KINGGERI 300lbs Roof Racks Cross Bars for Honda Pilot 2016-2022

We don't frequently mount gear on the roof so I didn't want to spend a fortune. At the same time, I didn't want a piece of junk, especially something that is attached to the top of your car going down the highway at 70 mph. After comparing various options and checking reviews I discovered this set of cross bars for our '24 Pilot TrailSport and they seemed to be the perfect balance of quality and price. The components are all solid aluminum - no plastic other than a protective bumper strip on the top of the bars. All components were well packaged and arrived without any scratches or other damage. Installation is straightforward although the printed instructions fail to mention the adhesive foam gasket pads at the rail mounting points. Fortunately, it's both intuitive these should be installed and also there are several YouTube installation videos that point this out. The components are marked with both printed stickers and also arrows molded into the brackets indicating installation orientation. The end result is confidently sturdy and good looking as well. While not absolutely required, it is helpful to have two people for installation to avoid any paint damage to the roof. If I had any complaint, it would be the screw hardware provided. The screws seem of decent quality and I did not encounter any concerns of length as a few other reviews seem to mention (though it's difficult to know if they were installing correctly), but the shiny stainless finish kind of stands out against the black finish of both the roof rails and these bars themselves - I would prefer black screw hardware to be included. However, if this is the extent of concern with a product of this type then that shows how good it is overall. A few screws are cheap at the hardware store if I desire to swap them out (or simply apply some dark nailpolish to the screw heads). While we have not yet carried anything substantially heavy or oversized like canoes, we did use it to bring our Christmas tree home recently. The solid aluminum construction of these cross bars would seem to suggest their 200+ lb rating is accurate. While anything mounted to a vehicle's roof will create some additional wind noise, I have found the 'winged' type swept oval design of these cross bars fairly quiet and certainly not obtrusive. In general, I am satisfied with these cross bars and would suggest them to others.

Purchase for a pilot 2021 special edition. Figured out a few tips and tricks to install them. All the parts are accounted for,a screws washers ect. They give an extra one for all parts.The bars and brackets themselves are clearly marked front/back. All very self-explanatory easy to install. The bars themselves on the underside have two adjustable bolts that lock in once they're in the brackets. On the roof of the car I laid out the plastic wrap that the parts come in to lay out the brackets & bars.I assembled the bar to the brackets inside down ,this way I way able to attach the bar and adjust the bolts on the under part. On one side I tightened it with the two bolts. Turned it right side up installed one bracket to the car rack then the otherside was a farther distance with the bar. I needed to take out one of the two screws to get more length on the bar than I was able to attach the bracket to the car and tighten all the screws. on one side by the bracket I have two screws tightened and on the other side to give extra length I have one screw. On the rear/back bar I did it on the opposite. where I have one screw I used two. Where I have two screws I have one. It's very sturdy, good quality. The brackets are painted black, so in a couple spots the paint chipped. It doesn't affect the structural integrity of the function of this car rack. It's aesthetic only There's no rattle when you drive. I have nothing on top of it. This rack will stay up the life of the car. I'll do an update review after I've used it over the summer

Got these to point a rooftop carrier. Installation was quite easy. Took me about 30 minutes to get them installed. Rooftop carrier sit just fine.

GET M6-40mm BOLTS! Here are the measurements I took with my measuring tape (estimations). Front of bolt to Start of Rail: 3/4 in = 19.05mm Rail: 1.25in = 31.75mm Front of bolt to end of rail: 2in = 50.8mm The ones that come with it are 14mm and 20mm M6 bolts. 14mm are fine cause they go into the bar and ends. But the 20mm go into the end holders and into the side rails. They go in but not deep enough. You will need longer bolts. 40mm is perfect. Then you will have the 20mm left over and I recommend using them in the 14mm area. Just to have better support, stability and peace of mind. The Installation was simple, not easy but simple. It’s a tedious process cause I don’t have a hex wrench socket. Just used the included tools. Worked perfectly fine. But once installed they look dashing, especially on a black Pilot. These blend in perfectly. Showed my mom and friends and they said these look Stock. Haven’t tested them yet as far as loading something in there, but I’m confident they can hold a good amount of weight. Very happy with them.

These rails worked fantastic for our Bay Area to SoCal trip. I carried an XL sized Thule cargo carrier. It held it with absolutely zero issues. The quality of these bars are top notch. Directions are easy to follow. Everything is well labeled and it includes all you need. On my Honda Pilot you just need to remove the rubber plugs on the factory rails. Then bolt these one once you get them partially assembled. I’d lay a blanket or beach towel across the roof to avoid scratching. I also used a balled up towel to support the opposite end of the rail. This made it easier to bolt it in straight on my side. No over the top wind noise or anything else. These were a bargain deal and are solid. Much more stout than the factory Honda bars IMO. I’d say to buy them as I’m sure you’ll be pleased.

Fast service. Great fit. Good price good quality. Excellent experience

I love the roof rack cross bars. It makes my car look very sporty. While also making it convenient to all smaller bags without cluttering up the car. These were so well worth it and very good sturdy bar is going across.. The instructions were very easy. They’re very durable. They’re very sturdy. The size was perfect and so far they are rest resistant. You can’t go wrong with these.

The paint is peeling off the metal on the bars and the brackets have started to discolor under the Florida sun. I would not buy these.

Installed these crossbars on my Trailhawk 2026 — very happy with the quality. They look solid and well-made, and the installation was quick and easy. No noticeable wind noise even at 110 km/h. Fitment is perfect for the Jeep Compass Trailhawk 2026. Highly recommend.

Material quality is really good, sturdy and easy to install. Right fit for my car

worked perfectly on my 2025 trax active!!

Great, useful addition to Trax LS 2025. I recommend getting a second person to help mount and screw everything onto the rails. Each part comes with stickers, so make sure you mount the front, back, left, and right sides correctly. Seems fairly sturdy and solid, gave it a good old shake test after mounting and tightening everything on. Comes with its own Allen key if you don't have one. We found it useful to keep the original bar foam and some cardboard when tightening things onto the roof.

Worked great for my jeep compass, installation was straight forward, following direction, and the construction was solid and well worth the price. I am to beleive this will last the life of the vehicle and then some.