PA03586-K983 PA03586-K984 Scanner Paper Feed Roller & Exit Roller with Shaft Compatible with Fujitsu S1500 S1500M fi-6110 N1800

I've had a Scansnap S1500 since 2011 and have been really happy with it. I use Linux, can drive it no issues and on the whole it has very few jams and has just kept working. Last weekend, it made some odd noises, and soon afterwards it stopped feeding with a jam which revealed a gooey feed roller. One roller had de-generated to goo really quickly - last week, multi-page scans - at the weekend, unusable. But 15years...! After that lifetime I'd have bought another Scansnap in a heartbeat, but I kinda value the planet I live on and didn't want to consign another gadget to the dubious local recycle efforts without giving it a last chance. So I ordered these rollers and did some YouTube research. A few days later, I have a working scanner again - and it works really well - as good as new! The rollers seem well made, one was about 2mm off-position but it doesn't snag the case, and fit the bushings perfectly. I can't say it was easy. It's a couple of hours breakdown to get to the rollers, and lots of parts, and the biggest challenge I had is that 15yr old ABS lugs are unforgiving; quite a few broke. But by ensuring that those parts affected were supported in other ways (reattaching the internal metal chassis), it seemed to hang together well. These were right-priced and worked really well and I really appreciate that these are available to prevent waste of what is otherwise still a perfectly serviceable scanner. Hats off to Fujitsu for making this possible - please don't make future units non-repairable - I'll be back as long as your products carry on supporting our planet!

The rollers fit perfectly. But it is a tedious process to replace the rollers. There is a good video by the OKLILI company that sells this product that goes through the whole replacement process. It will take a good bit of time and patience to replace these, but for me it was worth the time. Rather than spending hundreds for a new scanner, this $20 product made sense to me. For me, it was worth the time. My scanner is probably about 20 years old. It has worked fine till recently and I saw that the feeder and exit rollers were all gummed up and that screwed up the scanning. Fujitsu doesn't recommend replacing these rollers....I think they would rather sell you a new scanner and they really didn't design it well for replacing these. I replaced these in a couple of hours, and it took some careful disassembly and reassembly. But the scanner works great now....and hopefully for another 20 years or so.

Replacement parts for an older machine. Works as advertised.

Works as expected. purchased 10/23/25. still working good on 1/7/26. To replace this part it was a pain, because it requires a lot of disassembly. clear off table. take pictures. and there are a few youtube disassembly videos to follow. took me a few hours. maybe even 3, I forget. I tried purchasing just the plastic part, but those were too big. this is the way to go.

The rubber outfeed and guide rollers on the scanner broke down and turned gummy and sticky. These fit perfectly and eliminated the paper jams that the old rollers were causing. A bit of a trick disassembling the scanner to install these but a lot cheaper than a new scanner.

These rollers are perfect replacements for my s1500 scanner. The install was complex and it’s hard to find a good English install guide. The scanner works like new.

SnapScan S510 Exit rollers and shafts (upper and lower) fit my S510 exactly. Note, the seller's description does not list the S500/S510 series, and in fact has another listing supposedly for the S510, however that other listing is not correct. This is the part you want for the S510. One star off for the incomplete listing, otherwise a quality replacement part. YouTube has a few videos of disassembly. Swapping the rollers is a bit involved but doable in an hour or so. Take your time and don't force anything. Tip: Take pictures as you go and lay out the parts in order of removal. I suggest purchasing the rollers and shafts together (this item) rather than trying to install the loose rollers.

Excellent repair after I ordered the part from amazon of the feed and exit rollers of a Fujitsu / Ricoh Scansnap s1500 compact duplex desktop feed scanner. The part was difficult to find, but this part had good reviews on amazon for this specific model s1500 scanner: Product Name: Feed Roller & Exit Roller with Shaft, Compatible with fujitsu fi-6110 N1800 S1500M S1500, OEM code / Part NO: PA03586-K983 PA03586-K984 - ABC Computer Services (in NYC) had a fair price and picked up the scanner in a box I gave them and changed the part taking most of the scanner apart down to the boards, and then returning it back after a few hours, and returning it in like new condition. The appt was easy to set up a few days after I contacted them, and the online payment was convenient. The scanner exit/feed rollers had melted after years of use and become sticky and were catching the paper after fed once, and now it can again take 50 continue sheets to scan without jam, and works like new, like the highest rated Scansnap scanners. I like the look and compatibility of the s1500 over the newer models, and saved part of the $400+ expense of a new model.