Siless 80 mil (2mm) 18 sqft (1.7 sqm) Car Sound Deadening mat - Butyl Automotive Sound Deadener - Noise Insulation and Vibration Dampening Material (18 sqft)

Comparable quality and performance to name brand competitor. It sticks on strong, easy to apply, and does make a difference in sound reduction. Turn your hollow shell sounding vehicle panels into solid sounding walls.

This is an excellent product. Easily moldable, cuttable with good scissors or razor knife, very sticky, works great. This pack was enough to do all 4 doors on a crew max truck, and I went wild on the fronts. I used 9 peices on each rear door which was just enough, and the rest on the fronts. I doubled up layers and even used some on the back of the door panels. If you follow the instructions and dont go wild you might even have extra left over. It works just like you would imagine. Without doing the entire cab there will still be road noise but this helped noise, better audio, no buzzing door panels, terrific improvement. It is kind of heavy, so extra weight is added to truck, but that really isnt a bad thing. It is noticable but in a good way. Get it. Use it.

Let me start of by saying WOW! This made a huge difference in the SQ of my L7S pushing 930w rms. Before I had major rattles in my 2020 Honda Civic SI. Taking the time to do this to my trunk and Lid made me realize just how loud my subwoofer actually is. It literally eliminated the rattles throughout my whole car. I still plan on doing this to my doors and rear deck but once I upgrade the speakers. I still have half of the box just doing the trunk and lid so 1 box of 36sf will be enough for most of the areas that need to get done. You may need a little more overall. This is true 2mm spec. Very sticky and easy to apply. It just take time to finish the work correctly and roll it down. It is not as heavy as I thought it was going to be. The size of the sheets are perfect for what you need to do. The value is on point for the quality. It does not rip very easily but you can cut it to size without any problems. Again, This is a must buy for anyone who is pushing 1000w rms or more.

Summary: Great quality product, priced right. Cuts and installs easy-follow the instructions people!! PRO TIP-you don’t need to cover every square inch. OVERKILL!! Think about it-when a bell rings you could put your fingers on the edge and silence it right? Same rules apply here. A strip or square will isolate the vibration and notice when placed correctly— knock on the surface and see what vibrates or what part makes the loudest drowning and that’s a good clue of where you should put a piece of this…unless you’re trying to use it for temperature insulation no need to go ape on it. If you look at the bottom of a stainless steel sink, it’s got a stripe or a small sticker of insulation that keeps it from rattling. You can do that here. What’s important to note is the instruction specifically say use a roller to roll the ribs out until it’s smooth that way you’ve got maximum adhesion. I see a lot of pictures and videos from people that finished their install and didn’t follow this simple instruction. It makes sure that it’s stuck down before you put all your paneling and carpet back in and it’s a small step with a cheap wooden roller it’s easy. I’ll say the installation with this product is a breeze. You can use sharp scissors or a blade. It does get gummy after a while, and you may need to clean off your blade or your scissors, but it cuts very well and the ribs make it easy to size in space the thickness is fantastic and the backing paper comes off quite easily. I’ve done lots of installations with Graphics emblems you name it and this product is very easy to use and represents good value.

Easy to roll out. Works great Why did you pick this product vs others?: Fair price for the amount of coverage, good quality Works well: Easy to install, rolls out great. Forms to contours well

I used this on the doors of a Toyota Tacoma, worked as it described. Reduced the road noise significantly.. Need to buy another box for the floor and roof of the truck..

I use this on many builds to dampen the metal echo in cars, vans, and trucks. Just one sheet in the center of a body panel is a huge difference maker. You can also cover the entire surface and get added insulation value. The noise is greatly depleted and it's easy to install with a roller tool. Looks Great when done. Good Product I will use again!

This is by far the best sound deadening I've ever used. This stuff is very thin compared to most other brands. I used one third as much as I did for my other car and it is/was perfect. Not sure where the secret is but I was amazed. Excellent product, life time customer made. My roof was vibrating and violently flexing from my subs. I did the entire roof under the liner and it's a different car... Perfect

Quedo bien beuna calidad, fácil de instalar

Tried to sell a lower quality product compared to the description

Great product, very easy to work with, highly recommended

Not really worth it. Very little difference in noisec reduction.

Excellent product, easy to apply, used to line 3 furnace closets to minimize any noise.