Hyber&Cara 2 Pcs Safety Wash Bottle 500ml Plastic Squeeze Bottle for Lab, Plant Watering, Tattoo Wash, Bonus A Silicone Funnel

They are good quality and work well. I make my own eliquid and use them to decant into smaller bottles. Time will see how long they last but they seem pretty robust.

I own a couple of wash bottles that have the red plastic tops and a screw off spout, problem with those is they like to dribble after you have used them, and using solvents in them mean they will evaporate over time due to the nozzle being open.So i decided to get a few of these traditional laboratory style wash bottles, but made sure they have nozzle caps, as these ones do.I use these with 99.9% pure Isopropyl Alcohol and 99.8% pure Acetone.Filling these wash bottles was so easy thanks to the included silicone funnel, which folds into itself after use and sits nicely on the top of a 1 litre bottle of solvent.After squeezing these wash bottles, there is a very slight dribble, about 2 drops,This is much better than the other bottles i was using which would drip for about a minute and create a puddle,This is because with these wash bottles the nozzle stays primed after first use,where as with the red topped bottles they drain back into the bottle, which obviously means the solvent in the down pointing nozzle will drip out onto the bench.And the nozzle caps are the icing on the cake, they fit on the end of the nozzle nicely and seal really well, i gave a bottle a good squeeze with the cap on, and it did not pop the cap off like i was expecting.Just be sure to fully tighten the filler cap after filling these wash bottles up, they do take about another 3/4 turn after you think they are screwed down, but this will be obvious as air will be pushed out around the cap instead of the solvent up the nozzle if the cap is not tightened enough.When the filler cap is properly screwed down the nozzle will not lose it's prime, hence there will be minimal dripping after squeezing.

Used this to wash something from an eye. Nozzle put just right amount of water in. Very helpful

I bought this set to use in flushing my airbrush and to prevent me spilling water all over my desk! They are really useful and worth having. I will probably use the others for storing diluted pva glue, but certainly not nuclear waste or biological warfare agents.

I bought these to help clean my airbrush. The bottles are easy to fill and use. The plastic is soft so you can squeeze it so the water comes out well. I like that there is a cap to cover the nozzle. The bottles are easy to clean and can be used for many different jobs. I like the shape of the nozzle too it is the right size for my airbrush. When you squeeze it you get a good flow of water or what ever liquid you have in the bottle. Cant fault, does what I need it to do.

ok

These cheap bottles work really well for mixing my homemade thinner, airbrush cleaner and paint extender.

Was as described