303 30520 Convertible Top Cleaning and Care Kit for Clean/Protect Fabric Tops

Just used this on a blue soft top. It’s restored the colour vibrancy as well as making it excellent at repelling water. Recommend the 303 brush for cleaning the roof as well.

It cleaned mould off the seams on convertible roof instantly.

Used this on my daughters soft top. Liberally sprayed on, left for 20 minutes, then used a drill brush to agitate. The roof came up better, but still didn't get rid of some stubborn marks which I reagitated over and over. Not as good as I thought it would be, and will probably try Fairly Liquid next time.

Wow , this is an amazing product, used a couple in the past on well known products, but as you see for yourselves this is absolutely brilliant bit of kit , didn't know my roof was this green untill I used this product... results are amazing ...

Excellent product , easy to use and just follow the instructions . It brought back a tan hood from very discoloured to as new condition. Very pleased and would recommend highly.

Probably made a mistake with previous cleaning solutions I have used twice before this product is used, and if I would started straight with this cleaner, maybe it could be better. Read and follow instructions. More water on the soft top before applied cleaner is better. I washed my after rain.

Works well on my convertible hood. You don't need to use much. Just wet the hood with some water then put about three squirts of this across the roof, use a wet brush or something to work into a foam across the roof before rinsing off. Shifts the bird droppings and any green mould.

Made sure you get any green off first

I read a lot of reviews about the 303 products s ok I thought I would give them a shot. I followed the instructions, sprayed the roof, let it sit for a while then agitated it with a brush, rinsed the roof off and it was spotless! Very easy to use and did a great job!

Fast delivery. Researched first and this was recommended. It done the job perfectly My rag top looks like new and is waterproof again. Would recommend

303 is a solid performer. I use it on the dash board and other car parts. I also spray and wipe it on the sky light, vents, and vent covers on my RV. It prevents aging and yellowing on the RV parts, which are exposed to constant sunlight. Good product. Toss your Armor All.

Very impressed and will continue to use. I read a LOT of reviews and figured this is about the same quality and ease as the RaggTopp product for the same purpose. The only reason I went with 303 is because it has more stated uses (basically anything plastic and then some). I will pass a few tips along for applying to a convertible top. The cleaner works great, just follow the easy directions. You don't really need this particular cleaner to clean the top, but it's cheap with the kit. Tip: Use a VERY soft brush or non abrasive sponge to clean all tops, no matter the soap you use. When drying, use a chamois towel by draping over areas, remove and wring out, drape again, until dry. A regular towel works to dry but not as easily. Dry down in the cracks where the top tucks into the frame (usually just push a little into the crack, nothing too forceful). Don't worry about overspray with the included cleaner. Dry in the sun if you can -- just make sure it's dry. Now onto the vinyl dressing. Some people put plastic all over the car to prevent overspray, which will certainly work but seems like overkill. If at all possible, do this step inside the garage. Temp must be at least 70 deg. I recommend two microfiber clothes to take care of the process (size of a wash cloth, roughly 12x12 inches). A similar size piece of cotton t-shirt can substitute for the microfiber, but use a bigger piece of t-shirt if that is what you dry with. If you squeeze the spray bottle SLOWLY, it will come out without spraying everywhere (assuming inside a building). Don't spray near the edges of the top. You can spray directly on the top, or spray into the applicator. Always spray into the applicator cloth if doing this outside to prevent it from going airborne in a big way. Again, spray SLOWLY. I believe the key is to work in an area approx. 15x15 inches: wet it, then dry it. Spray on, spread with cloth, or spray on cloth and wipe on, then use other drying cloth to dry. Repeat until done. Around the edges, windows, front of top, etc., always spray on the cloth and apply so no overspray occurs. The applicator cloth becomes soaked after a short while, so it's easy to use it for detail work without having to spray into it constantly. If you accidentally spray the paint or window, simply use your drying cloth to wipe off. You don't need crazy protection from overspray if you simply get it off before it dries for a while. If you really want to be particular, have a bucket of soapy water and sponge the overspray off. But if you are careful to begin with, overspray isn't a big deal at all. I have done it with success on my Miata, and it only took about 15 minutes of work for the dressing. And I was quite picky to get everything perfect. And when you are done, use this stuff on all the seals around the top, windows, doors, etc. They recommend wiping it on and let it sit for about 5 min before drying. I used the same microfiber cloths after I did the top since it's much dirtier work. And if you have even more time, use the stuff on the entire interior plastics.

Cleans great and the protection beads up nice. Very easy to use and this company makes excellent products! Dries fast!