temps, and lost some more material in the process. I'll have to look back and see what temps I ended up with, and edit this review to add them in case it helps anyone else. After the temperature adjustments, the project printed impressively well. Smooth matte finish, minuscule layer lines, and a nice beige color tone. After the unfortunate waste from the first failures and the finished main project, I decided to print another small detailed project with the leftover filament. I purchased an .stl model of the gargoyle candelabras in Disney’s Haunted Mansion “stretching room”. The last two pics are the originals in Walt Disney World, for reference. (The 3D model is by SERGIMEN3DART on cults3d.) I fired off this smal-scale version before committing to a full-size print. The model is split into 7 parts. I printed them at .10 layer height on my Prusa MINI+. They came out waaaay better than I expected... especially at such a small size! It's about 160mm wide, total. I quickly removed the support material and dry-fit the parts together. No other post-processing has been done. With a couple birthday candles clutched in his fists and an appropriate perch, he's ready for some pre-paint review pics. The details are sharp and clean, and the layer lines are almost invisible to the naked eye. I've still got to do some light cleanup, then prime, paint, and weather him up. He'll be a perfect lil watch guard, sitting on the shelf above my desk to keep an eye on things and ward off bad vibes and evil spirits. ;) I'll definitely be buying more of this filament. Just gotta decide which color I could use next....

I was able to get this at a great price and needed Black Filament because Bambu was out of stock. This worked really nicely and has a nice shine to the black, almost silk. The prints are strong, and just had a few issues on curves and smoothness. Very light stringing in some fill areas. I do love the price point, and have it as a backup. No clogs or issues, just some finishing issues. I changed my settings and messed with temperature which I don't have to do with Bambu. Would I by again: Yes, but only use for certain projects and as a backup for when I run out of Bambu black.

The filament color is spot on and it prints nice. My first time printing with a wood PLA and it came out pretty nice. With all 3D printing there are always tweaks that need to be made but happy with the product and how it prints.

Bought a hi speed printer and this filament is PERFECT. Sticks to the bed, crazy supports don't fail, smooth outer shells.

Filamento excelente

Some people have been giving poor reviews and I'm sorry they had a bad experience but I've tried three different colours in the Elegoo PLA Pro line and I'm VERY happy with the results. This white one in particular is the whitest PLA I've printed with and I've tried 5 different brands / lines in total for white. It prints really smoothly with zero issues whatsoever. The winding on the spool has been great with no trouble at all. Prints come out strong and walls/tops have a fantastic texture to them. Noticeably nicer than the normal Elegoo PLA in white. Prints came off the bed (after cooling) with the lightest of touches. I use a hotter starting bed temp of 65 for the first layer to ensure adhesion but I do that with most prints. Prints stick to the bed without issue. First layer is clean every time. I can't measure the moisture level but I've had zero "pops" or bubbles and it feels strong and bendy, not brittle, so I'll give it an A+ in moisture as well. Will buy again - I hope they broaden the available colours.

Me gustó mucho. Excelente para mi impresora 3d creality k1 máx. Soporto muy bien las altas velocidades de 250mm/s. Imprimí ese dinosaurio flexible y quedo muy bien. Sin errores

Easy to use and its very durable. I recommend all Elegoo filaments

Best Quality Filament And Role Stand