Flexible Repair Adhesive: (3 x 5g) Clear Glue - Highly Durable, Waterproof Glue for All Repairs

Arrived in very good time - it's an excellent adhesive for shoe soles, flexible and waterproof - dont get it on your hands, you won't gat it off.

The Stormsure flexible repair adhesive in these three little 5gm tubes is ideal. I always keep some in stock. The glue has a reasonable working time of a couple of hours, so no panic about aligning a join, but the converse to this is that one needs to arrange a means of holding the join in position. “Fast!” can mean waiting 24 to 48 hours for full strength, depending on humidity and temperature. It also tends to spread around while unobserved, so the restraints securing the pieces might also become bonded to the work! Be aware, once the seal is broken on a tube the contents will set in a few weeks regardless of closing the top. The glue has a reasonable working time of a couple of hours, so no panic about aligning a join, but the converse to this is that one needs to arrange a means of holding the join in position. It also tends to spread around while unobserved, so the restraints securing the pieces might also become bonded to the work! Be aware, once the seal is broken on a tube the contents will set in a few weeks regardless of closing the top. One of these tiny tubes has fixed several recent problems including: . A split end on my Ryobi leaf blower. . Securing the aged flush-bellows on a couple of cisterns so they responded properly to the pneumatic button push . Securing the bumper strip on a vacuum cleaner . Sealing and locking a reversing camera's mounting bracket nuts and camera lead to a fitting on the car.

This is the right glue for shoe repair I believe. Very strong adhesion, quite thick, tacky and high viscosity and fairly toxic, came with gloves, my trainers were coming apart from the vulcanised rubber sole to upper, I got 60% adhesion the rest dried hard but clear. Way better than all the other epoxy resins. My tip is to fill the gap with a cocktail stick then hold with masking tape and fill boot with scrunched up paper and leave for 48 hours or use clamps or something. Time will tell how this holds and if I need to reapply the glue as I could have used the tape better and inserted shoe filler to allow the glue to adhere properly. You also need to clean and lightly sand just like for a bicycle tire or something. Generally happy as I think I could have used more skill in getting a better hold. Hope my review helps and gives other tips to use it as best you can. Time will be a teller.

This product successfully repaired my split Wellington boots, and I've tested them multiple times, even a river crossing, resulting in dry feet! I cleaned the damaged area with rubbing alcohol & sandpaper, then applied the first coat. I allowed it to cure for 24 hours, then applied two more coats, allowing 24 hours cure between each to finish the small tube.

Good glue: I used this to reattach some waterproof taped seams that had come away from the fabric of my work issued GoreTex. Effected a permanent and robust repair, but needed to be clamped in place with a clothes peg for best results.

Used to repair a three inch pocket tear on a Barbour jacket, this has done the job perfectly. Easy to apply effectively after watching a couple of Stormsure instructional videos on YouTube, it cures fairly quickly and provides a flexible, waterproof seal as advertised. It's far from being an invisible mend of course, but it's not "point and laugh" noticeable either. Great stuff, highly recommended.

The Stormsure x3 pack is what I ordered and is apparently the best thing to get for repairing my waders but the package was incomplete. It is advertised (and says on the pack) as coming with a pair of gloves and an instruction leaflet - my didn’t come with either gloves or instruction leaflet. Not the end of the world on the gloves but the instruction leaflet would certainly have been appreciated. Probably not the seller’s fault - they can’t check every pack of course - but frustrating anyway.

Prima product

bought this to fix my inflatable Intex kayak which, despite its claimed "US Military grade" (insert Vietnam joke here) pvc, mysteriously punctured on the inside with no explanation. Was somewhat sceptical having also tried to fix my last Intex kayak (which also mysteriously punctured) with epoxy resin, without success. Anyway - this stuff got the job done, and I am happy to report that i've successfully not drowned on two subsequent kayak trips. You don't get a huge amount in the 3 tube packet, but you don't need a lot, at least for my purposes. Recommended and thanks for prolonging the life of my kayak!

Ik heb deze lijm gekocht om mijn leren kussens te plakken, echter plakt het op mijn handen en alle andere materialen die ik aanraak, maar helaas niet op mijn leren kussens. Dus van mij krijgt dit product maar 1 ster.

I use this product to build up worn spots in the soles of walking shoes. I tend to walk off the outsides of heels. This product fills in those wear spots and is harder than the original rubber/foam surface, thereby making the shoes more durable. IMPORTANT to know -- this is a "self-leveling" product. It flows like water, only very slowly. To fix heels, wrap the outside with masking tape, as a dam to keep from running down the side of the shoe, then prop the shoe up so the filled area is perfectly level with where you want the material to level out. After a few hours, the material sets up to where you can move the shoes. I usually put them over a heat vent to cure - 1 day is best. They'll adhere to almost any surface and could have a LOT of uses, but building up worn soles on shoes is one place where the product really shines.

Meine Gummistiefel sind wieder dicht 😁 Es braucht schon ordentlich Kleber, aber es bringt definitiv was! Kauf lohnt sich.