EVERBRITE 16 Oz. Clear, Protective Coating for Metal (Pint)

We have powder coated brown fences and gates. We live in South Florida exposed to the salt and extreme heat . Over the past few years we noticed the fence and gate lost there luster . We applied Everbrite and they look like brand new. I was amazed at the results. Cannot be happier !!!

Works great, dries even with no streaks. Applied over a month ago and no sign of tarnishing on my copper cupola, still brite and shiny.

This stuff is expensive but it sure works as advertised. Brushes right on with a brush or foam brush, then lays flat and smooth. Dries to a smooth, non-sticky, glossy finish. I'm impressed. I was going to put on like three coats but I ended up only using one coat because it seems to make a nice thick layer. Seems very protective. I look forward to seeing how the bare metal parts that I coated with this hold up over time. So far they are not showing any rust at all. Thanks Everbrite!

I used this on some barn steel. I wanted to save the rust and make it all look shiny and prevent it from rusting further. The product is easy to work with and it looks great. It has a wet look and and the rust pop.

Waited 8 months to write this review purposely so it could be as accurate as possible. It has been exposed to snow, sleet, rain, hail, subzero temps and 100+ degree in direct sunlight most of the day. Used this to seal the copper on a brand new cupola on my garage. Cleaned copper with acetone to remove any oils rolled on 3 good coats and the copper still looks like the day I did it. Stuff definitely works. Make sure you do it on a calm no wind day or inside your garage if you can move your project inside, stuff gets really sticky as it’s drying and if anything blows onto it it’ll stick. Was worried I wasn’t going to have enough to even do 2 coats but a little bit goes a long way. I still have left over even after the 3 coats on the cupola and also did 3 coats on the flashing around my chimney and that still looks brand new.