Screw Removal Pliers PZ-58 Neji-Saurus GT 160mm - Extractor Tool for Stripped, Damaged & Rusted Screws - Side Cutter & Spring Loaded - Made in Japan

Saved my hair from falling out. Amazing product!

Bought these as had a screw I was struggling to remove as the head was chewed and another where the head had broke off completely. These pliers allowed my to grip both the screw head on one and the threaded section on another and get them removed as needed. Didn’t slip or move once during use and grip very well. And for the price you definitely cannot argue!

Brilliant! Does what it says on the tin and does it well.

In spite of the combi plyers tag; except for the wire cutter function, these are not the engineers 'combi plyers' with fence wire cutters and flat jaws for straightening out kinks in metal sheets etc.. They are purely Screw Extractors, and work well in this regard. They do however need about a millimeter of edge to the screw heads in order to grip and extract them. You can always knock the edge of dome heads up with a chisel to resolve that, and It has to be said , they are a very good screw extractor

Wow - I wasn't expecting this to work as I had a threaded, smooth head rounded screw/bolt on the handlebar of my motorcycle that I could not get to budge and remove using all sorts of methods described by various google results. I wasn't expected these to work either but thought it was worth a go since I really didn't want to start drilling around the motorcycle handlebars. The first time it didn't work, but second attempt I applied as much squeezing pressure as I could and with a bit of careful force the screw turned and I could remove it - amazing! The tool didn't slide around, it gripped perfectly on the very small area available to grip. Definitely living in my toolkit from now on - wish I'd ordered a pair sooner !

Worked absolutely brilliantly and got a stripped screw out without trouble.

I recently went to clean my Honda CRV Mass Airflow Sensor (MAF) to improve my vehicle's performance. The problem was that the screws i needed to remove both had stripped heads. After numerous attempts with various screwdrivers and suggested ideas including youtube videos i was about to drill the screws out. As a final attempt I invested in a set of ENGINEER pz-58 Screw Removal/Extractor Gripping Pliers, and I must say, it was a game-changer. The design allowed me to comfortably grip and extract the worn MAF screws with ease. I was overjoyed with the results. The robust build quality and durability, versatility, and efficiency in removing stubborn screws make these ENGINEER pz-58 GT neji-saurus pliers an essential addition to any toolbox. Very Highly recommended for removing Any size of worn or stripped screw. Image shows removed stripped screws on left side next to New screws fitted.

Had a couple of crews that had threaded, both Philips head and flat head screws. Tried the usual screw extractor drill bits that you see online were you need to drill a hole in the top of the screw and then use a reverse head drill extractor. They were all hit and miss, more miss in my experience. In fact they failed to remover screws and made the job harder by damaging the head totally. These ENGINEER pz-58 GT neji-saurus screw extractor pilers. Now these things a pretty neat. I've been able to easily remove one and a half inch screws from an outside flood light that had rusted and the tops had rounded. I've also use them to remove inch long screws (5 in total) from and inspection plate under a Honda civic which had ceased in place to the plate and the retaining clips. The screws had a head the sice of a 20p coin. I've also managed to remove small rounded nuts the size on a 10p coin with these pliers and so WD-40 penetrating spray. Thats not what they're for but they did the job. Well made with a quality feel and comfortable handle. So good I bought the ENGINEER PZ-65 Neji-Saurus mole grips.

very nice pliers , high quality and surprisingly not small , which is a plus.

This plier is highend product because its cost so high, beyond imagination, for special purpose use expected

Lätt och smidig

Fantastica pinzetta per svitare viti incastrate o con la testa non più operabile mediante il normale giravite. Personalmente l'ho trovata molto comoda ed utile specialmente in tutti quei casi laddove non è più possibile svitare una vite o bulloncino con un normale utensile in quanto la testa si è rovinata. Ringrazio innanzitutto AMAZON che come al solito è stata fantastica per quanto riguarda i celeri tempi di spedizione, l'imballo e la qualità dei prodotti consegnati. Quante volte capita di usare il cacciavite della misura non corretta o magari di operare su viti corrose o troppo dure in modo che l'usuale cacciavite non ha più la giusta presa sulla testa della vite. Ecco, in tutti questi casi e non solo, questa pinza corre in aiuto del malcapitato rivelandosi un valido ausilio per completare il lavoro. Si tratta di una pinza (meglio dire pinzetta) molto semplice da usare, di robusta costruzione e con la dentellatura studiata per fare presa anche nei casi un po' più difficili. Ha anche una molla che consente una facile apertura durante l'uso. A me è servita in molte occasioni e mi ha dato sempre una grossa mano di aiuto. Dal mio punto di vista ed in base alla mia esperienza, può essere tranquillamente usata in diverse posizioni ed in tantissime occasioni. La marca è una nota marca giapponese sinonimo di qualità, l'impugnatura è ergonomica ed offre, a mio avviso, una buona presa evitando che la pinza scivoli via dalle mani durante l'uso. La dentellatura delle ganasce (tra l'altro fatte di buon acciaio) conferisce un ottima presa sulla testa delle viti e dei bulloni che devono essere rimossi. Nel mio caso ha perfettamente contribuito a soddisfare le mie esigenze. L'ho già usata svariate volte e mi sono sempre trovato bene riuscendo a portare a termine il lavoro senza eccessivi sprechi di tempo. Secondo me è un articolo consigliatissimo.

Very well made tool, pleasure to work with and great finish. Quality product!