Arthome Heat Blocking Window Film Anti-UV 60cmx460cm,Heat Control Window Stick Tint Reflective No Glue Static Cling Adhesive DIY One Way Film for Home and Office Sun Glare Reduction with Tool

Sooooo I only bought 1 pack of this as I wasn't completely sure it would actually help with my inferno of an upstairs but it does. The pack contained enough film to do 1 floor to ceiling 3 foot window with enough left over for a standard small toilet window. I got the blue tint and it does darken the room which as a shift worker is actually an added benefit and has reduced the room temperature by a few degrees. I will be ordering more to cover all my upstairs windows. It can be quite fiddly to apply especially if you are trying to do it on your own but it is do-able. I would say that you cannot put too much water on the window!!!! Spray then spray again.........and again!! Oh and I haven't had any birds hitting the window because of the reflective surface!

I bought this to add some shade to a hard to reach velux roof window. Despite the height and angle I had to work at this film was very easy to fit. I cut it to size first rather than trying to trim it in situ but this worked incredibly well and I could make slight adjustments to the positioning. The film blocks out quite a bit of light so it makes the room a bit dark on dull days. But it is very good at reducing glare on sunny ones. Given how easy it is to install I am tempted to take it off in winter and put if back in summer when it's really needed.

Easily applicable no adhesive but for the last year plus the film has not come off ..there are a few issues with corners and I’m unsure as to if it absorbs all the heat but I do think there’s a significant difference in the kitchen, which can get hot in the summer .i found this product remarkably easy to apply considering some other products of the same nature the price was ok the main issue I have for personal reasons is the problem with cutting straight lines and the fact that if one wishes to remove it it would be quite difficult to put it back on the lining paper for use in the future

I’ve had this for nearly two years and the mirror effect has degraded from the sun. Still tinted and dark but it’s starting to become opaque

We have four large skylights in our kitchen and dining area, giving us the feeling of being outdoors. However, the UK's summer heat has become unbearable, making it almost impossible to sit in this space. We installed these window films, and they work like magic. The light is reduced, but it's pleasantly cool without being too dark. I should mention that the installation is incredibly easy. I'm terrible at installing screen protectors—I even messed up my Apple Watch protector—but installing these films was a breeze. The key is to use a lot of water, both below and above the film. It might sound odd, but the films are applied from the outside, or at least that's how I did it. This product is amazing, and it comes with all the necessary tools included.

Bad quality, Film scratches too easily and doesn't have a mirror effect from the outside. Also looking out from the inside vision is not clear

Last autumn I built a garden room with south facing windows. Obviously come summertime it gets unbearably hot in there so I bought this to help keep the temperatures down. Only time will tell whether this alone will be enough or whether (and I suspect I will) need air con in there too. Anyway on to the installation. I thoroughly cleaned the glass and gave it a good scraping with a razor blade to get any bits and bobs off. I cleaned the glass one more time and then cut my film to a rough size. I then soaked the window and the film with a water/Johnsons baby shampoo mix from a spray bottle. The film went onto the glass and I could slide it into position. I then used a squeegee and got all the air bubbles out from the centre towards the edge. Finally I cut the excess off with a stanley knife and voila! The film was initially very hazy when looking through it but jump forward 24 hours and its cleared up no end. In the short time it's been up it has made a difference to the temperature in my garden room. Only time will tell whether this difference is significant enough to get away without buying an air con unit too. I'll edit this review accordingly when it's been tested a bit.

Easy to install when you get the hang of it. Put it on the windows of a very hot summer house. It really made a difference to the temperature in the summer house. Really cooled it down. Going to use it on the lantern in the sun room to keep the glare and heat down.

This doesn’t work. Impossible to peel the backing off so it doesn’t stick.

فاميه مرايه ومعاه كاتر كما بالوصف بيحجب اشعة الشمس علشان بيعكس الاشعة زي المرايه تقريبا

Found it easy to apply & use. Definitely a two person job though to make sure applications go smoothly

ENTREGA: Me llegó antes de la fecha comprometida, bien empacado. Trae las herramientas necesarias para la instalación (una cinta métrica, cutter y un plástico auxiliar) GENERAL: Pueden ver en las fotos que realmente refleja como si fuera espejo, ayuda a captar rayos del sol y reduce la iluminación y la temperatura. Todo lo anterior es muy notable a simple vista y tacto, eso me agradó. Continúa leyendo para evaluar los comentarios negativos de los demás... INSTALACIÓN: Creo que aquí es donde la mayoría se queja del producto. 1. Es un plástico sin pegamento, unilateral (es decir, solo es de una vista), enrollado. 2. Para colocarlo, RECOMIENDO, enrollarlo pero a la inversa para "aplanarlo" lo más posible y que sea más fácil. 3. Ve videos de cómo instalarlo, pero en resumen sigue los siguientes pasos: A. Limpia perfectamente tus vidrios procurando no dejar polvo, marcos y áreas cercanas al vidrio y deja que se seque B. Prepara una mezcla de agua jabonosa en un atomizador (yo utilicé detergente de trastes Sal-vo) B.1 Aprox... 100 ml de jabón + 900 de agua LIMPIA C. Desenrolla tu plástico, toma medidas de tu ventana, y recomiendo dejar un margen de 3 cm de cada lado. D. Ya con tu plástico recortado, preséntalo en tu vidrio, es decir, solo sobreponlo (recomiendo usar unos diurex o algo pegados al marco, NUNCA AL VIDRIO) F. Ya que estés seguro que las medidas se aproximan a las de tu ventana (dejando tu excedente que te recomendé, ten a la mano tu atomizador, tu cutter, el plástico guía que viene en el paquete y una servitoalla de cocina o trapo de microfibra para secar tus manos y el plástico del exceso de humedad, créeme, te hará falta. G. REVISA cuál es el lado que vas a pegar, desprende el plástico protector e inmediatamente después vierte tu agua jabonosa tanto en el vidrio como en la cara de tu plástico que vas a pegar al vidrio. H. Vierte todavía más agua jabonosa en ambos lados cuidando que no se pegue tu plástico entre sí :P I. El plástico aparenta estar bien recortado, por lo que te recomiendo utilizar los lados rectos cortados de fábrica y colocar ese lado muy justo de un borde que tú elijas (te recomiendo hacerlo al borde más complicado, por ejemplo, donde está la manija o donde están las agarraderas para abrir tu ventana) J. Trata de pegar tu plástico sin arrugarlo y sin dejar tanta burbuja usando sólo tus manos K. Con tu plástico guía, saca el agua y burbujas de aire siempre yendo de adentro hacia afuera aplicando un poco de presión. Evidentemente saldrá mucha agua jabonosa y puedes terminar empapado, seca tus manos y el plástico guía cuantas veces necesites. L. Corta el exceso del plástico presionando la guía hacia los bordes de tu vidrio y recargando tu cutter, retira el exceso de plástico ya cortado y vuelve a intentar sacar las burbujas de aire y agua. NOTAS: +En ocasiones no te será posible que se quede completamente pegado en las esquinas, para eso te recomiendo tener a la mano unas tijeras filosas y cortar esa pequeña esquina en forma de triángulo, eso facilitará que el resto del plástico permanezca bien adherido al vidrio. +Instala tu plástico antes o después de que le dé directamente el sol, es decir, cuando tu vidrio esté "tibio" o a temperatura ambiente +Sino cortas al margen tu plástico, se irá desprendiendo en los primeros 2 o 3 minutos después de que lo hayas puesto, te recomiendo estar al pendiente y mantenerte intentado pegarlo o revisar en dónde están tus excedentes +Te recomiendo ampliamente instalarlo primero en una ventana que no te importe mucho (una cocina por ejemplo) para que pruebes la complejidad y habilidades necesarias que requieres +Puede instalarlo 1 persona, sin embargo, entre 2 es mucho más fácil.

Très bon produit. Film tactile, se pose à l’extérieur avec de l’eau et une raclette. J’ai vu une nette diminution de la température dans la pièce. Assombri un peu la pièce mais sans excès. Comme il est à pose tactile, il sera possible de l’enlever et de le remettre l’année prochaine.