ERYONE Silk PLA Filament 1.75mm, 3D Printer Filament PLA, +/-0.03mm, 1kg(2.2lbs)/Spool, Silk Gold

The colour is great but it was poorly wound up - it kept getting tangled while printing so required constant attention to avoid ruining long print. The problem seems to be the poor manner in which it is wound up - not as tight and uniform as other brands we use. Maybe a one-off but would put us off buying this brand again

Lovely PLA I used settings 220 and 70 for board it’s cold in our house, no listing or stringing, printed beautifully

This is a beautiful blue-silk PLA. It comes out somewhere close to turquoise and can provide an amazing sheen.I went to the effort of sanding one of my prints through the grits all the way to 3000 grit, and was rewarded with a beautiful blue, mirror finish. The reflection was unbelievably clear!It can be a bit awkward to print some items, it likes to swell a little and then contract. I haven’t had any issues, but some may.Be careful with the adhesion.. this stuff really LOVES to stick to glass beds. I had to remove my glass bed and freeze it to get one of my prints off.. better use glue-stick or another release agent, lest you shatter your glass bed.

Great filament and colours .Never had a problem with eryone filament and printing on sidewinder x1

I have two 3D printers and this didn't work on both. Didn't stick to the bed and very hard even gone through the nozzle of the printer.I'm new to 3D printing but ever other make of reels I've purchased has worked well everytime. Not slating the company at all, but it didn't work on both my Voxelab Aquilia x2 printers.Good service with them, after buying next day delivery etc

One of my favourite filaments i have bought prints well and looks good i give it 5 stars plus

I have used Eryone a few times before and it has always given me a good reliable standard of print and I think there silk rainbow filament is no different.I printed this filament at 195 degrees without any issues. If there are any issues with the prints its normally my user error which can be removed with a little fine tuning of retraction etc which is normal when you change filaments as they use different additives.The things I look for in good filament when I get it is a consistency of the thickness of the filament which in this case should be 1.75mm. You can see this filament is within the tolerances they claim and I measured multiple places along the filament and it remained pretty consistent. (I have added a picture to support that)The 2nd thing I look for is how the filament lays down on that critical first layer. The rainbow filament is beautiful when it lays down on the bed (I printed at a bed temp of 50 degrees) but don't take my word for it check out the added picture.In general you can see from the images the smooth shiny surface you would expect from a silk filament and I have added some pictures so you can see the colour change and what you can expect when you print this filament.If I had any negatives it would be that I felt I was missing the blues from the picture showed however this is a very minor issue and may have been just my one roll.One further thing I would mention with Eryone is there great customer service. I have had a bad roll from so many companies usually due to moisture and it can happen to any company you buy from. What I would expect from a good filament company is that the company replaces that roll if its very bad without fuss (although I will normally try a dryer first) Eryone have always had for me one of the best responsive and easiest customer service to deal with.This is an easy choice to buy this filament and if its on one of there deals snap it up and have fun printing it.

Watching my printer purge ready for print, I thought "yeah, this isn't going to be like the images I've seen" as it looked more grey than shiny, BUT.... watching the first layer, you could see this was definitely going to be ok shine wise (better than I thought)Only thing I noticed, and its probably human error on my part, was the little blips in the print (see second image).Other than that it sticks to the bed nicely and the shine is a lot better than I thought it would be.I'll see how this spool goes while tweaking settings to get rid of the blips, but I'm 99% sure I'll buy this one again and give full 5 stars