Pacer Technology (Zap) Flexy-Tips 24 Adhesives

I work a lot with cyanoacrylate adhesives and these tips are indispensable. They get into those tight spots where the bottle nozzle won't go. If the tip clogs a little tug on the hardened glue at the tip will usually unclog it. And if the clog won't dislodge you can always cut the tip just behind the clot and press on like new. And here is the most important feature. You get twenty-four (24) of them. For the cost of six tips from some other sources you get twenty-for! I consider these a must-have item.

I was always spilling gobs of CA glue on things I was gluing (especially when I use the thin glue). After I started using these tips I am amazed how controllable it makes my glue application. I was afraid that I would have to change the tips a lot, but a little piece of scotch tape folded over the top stops it from drying, so I am using the same tip for over a month!

These are great in order to get small amounts of glue into tight spaces when model building. They are single use and they come in handy.

Just got to try these out last night on my half empty bottle of zap a gap. The old tip had started to wear out after trimming with the hobby knife to remove buildup and I had to remove so much that the flow was way too much for miniatures. You can really be exact with these things - just the right amount in just the right spot. Definitely will purchase again.

Easy to use saves me a ton of money as there’s no waste If the end gets clogged snip a tiny bit off and you’re in business again

The tips work very well for tight places. The problem is when your done unless the glue has all receded into the bottle you end up with a blockage do to the small opening. I bought a small glass pant mixing bottle i found at the hobby store it about 1 or 2 oz. big enough to put the tip into. Fill the bottle with acitone and put the tip in it ( I left my used tip in for 24 hrs) and no harm came to the plastic tip. Just blow it out with can air and you are good to good.

ZAP CA glue is great for model wood ship building. The tips work well with the medium CA allowing you control the amount of glue to the target area. I tried to use them on fast CA and almost glued my hand to the ship hull. The glue shot out like Spiderman web. It reminded me of a superglue prank gone horribly wrong during an army posting in Germany 1979. When with a group of ROTC lieutenants we found my West Point grad room_mate inebriated passed out on his side wearing only his class A birthday uniform. Close at hand were a wood yardstick and bottle of military grade M100 all purpose superglue. Always an inquisitive sort and drawn to field experimentation I grabbed the yardstick and glue thereby adhering said Westpointers hobby howitzer, thigh and to my horror and gasps of onlookers.....yardstick in a chemical weld. For part two of this review see. :fingernail polish remover

I've been assembling small scale miniatures and these babies have been the difference between me maintaining my tenuous grasp on my sanity or not. Easy to use on multiple brands of adhesive containers and long lasting. These are a must for any model builder!

Absolutely brilliant. I would say these were essential items.

Nowadays these come free with most ca glues but these are quality and better quality control probably but should be double the amount for the price in my opinion, due to 3 to 5 been free with most cheap glue brands. A choice of lengths or a mixture, say 2 or 3 of each length would be nice from a leading brand for this price. Also a little paper clip helps squeeze glue from the tips to stop clogging, hope this helps.