Kair MultiFan In Line Fan 100mm Standard

After a bit of a trawl through the available options, I chose this Kair MultiFan In-Line Fan to replace the unbranded one that had failed after over 15 years of service. The Kair MultiFan I chose is the 125mm version with a timer. It was a cinch to fit and wire up with different power setting choices. The fan unit itself separates from the mounting bracket and duct connections to allow easy positioning and fixing. The fan unit then slots back in between the duct housings and is secured by simple retaining clips which are held in place by small screws provided. The instructions were pretty easy to understand after got my head around them. I opted to wire it up for full power which involved reattaching the existing cable to the Neutral, Live and Switched Live terminals. A little plastic screwdriver is provided to alter the timer setting. Out of the box the fan turned off after about four minutes, a simple turn of the control adjusts the timer duration which I have now set to about eight minutes. It does the job of keeping the bathroom from steaming up far better than the previous fan had ever done and the noise level is only slightly higher and by no means unpleasant. It comes with a two-year warranty and only time will tell how long it lasts but, so far I'm very pleased with my purchase. Thank you.

Bought this as a replacement for a previous inline fan. Searched for the greatest extract rate and this one stood out. Arrived well packaged instructions were straightforward and thus far it has worked well after around 9 months of use.

Good quality product. Thank you

First up, my bathroom has never had an extractor fan and desperately needed one. I'd been running a dehumidifier after every shower. I wanted an extractor to run on a timer facility, so went about taking a permanent live feed from the pull cord to a new isolator in the airing cupboard. Switched live was taken from the light to the isolator. The screws on the Kair extractor fan cover to expose the wiring terminals were very small but with the right screwdriver a doddle to undo. Wiring was straightforward and much easier than core drilling the gable end in a tight space. What I really liked was the ability to leave the fan body wired up in the loft space but bringing the fan chassis stand assembly of it down to the landing. This gave me improved workspace and where I screwed the chassis onto a board. I also connected the 1m flexible insulated ducting and then reassembled the fan back into the chassis in the loft. The board was then screwed down into position but sitting on some rubber grommets I had from a previous job. I set the fan timer a couple of times. First setting ended up running for 20 minutes after lights out. 2nd attempt had it at 12 minutes. Bit of trial and error getting it to the time you want it to run for. Thankfully, just a quick job to adjust. Extraction from the 100mm fan is very good. The fan itself isn't noisy but the suction sound is. It'll easily hold a piece of paper to the ceiling at the inlet duct, so plenty powerful. With the bathroom door closed and from other bedrooms, I can barely hear it. It's doing exactly what I wished for and I haven't now needed the dehumidifier. This item in my opinion was a fantastic price and I'm happy with the quality and performance from it.

Good quality and robust. The fan was easy to install and powerful without being noisy. Offers good air exchange rates. Excellent for the price.